Hi,
Le 19/12/2012 19:37, Jean-Christophe PLAGNIOL-VILLARD a écrit :
> The sleep mode will allow to put the add in sleep between conversion.
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
> Cc: linux-iio@xxxxxxxxxxxxxxx
> Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
> Cc: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
> ---
> Documentation/devicetree/bindings/arm/atmel-adc.txt | 1 +
> drivers/iio/adc/at91_adc.c | 19 ++++++++++---------
> 2 files changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt
> index fd2d69e..efb6f02 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt
> @@ -25,6 +25,7 @@ Optional properties:
> - atmel,adc-use-res: String corresponding to an identifier from
> atmel,adc-res-names property. If not specified, the highest
> resolution will be used.
> + - atmel,atmel,adc-sleep-mode: Boolean to enable of sleep mode when no conversion
>
> Optional trigger Nodes:
> - Required properties:
> diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
> index f175a86..c563488 100644
> --- a/drivers/iio/adc/at91_adc.c
> +++ b/drivers/iio/adc/at91_adc.c
> @@ -52,6 +52,7 @@ struct at91_adc_state {
> void __iomem *reg_base;
> struct at91_adc_reg_desc *registers;
> u8 startup_time;
> + bool sleep_mode;
> struct iio_trigger **trig;
> struct at91_adc_trigger *trigger_list;
> u32 trigger_number;
> @@ -455,6 +456,8 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
> }
> st->num_channels = prop;
>
> + st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode");
> +
> if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
> dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n");
> ret = -EINVAL;
> @@ -580,6 +583,7 @@ static int __devinit at91_adc_probe(struct platform_device *pdev)
> struct iio_dev *idev;
> struct at91_adc_state *st;
> struct resource *res;
> + u32 reg;
>
> idev = iio_device_alloc(sizeof(struct at91_adc_state));
> if (idev == NULL) {
> @@ -687,16 +691,13 @@ static int __devinit at91_adc_probe(struct platform_device *pdev)
> */
> ticks = round_up((st->startup_time * adc_clk /
> 1000000) - 1, 8) / 8;
> -
> + reg = AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL;
> + reg |= AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP;
> if (st->low_res)
> - at91_adc_writel(st, AT91_ADC_MR,
> - AT91_ADC_LOWRES |
> - (AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL) |
> - (AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP));
> - else
> - at91_adc_writel(st, AT91_ADC_MR,
> - (AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL) |
> - (AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP));
> + reg |= AT91_ADC_LOWRES;
> + if (st->sleep_mode)
> + reg |= AT91_ADC_SLEEP;
> + at91_adc_writel(st, AT91_ADC_MR, reg);
I'm fine with the code in itself, but since this also refactors what has
been added in the previous patch, maybe you can add it in the first patch.
Apart from that, you can add my Acked-by.
Maxime
--
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
