From f2f556001170e8698a1bbf0146ed2d11e75436b1 Mon Sep 17 00:00:00 2001
From: Denis Ciocca <denis.ciocca@xxxxxx>
Date: Mon, 22 Oct 2012 11:17:27 +0200
Subject: [PATCH] iio:accel: Add STMicroelectronics accelerometers driver
This patch adds generic accelerometer driver for STMicroelectronics
accelerometers, currently it supports:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, LSM303D,
LSM9DS0, LIS331DLH, LSM303DL, LSM303DLM, LSM330
Signed-off-by: Denis Ciocca <denis.ciocca@xxxxxx>
---
drivers/iio/accel/Kconfig | 37 +
drivers/iio/accel/Makefile | 6 +
drivers/iio/accel/st_accel_buffer.c | 103 ++
drivers/iio/accel/st_accel_core.c | 1301
++++++++++++++++++++++++++
drivers/iio/accel/st_accel_i2c.c | 139 +++
drivers/iio/accel/st_accel_spi.c | 199 ++++
drivers/iio/accel/st_accel_trigger.c | 84 ++
include/linux/iio/accel/st_accel.h | 119 +++
include/linux/platform_data/st_accel_pdata.h | 27 +
9 files changed, 2015 insertions(+), 0 deletions(-)
create mode 100644 drivers/iio/accel/st_accel_buffer.c
create mode 100644 drivers/iio/accel/st_accel_core.c
create mode 100644 drivers/iio/accel/st_accel_i2c.c
create mode 100644 drivers/iio/accel/st_accel_spi.c
create mode 100644 drivers/iio/accel/st_accel_trigger.c
create mode 100644 include/linux/iio/accel/st_accel.h
create mode 100644 include/linux/platform_data/st_accel_pdata.h
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index b2510c4..d65e66a 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -13,4 +13,41 @@ config HID_SENSOR_ACCEL_3D
Say yes here to build support for the HID SENSOR
accelerometers 3D.
+config ST_ACCEL_3AXIS
+ tristate "STMicroelectronics accelerometers 3-Axis Driver"
+ depends on (I2C || SPI) && SYSFS
+ help
+ Say yes here to build support for STMicroelectronics accelerometers:
+ LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, LSM303D,
+ LSM9DS0, LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+
+ This driver can also be built as a module. If so, the module
+ will be called st_accel.
+
+config ST_ACCEL_3AXIS_I2C
+ tristate "support I2C bus connection"
+ depends on ST_ACCEL_3AXIS && I2C
+ help
+ Say yes here to build I2C support for STMicroelectronics accelerometers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_accel_i2c.
+
+config ST_ACCEL_3AXIS_SPI
+ tristate "support SPI bus connection"
+ depends on ST_ACCEL_3AXIS && SPI_MASTER
+ help
+ Say yes here to build SPI support for STMicroelectronics accelerometers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_accel_spi.
+
+config ST_ACCEL_3AXIS_TRIGGERED_BUFFER
+ tristate "support triggered buffer"
+ depends on ST_ACCEL_3AXIS
+ select IIO_TRIGGERED_BUFFER
+ select IIO_BUFFER
+ help
+ Default trigger and buffer for STMicroelectronics accelerometers driver.
+
endmenu
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 5bc6855..1541236 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -3,3 +3,9 @@
#
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+
+st_accel-y := st_accel_core.o
+obj-$(CONFIG_ST_ACCEL_3AXIS_I2C) += st_accel_i2c.o
+obj-$(CONFIG_ST_ACCEL_3AXIS_SPI) += st_accel_spi.o
+obj-$(CONFIG_ST_ACCEL_3AXIS_TRIGGERED_BUFFER) += st_accel_trigger.o
st_accel_buffer.o
+obj-$(CONFIG_ST_ACCEL_3AXIS) += st_accel.o
diff --git a/drivers/iio/accel/st_accel_buffer.c
b/drivers/iio/accel/st_accel_buffer.c
new file mode 100644
index 0000000..e6e4b0d
--- /dev/null
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -0,0 +1,103 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@xxxxxx>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/byteorder/generic.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+
+
+#define ST_ACCEL_NUMBER_DATA_CHANNELS 3
+
+static int st_accel_read_all(struct iio_dev *indio_dev, u8 *rx_array)
