The sleep mode will allow to put the add in sleep between conversion.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
Cc: linux-iio@xxxxxxxxxxxxxxx
Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
Cc: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
---
Documentation/devicetree/bindings/arm/atmel-adc.txt | 1 +
drivers/iio/adc/at91_adc.c | 19 ++++++++++---------
2 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt
index fd2d69e..efb6f02 100644
--- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt
@@ -25,6 +25,7 @@ Optional properties:
- atmel,adc-use-res: String corresponding to an identifier from
atmel,adc-res-names property. If not specified, the highest
resolution will be used.
+ - atmel,atmel,adc-sleep-mode: Boolean to enable of sleep mode when no conversion
Optional trigger Nodes:
- Required properties:
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index f175a86..c563488 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -52,6 +52,7 @@ struct at91_adc_state {
void __iomem *reg_base;
struct at91_adc_reg_desc *registers;
u8 startup_time;
+ bool sleep_mode;
struct iio_trigger **trig;
struct at91_adc_trigger *trigger_list;
u32 trigger_number;
@@ -455,6 +456,8 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
}
st->num_channels = prop;
+ st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode");
+
if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n");
ret = -EINVAL;
@@ -580,6 +583,7 @@ static int __devinit at91_adc_probe(struct platform_device *pdev)
struct iio_dev *idev;
struct at91_adc_state *st;
struct resource *res;
+ u32 reg;
idev = iio_device_alloc(sizeof(struct at91_adc_state));
if (idev == NULL) {
@@ -687,16 +691,13 @@ static int __devinit at91_adc_probe(struct platform_device *pdev)
*/
ticks = round_up((st->startup_time * adc_clk /
1000000) - 1, 8) / 8;
-
+ reg = AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL;
+ reg |= AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP;
if (st->low_res)
- at91_adc_writel(st, AT91_ADC_MR,
- AT91_ADC_LOWRES |
- (AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL) |
- (AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP));
- else
- at91_adc_writel(st, AT91_ADC_MR,
- (AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL) |
- (AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP));
+ reg |= AT91_ADC_LOWRES;
+ if (st->sleep_mode)
+ reg |= AT91_ADC_SLEEP;
+ at91_adc_writel(st, AT91_ADC_MR, reg);
/* Setup the ADC channels available on the board */
ret = at91_adc_channel_init(idev);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