+{
+ int len;
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ len = adata->read_multiple_byte(adata,
+ indio_dev->channels[ST_ACCEL_SCAN_X].address,
+ ST_ACCEL_BYTE_FOR_CHANNEL*ST_ACCEL_NUMBER_DATA_CHANNELS,
+ rx_array);
+ if (len < 0)
+ goto read_error;
+
+ return len;
+
+read_error:
+ return -EIO;
+}
+
+static int st_accel_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
+{
+ int ret, i, n = 0;
+ u8 rx_array[ST_ACCEL_BYTE_FOR_CHANNEL*ST_ACCEL_NUMBER_DATA_CHANNELS];
+ s16 *data = (s16 *)buf;
+
+ ret = st_accel_read_all(indio_dev, rx_array);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ST_ACCEL_NUMBER_DATA_CHANNELS; i++) {
+ if (test_bit(i, indio_dev->active_scan_mask)) {
+ data[n] = (s16)(((s16)(rx_array[2*i+1]) << 8)
+ | rx_array[2*i]);
+ n++;
+ }
+ }
+
+ return n*sizeof(data[0]);
+}
+
+static irqreturn_t st_accel_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ int len = 0;
+ char *data;
+
+ data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (data == NULL)
+ goto done;
+ if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
+ len = st_accel_get_buffer_element(indio_dev, data);
+ else
+ goto done;
+ if (indio_dev->scan_timestamp)
+ *(s64 *)((u8 *)data + ALIGN(len, sizeof(s64))) = pf->timestamp;
+ iio_push_to_buffer(indio_dev->buffer, data);
+ kfree(data);
+
+done:
+ iio_trigger_notify_done(indio_dev->trig);
+ return IRQ_HANDLED;
+}
+
+int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ indio_dev->scan_timestamp = true;
+ return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &st_accel_trigger_handler, NULL);
+}
+EXPORT_SYMBOL(st_accel_allocate_ring);
+
+void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+ iio_triggered_buffer_cleanup(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_deallocate_ring);
diff --git a/drivers/iio/accel/st_accel_core.c
b/drivers/iio/accel/st_accel_core.c
new file mode 100644
index 0000000..6295970
--- /dev/null
+++ b/drivers/iio/accel/st_accel_core.c
@@ -0,0 +1,1301 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@xxxxxx>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/accel/st_accel.h>
+#include <linux/platform_data/st_accel_pdata.h>
+
+
+#define UG_TO_MS2(x) (x*9800)
+#define ST_ACCEL_FULLSCALE_AVL_MAX 5
+#define ST_ACCEL_ODR_LIST_MAX 10
+#define ST_ACCEL_ON 1
+#define ST_ACCEL_OFF 0
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_ACCEL_DEFAULT_OUT_X_L_ADDR 0x28
+#define ST_ACCEL_DEFAULT_OUT_X_H_ADDR 0x29
+#define ST_ACCEL_DEFAULT_OUT_Y_L_ADDR 0x2a
+#define ST_ACCEL_DEFAULT_OUT_Y_H_ADDR 0x2b
+#define ST_ACCEL_DEFAULT_OUT_Z_L_ADDR 0x2c
+#define ST_ACCEL_DEFAULT_OUT_Z_H_ADDR 0x2d
+#define ST_ACCEL_DEFAULT_WAI_ADDRESS 0x0f
+#define ST_ACCEL_DEFAULT_POWER_ON_VALUE 0x01
+#define ST_ACCEL_DEFAULT_POWER_OFF_VALUE 0x00
+#define ST_ACCEL_DEFAULT_12_REALBITS 12
+#define ST_ACCEL_DEFAULT_16_REALBITS 16
+
+/* ODR */
+#define ST_ACCEL_ODR_AVL_1HZ 1
+#define ST_ACCEL_ODR_AVL_3HZ 3
+#define ST_ACCEL_ODR_AVL_6HZ 6
+#define ST_ACCEL_ODR_AVL_10HZ 10
+#define ST_ACCEL_ODR_AVL_12HZ 12
+#define ST_ACCEL_ODR_AVL_25HZ 25
+#define ST_ACCEL_ODR_AVL_50HZ 50
+#define ST_ACCEL_ODR_AVL_100HZ 100
+#define ST_ACCEL_ODR_AVL_200HZ 200
+#define ST_ACCEL_ODR_AVL_400HZ 400
+#define ST_ACCEL_ODR_AVL_800HZ 800
+#define ST_ACCEL_ODR_AVL_1000HZ 1000
+#define ST_ACCEL_ODR_AVL_1600HZ 1600
+
+/* FULLSCALE */
+#define ST_ACCEL_FS_AVL_2G 2
+#define ST_ACCEL_FS_AVL_4G 4
+#define ST_ACCEL_FS_AVL_6G 6
+#define ST_ACCEL_FS_AVL_8G 8
+#define ST_ACCEL_FS_AVL_16G 16
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_ACCEL_1_WAI_EXP 0x33
+#define ST_ACCEL_1_ODR_ADDR 0x20
+#define ST_ACCEL_1_ODR_MASK 0xf0
+#define ST_ACCEL_1_ODR_N_BIT 4
+#define ST_ACCEL_1_ODR_AVL_1HZ_VAL 0x01
+#define ST_ACCEL_1_ODR_AVL_10HZ_VAL 0x02
+#define ST_ACCEL_1_ODR_AVL_25HZ_VAL 0x03
+#define ST_ACCEL_1_ODR_AVL_50HZ_VAL 0x04
+#define ST_ACCEL_1_ODR_AVL_100HZ_VAL 0x05
+#define ST_ACCEL_1_ODR_AVL_200HZ_VAL 0x06
+#define ST_ACCEL_1_ODR_AVL_400HZ_VAL 0x07
+#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL 0x08
+#define ST_ACCEL_1_FS_N_BIT 2
+#define ST_ACCEL_1_FS_ADDR 0x23
+#define ST_ACCEL_1_FS_MASK 0x30
+#define ST_ACCEL_1_FS_AVL_2_VAL 0x00
+#define ST_ACCEL_1_FS_AVL_4_VAL 0x01
+#define ST_ACCEL_1_FS_AVL_8_VAL 0x02
+#define ST_ACCEL_1_FS_AVL_16_VAL 0x03
+#define ST_ACCEL_1_FS_AVL_2_GAIN 1000
+#define ST_ACCEL_1_FS_AVL_4_GAIN 2000
+#define ST_ACCEL_1_FS_AVL_8_GAIN 4000
+#define ST_ACCEL_1_FS_AVL_16_GAIN 12000
+#define ST_ACCEL_1_BDU_ADDR 0x23
+#define ST_ACCEL_1_BDU_MASK 0x80
+#define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_1_DRDY_IRQ_MASK 0x10
+#define ST_ACCEL_1_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_ACCEL_2_WAI_EXP 0x49
+#define ST_ACCEL_2_ODR_ADDR 0x20
+#define ST_ACCEL_2_ODR_MASK 0xf0
+#define ST_ACCEL_2_ODR_N_BIT 4
+#define ST_ACCEL_2_ODR_AVL_3HZ_VAL 0x01
+#define ST_ACCEL_2_ODR_AVL_6HZ_VAL 0x02
+#define ST_ACCEL_2_ODR_AVL_12HZ_VAL 0x03
+#define ST_ACCEL_2_ODR_AVL_25HZ_VAL 0x04
+#define ST_ACCEL_2_ODR_AVL_50HZ_VAL 0x05
+#define ST_ACCEL_2_ODR_AVL_100HZ_VAL 0x06
+#define ST_ACCEL_2_ODR_AVL_200HZ_VAL 0x07
+#define ST_ACCEL_2_ODR_AVL_400HZ_VAL 0x08
+#define ST_ACCEL_2_ODR_AVL_800HZ_VAL 0x09
+#define ST_ACCEL_2_ODR_AVL_1600HZ_VAL 0x0a
+#define ST_ACCEL_2_FS_N_BIT 3
+#define ST_ACCEL_2_FS_ADDR 0x21
+#define ST_ACCEL_2_FS_MASK 0x38
+#define ST_ACCEL_2_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_2_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_2_FS_AVL_6_VAL 0x02
+#define ST_ACCEL_2_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_2_FS_AVL_16_VAL 0x04
+#define ST_ACCEL_2_FS_AVL_2_GAIN 61
+#define ST_ACCEL_2_FS_AVL_4_GAIN 122
+#define ST_ACCEL_2_FS_AVL_6_GAIN 183
+#define ST_ACCEL_2_FS_AVL_8_GAIN 244
+#define ST_ACCEL_2_FS_AVL_16_GAIN 732
+#define ST_ACCEL_2_BDU_ADDR 0x20
+#define ST_ACCEL_2_BDU_MASK 0x08
+#define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_2_DRDY_IRQ_MASK 0x04
+#define ST_ACCEL_2_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 3 */
+#define ST_ACCEL_3_WAI_EXP 0x32
+#define ST_ACCEL_3_ODR_ADDR 0x20
+#define ST_ACCEL_3_ODR_MASK 0x18
+#define ST_ACCEL_3_ODR_N_BIT 2
+#define ST_ACCEL_3_ODR_AVL_50HZ_VAL 0x00
+#define ST_ACCEL_3_ODR_AVL_100HZ_VAL 0x01
+#define ST_ACCEL_3_ODR_AVL_400HZ_VAL 0x02
+#define ST_ACCEL_3_ODR_AVL_1000HZ_VAL 0x03
+#define ST_ACCEL_3_PW_ADDR 0x20
+#define ST_ACCEL_3_PW_MASK 0xe0
+#define ST_ACCEL_3_PW_N_BIT 3
+#define ST_ACCEL_3_PW_VALUE_ON 0x01
+#define ST_ACCEL_3_PW_VALUE_OFF 0x00
+#define ST_ACCEL_3_FS_N_BIT 2
+#define ST_ACCEL_3_FS_ADDR 0x23
+#define ST_ACCEL_3_FS_MASK 0x30
+#define ST_ACCEL_3_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_3_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_3_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_3_FS_AVL_2_GAIN 1000
+#define ST_ACCEL_3_FS_AVL_4_GAIN 2000
+#define ST_ACCEL_3_FS_AVL_8_GAIN 3900
+#define ST_ACCEL_3_BDU_ADDR 0x23
+#define ST_ACCEL_3_BDU_MASK 0x80
+#define ST_ACCEL_3_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_3_DRDY_IRQ_MASK 0x02
+#define ST_ACCEL_3_MULTIREAD_BIT true
+
+/* CUSTOM VALUES FOR SENSOR 4 */
+#define ST_ACCEL_4_WAI_EXP 0x40
+#define ST_ACCEL_4_ODR_ADDR 0x20
+#define ST_ACCEL_4_ODR_MASK 0xf0
+#define ST_ACCEL_4_ODR_N_BIT 4
+#define ST_ACCEL_4_ODR_AVL_3HZ_VAL 0x01
+#define ST_ACCEL_4_ODR_AVL_6HZ_VAL 0x02
+#define ST_ACCEL_4_ODR_AVL_12HZ_VAL 0x03
+#define ST_ACCEL_4_ODR_AVL_25HZ_VAL 0x04
+#define ST_ACCEL_4_ODR_AVL_50HZ_VAL 0x05
+#define ST_ACCEL_4_ODR_AVL_100HZ_VAL 0x06
+#define ST_ACCEL_4_ODR_AVL_200HZ_VAL 0x07
+#define ST_ACCEL_4_ODR_AVL_400HZ_VAL 0x08
+#define ST_ACCEL_4_ODR_AVL_800HZ_VAL 0x09
+#define ST_ACCEL_4_ODR_AVL_1600HZ_VAL 0x0a
+#define ST_ACCEL_4_FS_N_BIT 3
+#define ST_ACCEL_4_FS_ADDR 0x24
+#define ST_ACCEL_4_FS_MASK 0x38
+#define ST_ACCEL_4_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_4_FS_AVL_4_VAL 0X01
+#define ST_ACCEL_4_FS_AVL_6_VAL 0x02
+#define ST_ACCEL_4_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_4_FS_AVL_16_VAL 0x04
+#define ST_ACCEL_4_FS_AVL_2_GAIN 61
+#define ST_ACCEL_4_FS_AVL_4_GAIN 122
+#define ST_ACCEL_4_FS_AVL_6_GAIN 183
+#define ST_ACCEL_4_FS_AVL_8_GAIN 244
+#define ST_ACCEL_4_FS_AVL_16_GAIN 732
+#define ST_ACCEL_4_BDU_ADDR 0x20
+#define ST_ACCEL_4_BDU_MASK 0x08
+#define ST_ACCEL_4_DRDY_IRQ_ADDR 0x23
+#define ST_ACCEL_4_DRDY_IRQ_MASK 0x80
+#define ST_ACCEL_4_IG1_EN_ADDR 0x23
+#define ST_ACCEL_4_IG1_EN_MASK 0x08
+#define ST_ACCEL_4_MULTIREAD_BIT false
+
+struct st_accel_odr_available {
+ unsigned int hz;
+ u8 value;
+};
+
+struct st_accel_odr {
+ u8 addr;
+ u8 mask;
+ short num_bit;
+ struct st_accel_odr_available odr_avl[ST_ACCEL_ODR_LIST_MAX];
+};
+
+struct st_accel_power {
+ u8 addr;
+ u8 mask;
+ unsigned short num_bit;
+ u8 value_off;
+ u8 value_on;
+};
+
+struct st_accel_fullscale_available {
+ unsigned int num;
+ u8 value;
+ unsigned int gain;
+};
+
+struct st_accel_fullscale {
+ u8 addr;
+ u8 mask;
+ unsigned short num_bit;
+ struct st_accel_fullscale_available fs_avl[ST_ACCEL_FULLSCALE_AVL_MAX];
+};
+
+struct st_accel_bdu {
+ u8 addr;
+ u8 mask;
+};
+
+struct st_accel_interrupt_generator {
+ u8 en_addr;
+ u8 latch_mask_addr;
+ u8 en_mask;
+ u8 latching_mask;
+};
+
+struct st_accel_data_ready_irq {
+ u8 addr;
+ u8 mask;
+ struct st_accel_interrupt_generator ig1;
+};
+
+#define ST_ACCEL_LSM_CHANNELS(index, mod, endian, bits, addr) \
+{ \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
+ .scan_index = index, \
+ .channel2 = mod, \
+ .address = addr, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = bits, \
+ .shift = 16 - bits, \
+ .storagebits = 16, \
+ .endianness = endian, \
+ }, \
+}
+
+static const struct iio_chan_spec st_accel_12bit_channels[] = {
+ ST_ACCEL_LSM_CHANNELS(ST_ACCEL_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_ACCEL_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_ACCEL_LSM_CHANNELS(ST_ACCEL_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_ACCEL_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_ACCEL_LSM_CHANNELS(ST_ACCEL_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_ACCEL_DEFAULT_12_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_accel_16bit_channels[] = {
+ ST_ACCEL_LSM_CHANNELS(ST_ACCEL_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_ACCEL_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_X_L_ADDR),
+ ST_ACCEL_LSM_CHANNELS(ST_ACCEL_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_ACCEL_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Y_L_ADDR),
+ ST_ACCEL_LSM_CHANNELS(ST_ACCEL_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_ACCEL_DEFAULT_16_REALBITS, ST_ACCEL_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_accel_platform_data st_accel_default_pdata = {
+ .fullscale = ST_ACCEL_FS_AVL_2G,
+ .sampling_frequency = ST_ACCEL_ODR_AVL_100HZ,
+};
+
+/**
+ * struct st_accel_sensors - ST accel sensors list
+ * @wai: Contents of WhoAmI register.
+ * @ch: IIO channels for the sensor.
+ * @odr: Output data rate register and odr list available.
+ * @pw: Power register of the sensor.
+ * @fs: Full scale register and fs list available.
+ * @bdu: Block data update register.
+ * @drdy_irq: Data ready register of the sensor.
+ * @ multi_read_bit: Use or not particular bit for [I2C/SPI] multiread.
+ *
+ */
+
+static const struct st_accel_sensors {
+ u8 wai;
+ struct iio_chan_spec *ch;
+ struct st_accel_odr odr;
+ struct st_accel_power pw;
+ struct st_accel_fullscale fs;
+ struct st_accel_bdu bdu;
+ struct st_accel_data_ready_irq drdy_irq;
+ bool multi_read_bit;
+} st_accel_sensors[] = {
+ {
+ .wai = ST_ACCEL_1_WAI_EXP,
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .num_bit = ST_ACCEL_1_ODR_N_BIT,
+ .odr_avl = {
+ [0] = {
+ .hz = ST_ACCEL_ODR_AVL_1HZ,
+ .value = ST_ACCEL_1_ODR_AVL_1HZ_VAL,
+ },
+ [1] = {
+ .hz = ST_ACCEL_ODR_AVL_10HZ,
+ .value = ST_ACCEL_1_ODR_AVL_10HZ_VAL,
+ },
+ [2] = {
+ .hz = ST_ACCEL_ODR_AVL_25HZ,
+ .value = ST_ACCEL_1_ODR_AVL_25HZ_VAL,
+ },
+ [3] = {
+ .hz = ST_ACCEL_ODR_AVL_50HZ,
+ .value = ST_ACCEL_1_ODR_AVL_50HZ_VAL,
+ },
+ [4] = {
+ .hz = ST_ACCEL_ODR_AVL_100HZ,
+ .value = ST_ACCEL_1_ODR_AVL_100HZ_VAL,
+ },
+ [5] = {
+ .hz = ST_ACCEL_ODR_AVL_200HZ,
+ .value = ST_ACCEL_1_ODR_AVL_200HZ_VAL,
+ },
+ [6] = {
+ .hz = ST_ACCEL_ODR_AVL_400HZ,
+ .value = ST_ACCEL_1_ODR_AVL_400HZ_VAL,
+ },
+ [7] = {
+ .hz = ST_ACCEL_ODR_AVL_1600HZ,
+ .value = ST_ACCEL_1_ODR_AVL_1600HZ_VAL,
+ },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .num_bit = ST_ACCEL_1_ODR_N_BIT,
+ .value_off = ST_ACCEL_DEFAULT_POWER_OFF_VALUE,
+ },
+ .fs = {
+ .addr = ST_ACCEL_1_FS_ADDR,
+ .mask = ST_ACCEL_1_FS_MASK,
+ .num_bit = ST_ACCEL_1_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_1_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_1_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_1_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_8_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_1_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_1_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_1_BDU_ADDR,
+ .mask = ST_ACCEL_1_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_1_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+ },
+ {
+ .wai = ST_ACCEL_2_WAI_EXP,
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_2_ODR_ADDR,
+ .mask = ST_ACCEL_2_ODR_MASK,
+ .num_bit = ST_ACCEL_2_ODR_N_BIT,
+ .odr_avl = {
+ [0] = {
+ .hz = ST_ACCEL_ODR_AVL_3HZ,
+ .value = ST_ACCEL_2_ODR_AVL_3HZ_VAL,
+ },
+ [1] = {
+ .hz = ST_ACCEL_ODR_AVL_6HZ,
+ .value = ST_ACCEL_2_ODR_AVL_6HZ_VAL,
+ },
+ [2] = {
+ .hz = ST_ACCEL_ODR_AVL_12HZ,
+ .value = ST_ACCEL_2_ODR_AVL_12HZ_VAL,
+ },
+ [3] = {
+ .hz = ST_ACCEL_ODR_AVL_25HZ,
+ .value = ST_ACCEL_2_ODR_AVL_25HZ_VAL,
+ },
+ [4] = {
+ .hz = ST_ACCEL_ODR_AVL_50HZ,
+ .value = ST_ACCEL_2_ODR_AVL_50HZ_VAL,
+ },
+ [5] = {
+ .hz = ST_ACCEL_ODR_AVL_100HZ,
+ .value = ST_ACCEL_2_ODR_AVL_100HZ_VAL,
+ },
+ [6] = {
+ .hz = ST_ACCEL_ODR_AVL_200HZ,
+ .value = ST_ACCEL_2_ODR_AVL_200HZ_VAL,
+ },
+ [7] = {
+ .hz = ST_ACCEL_ODR_AVL_400HZ,
+ .value = ST_ACCEL_2_ODR_AVL_400HZ_VAL,
+ },
+ [8] = {
+ .hz = ST_ACCEL_ODR_AVL_800HZ,
+ .value = ST_ACCEL_2_ODR_AVL_800HZ_VAL,
+ },
+ [9] = {
+ .hz = ST_ACCEL_ODR_AVL_1600HZ,
+ .value = ST_ACCEL_2_ODR_AVL_1600HZ_VAL,
+ },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_2_ODR_ADDR,
+ .mask = ST_ACCEL_2_ODR_MASK,
+ .num_bit = ST_ACCEL_2_ODR_N_BIT,
+ .value_off = ST_ACCEL_DEFAULT_POWER_OFF_VALUE,
+ },
+ .fs = {
+ .addr = ST_ACCEL_2_FS_ADDR,
+ .mask = ST_ACCEL_2_FS_MASK,
+ .num_bit = ST_ACCEL_2_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_2_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_2_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_6G,
+ .value = ST_ACCEL_2_FS_AVL_6_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_6_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_2_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_8_GAIN,
+ },
+ [4] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_2_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_2_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_2_DRDY_IRQ_MASK,
+ },
+ .bdu = {
+ .addr = ST_ACCEL_2_BDU_ADDR,
+ .mask = ST_ACCEL_2_BDU_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
+ },
+ {
+ .wai = ST_ACCEL_3_WAI_EXP,
+ .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_3_ODR_ADDR,
+ .mask = ST_ACCEL_3_ODR_MASK,
+ .num_bit = ST_ACCEL_3_ODR_N_BIT,
+ .odr_avl = {
+ [0] = {
+ .hz = ST_ACCEL_ODR_AVL_50HZ,
+ .value = ST_ACCEL_3_ODR_AVL_50HZ_VAL,
+ },
+ [1] = {
+ .hz = ST_ACCEL_ODR_AVL_100HZ,
+ .value = ST_ACCEL_3_ODR_AVL_100HZ_VAL,
+ },
+ [2] = {
+ .hz = ST_ACCEL_ODR_AVL_400HZ,
+ .value = ST_ACCEL_3_ODR_AVL_400HZ_VAL,
+ },
+ [3] = {
+ .hz = ST_ACCEL_ODR_AVL_1000HZ,
+ .value = ST_ACCEL_3_ODR_AVL_1000HZ_VAL,
+ },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_3_PW_ADDR,
+ .mask = ST_ACCEL_3_PW_MASK,
+ .num_bit = ST_ACCEL_3_PW_N_BIT,
+ .value_on = ST_ACCEL_3_PW_VALUE_ON,
+ .value_off = ST_ACCEL_3_PW_VALUE_OFF,
+ },
+ .fs = {
+ .addr = ST_ACCEL_3_FS_ADDR,
+ .mask = ST_ACCEL_3_FS_MASK,
+ .num_bit = ST_ACCEL_3_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_3_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_3_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_3_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_3_FS_AVL_8_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_3_BDU_ADDR,
+ .mask = ST_ACCEL_3_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_3_DRDY_IRQ_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
+ },
+ {
+ .wai = ST_ACCEL_4_WAI_EXP,
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_4_ODR_ADDR,
+ .mask = ST_ACCEL_4_ODR_MASK,
+ .num_bit = ST_ACCEL_4_ODR_N_BIT,
+ .odr_avl = {
+ [0] = {
+ .hz = ST_ACCEL_ODR_AVL_3HZ,
+ .value = ST_ACCEL_4_ODR_AVL_3HZ_VAL,
+ },
+ [1] = {
+ .hz = ST_ACCEL_ODR_AVL_6HZ,
+ .value = ST_ACCEL_4_ODR_AVL_6HZ_VAL,
+ },
+ [2] = {
+ .hz = ST_ACCEL_ODR_AVL_12HZ,
+ .value = ST_ACCEL_4_ODR_AVL_12HZ_VAL,
+ },
+ [3] = {
+ .hz = ST_ACCEL_ODR_AVL_25HZ,
+ .value = ST_ACCEL_4_ODR_AVL_25HZ_VAL,
+ },
+ [4] = {
+ .hz = ST_ACCEL_ODR_AVL_50HZ,
+ .value = ST_ACCEL_4_ODR_AVL_50HZ_VAL,
+ },
+ [5] = {
+ .hz = ST_ACCEL_ODR_AVL_100HZ,
+ .value = ST_ACCEL_4_ODR_AVL_100HZ_VAL,
+ },
+ [6] = {
+ .hz = ST_ACCEL_ODR_AVL_200HZ,
+ .value = ST_ACCEL_4_ODR_AVL_200HZ_VAL,
+ },
+ [7] = {
+ .hz = ST_ACCEL_ODR_AVL_400HZ,
+ .value = ST_ACCEL_4_ODR_AVL_400HZ_VAL,
+ },
+ [8] = {
+ .hz = ST_ACCEL_ODR_AVL_800HZ,
+ .value = ST_ACCEL_4_ODR_AVL_800HZ_VAL,
+ },
+ [9] = {
+ .hz = ST_ACCEL_ODR_AVL_1600HZ,
+ .value = ST_ACCEL_4_ODR_AVL_1600HZ_VAL,
+ },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_4_ODR_ADDR,
+ .mask = ST_ACCEL_4_ODR_MASK,
+ .num_bit = ST_ACCEL_4_ODR_N_BIT,
+ .value_off = ST_ACCEL_DEFAULT_POWER_OFF_VALUE,
+ },
+ .fs = {
+ .addr = ST_ACCEL_4_FS_ADDR,
+ .mask = ST_ACCEL_4_FS_MASK,
+ .num_bit = ST_ACCEL_4_FS_N_BIT,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_4_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_4_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_4_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_4_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_6G,
+ .value = ST_ACCEL_4_FS_AVL_6_VAL,
+ .gain = ST_ACCEL_4_FS_AVL_6_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_4_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_4_FS_AVL_8_GAIN,
+ },
+ [4] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_4_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_4_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_4_BDU_ADDR,
+ .mask = ST_ACCEL_4_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_4_DRDY_IRQ_ADDR,
+ .mask = ST_ACCEL_4_DRDY_IRQ_MASK,
+ .ig1 = {
+ .en_addr = ST_ACCEL_4_IG1_EN_ADDR,
+ .en_mask = ST_ACCEL_4_IG1_EN_MASK,
+ },
+ },
+ .multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT,
+ },
+};
+
+static int st_accel_write_data_with_mask(struct iio_dev *indio_dev, u8
reg_addr,
+ u8 mask, short num_bit, u8 data)
+{
+ int err, j, pos;
+ u8 prev_data;
+ u8 new_data;
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ pos = 8 - num_bit;
+ for (j = 128; j >= 0; j = j/2) {
+ if (mask / j > 0)
+ break;
+ else
+ pos--;
+ }
+
+ err = adata->read_byte(adata, reg_addr, &prev_data);
+ if (err < 0)
+ goto st_accel_write_data_with_mask_error;
+
+ new_data = ((prev_data & (~mask)) | ((data << pos) & mask));
+ err = adata->write_byte(adata, reg_addr, new_data);
+
+st_accel_write_data_with_mask_error:
+ return err;
+}
+
+static int st_accel_match_odr(const struct st_accel_sensors *sensor,
+ unsigned int odr, struct st_accel_odr_available *odr_out)
+{
+ int i, ret = -1;
+
+ for (i = 0; i < ARRAY_SIZE(sensor->odr.odr_avl); i++) {
+ if (sensor->odr.odr_avl[i].hz == odr) {
+ odr_out->hz = sensor->odr.odr_avl[i].hz;
+ odr_out->value = sensor->odr.odr_avl[i].value;
+ ret = 0;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int st_accel_match_fs(const struct st_accel_sensors *sensor,
+ unsigned int fs, struct st_accel_fullscale_available *fs_out)
+{
+ int i, ret = -1;
+
+ for (i = 0; i < ARRAY_SIZE(sensor->fs.fs_avl); i++) {
+ if (sensor->fs.fs_avl[i].num == fs) {
+ fs_out->num = sensor->fs.fs_avl[i].num;
+ fs_out->gain = sensor->fs.fs_avl[i].gain;
+ fs_out->value = sensor->fs.fs_avl[i].value;
+ ret = 0;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
+{
+ int err;
+ struct st_accel_data *adata;
+
+ adata = iio_priv(indio_dev);
+ if (st_accel_sensors[adata->index].drdy_irq.ig1.en_addr > 0) {
+ err = st_accel_write_data_with_mask(indio_dev,
+ st_accel_sensors[adata->index].drdy_irq.ig1.en_addr,
+ st_accel_sensors[adata->index].drdy_irq.ig1.en_mask, 1,
+ (int)enable);
+ if (err < 0)
+ goto st_accel_set_dataready_irq_error;
+ }
+
+ if (st_accel_sensors[adata->index].drdy_irq.ig1.latch_mask_addr > 0) {
+ err = st_accel_write_data_with_mask(indio_dev,
+ st_accel_sensors[adata->index].drdy_irq.ig1.latch_mask_addr,
+ st_accel_sensors[adata->index].drdy_irq.ig1.latching_mask, 1,
+ (int)enable);
+ if (err < 0)
+ goto st_accel_set_dataready_irq_error;
+ }
+
+ err = st_accel_write_data_with_mask(indio_dev,
+ st_accel_sensors[adata->index].drdy_irq.addr,
+ st_accel_sensors[adata->index].drdy_irq.mask, 1, (int)enable);
+ if (err < 0)
+ goto st_accel_set_dataready_irq_error;
+
+st_accel_set_dataready_irq_error:
+ return err;
+}
+EXPORT_SYMBOL(st_accel_set_dataready_irq);
+
+static int st_accel_set_bdu(struct iio_dev *indio_dev,
+ const struct st_accel_bdu *bdu, u8 value)
+{
+ return st_accel_write_data_with_mask(indio_dev, bdu->addr, bdu->mask,
+ 1, value);
+}
+
+static int st_accel_set_odr(struct iio_dev *indio_dev,
+ struct st_accel_odr_available *odr_available)
+{
+ int err;
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ if ((st_accel_sensors[adata->index].odr.addr ==
+ st_accel_sensors[adata->index].pw.addr) &&
+ (st_accel_sensors[adata->index].odr.mask ==
+ st_accel_sensors[adata->index].pw.mask)) {
+ if (adata->enabled == (bool)ST_ACCEL_ON) {
+ err = st_accel_write_data_with_mask(indio_dev,
+ st_accel_sensors[adata->index].odr.addr,
+ st_accel_sensors[adata->index].odr.mask,
+ st_accel_sensors[adata->index].odr.num_bit,
+ odr_available->value);
+ if (err < 0)
+ goto sc_accel_set_odr_error;
+ } else {
+ adata->odr = odr_available->hz;
+ err = 0;
+ }
+ } else {
+ err = st_accel_write_data_with_mask(indio_dev,
+ st_accel_sensors[adata->index].odr.addr,
+ st_accel_sensors[adata->index].odr.mask,
+ st_accel_sensors[adata->index].odr.num_bit,
+ odr_available->value);
+ if (err < 0)
+ goto sc_accel_set_odr_error;
+ }
+
+sc_accel_set_odr_error:
+ return err;
+}
+
+static int st_accel_set_enable(struct iio_dev *indio_dev, int enable)
+{
+ int err;
+ bool found;
+ u8 tmp_value;
+ struct st_accel_odr_available odr_out;
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ switch (enable) {
+ case ST_ACCEL_ON:
+ found = false;
+ tmp_value = st_accel_sensors[adata->index].pw.value_on;
+ if ((st_accel_sensors[adata->index].odr.addr ==
+ st_accel_sensors[adata->index].pw.addr) &&
+ (st_accel_sensors[adata->index].odr.mask ==
+ st_accel_sensors[adata->index].pw.mask)) {
+ err = st_accel_match_odr(
+ &st_accel_sensors[adata->index], adata->odr,
+ &odr_out);
+ if (err < 0)
+ goto set_enable_error;
+ tmp_value = odr_out.value;
+ found = true;
+ }
+ err = st_accel_write_data_with_mask(indio_dev,
+ st_accel_sensors[adata->index].pw.addr,
+ st_accel_sensors[adata->index].pw.mask,
+ st_accel_sensors[adata->index].pw.num_bit,
+ tmp_value);
+ if (err < 0)
+ goto set_enable_error;
+ adata->enabled = (bool)ST_ACCEL_ON;
+ if (found)
+ adata->odr = odr_out.hz;
+ break;
+ case ST_ACCEL_OFF:
+ err = st_accel_write_data_with_mask(indio_dev,
+ st_accel_sensors[adata->index].pw.addr,
+ st_accel_sensors[adata->index].pw.mask,
+ st_accel_sensors[adata->index].pw.num_bit,
+ st_accel_sensors[adata->index].pw.value_off);
+ if (err < 0)
+ goto set_enable_error;
+ adata->enabled = (bool)ST_ACCEL_OFF;
+ break;
+ default:
+ err = -EINVAL;
+ goto set_enable_error;
+ }
+
+set_enable_error:
+ return err;
+}
+
+static int st_accel_set_fullscale(struct iio_dev *indio_dev,
+ struct st_accel_fullscale_available *fs_avl)
+{
+ int err;
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ err = st_accel_write_data_with_mask(indio_dev,
+ st_accel_sensors[adata->index].fs.addr,
+ st_accel_sensors[adata->index].fs.mask,
+ st_accel_sensors[adata->index].fs.num_bit,
+ fs_avl->value);
+ if (err < 0)
+ goto st_accel_set_fullscale_error;
+
+ adata->fullscale = fs_avl->num;
+ adata->gain = fs_avl->gain;
+ return err;
+
+st_accel_set_fullscale_error:
+ dev_err(&indio_dev->dev, "failed to set new fullscale.\n");
+ return err;
+}
+
+static int st_accel_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ int data_tmp;
+ u8 outdata[ST_ACCEL_BYTE_FOR_CHANNEL];
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
+ err = -EBUSY;
+ goto read_error;
+ } else {
+ if (!adata->enabled) {
+ err = -EIO;
+ goto read_error;
+ } else {
+ err = adata->read_multiple_byte(adata,
+ ch->address, ST_ACCEL_BYTE_FOR_CHANNEL,
+ outdata);
+ if (err < 0)
+ goto read_error;
+
+ *val = ((s16)(((s16)(outdata[1]) << 8)
+ | outdata[0])) >> ch->scan_type.shift;
+ }
+ }
+ mutex_unlock(&indio_dev->mlock);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ data_tmp = UG_TO_MS2(adata->gain);
+ *val = 0;
+ *val2 = data_tmp;
+ return IIO_VAL_INT_PLUS_NANO;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ mutex_unlock(&indio_dev->mlock);
+ return err;
+}
+
+static int st_accel_check_device_list(struct iio_dev *indio_dev, u8 wai)
+{
+ int i;
+ bool found;
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ found = false;
+ for (i = 0; i < ARRAY_SIZE(st_accel_sensors); i++) {
+ if (st_accel_sensors[i].wai == wai) {
+ found = true;
+ break;
+ }
+ }
+ if (!found)
+ goto check_device_error;
+
+ adata->index = i;
+
+ return i;
+
+check_device_error:
+ dev_err(&indio_dev->dev, "device not supported -> wai (0x%x).\n", wai);
+ return -ENODEV;
+}
+
+static int st_accel_get_wai_device(struct iio_dev *indio_dev, u8 reg_addr,
+ u8 *value)
+{
+ int ret;
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ ret = adata->read_byte(adata, reg_addr, value);
+ if (ret < 0)
+ goto read_byte_wai_error;
+
+ return 0;
+
+read_byte_wai_error:
+ dev_err(&indio_dev->dev,
+ "failed to read WhoAmI (register 0x%x).\n", reg_addr);
+ return -EIO;
+}
+
+static ssize_t st_accel_sysfs_set_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ int err;
+ unsigned int freq;
+ struct st_accel_odr_available odr_out;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ err = kstrtoint(buf, 10, &freq);
+ if (err < 0)
+ goto conversion_error;
+
+ mutex_lock(&indio_dev->mlock);
+ err = st_accel_match_odr(&st_accel_sensors[adata->index],
+ freq, &odr_out);
+ if (err < 0)
+ goto st_accel_sysfs_set_sampling_frequency_error;
+
+ err = st_accel_set_odr(indio_dev, &odr_out);
+ if (err < 0) {
+ dev_err(&indio_dev->dev,
+ "failed to set sampling frequency to %d.\n", freq);
+ goto st_accel_sysfs_set_sampling_frequency_error;
+ }
+ adata->odr = odr_out.hz;
+
+st_accel_sysfs_set_sampling_frequency_error:
+ mutex_unlock(&indio_dev->mlock);
+conversion_error:
+ return size;
+}
+
+static ssize_t st_accel_sysfs_get_sampling_frequency(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n", adata->odr);
+}
+
+static ssize_t st_accel_sysfs_set_enable(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ int err;
+ bool en;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+
+ err = strtobool(buf, &en);
+ if (err < 0)
+ goto set_enable_error;
+
+ mutex_lock(&indio_dev->mlock);
+ err = st_accel_set_enable(indio_dev, (int)en);
+ if (err < 0)
+ dev_err(&indio_dev->dev,
+ "failed to set enable to %d.\n", (int)en);
+ mutex_unlock(&indio_dev->mlock);
+
+set_enable_error:
+ return size;
+}
+
+static ssize_t st_accel_sysfs_get_enable(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n", (int)adata->enabled);
+}
+
+static ssize_t st_accel_sysfs_get_fullscale(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n", adata->fullscale);
+}
+
+static ssize_t st_accel_sysfs_set_fullscale(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ int err;
+ unsigned int fs;
+ struct st_accel_fullscale_available fs_out;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ err = kstrtoint(buf, 10, &fs);
+ if (err < 0)
+ goto conversion_error;
+
+ mutex_lock(&indio_dev->mlock);
+ err = st_accel_match_fs(&st_accel_sensors[adata->index], fs, &fs_out);
+ if (err < 0)
+ goto match_fullscale_error;
+
+ err = st_accel_set_fullscale(indio_dev, &fs_out);
+ if (err < 0) {
+ dev_err(&indio_dev->dev,
+ "failed to set new fullscale. (errn %d).\n", err);
+ }
+
+match_fullscale_error:
+ mutex_unlock(&indio_dev->mlock);
+conversion_error:
+ return size;
+}
+
+static ssize_t st_accel_sysfs_fullscale_available(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int i, len = 0;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ mutex_lock(&indio_dev->mlock);
+ for (i = 0; i < ARRAY_SIZE(st_accel_sensors[adata->index].fs.fs_avl);
+ i++) {
+ if (st_accel_sensors[adata->index].fs.fs_avl[i].num == 0)
+ break;
+
+ len += sprintf(buf+len, "%d ",
+ st_accel_sensors[adata->index].fs.fs_avl[i].num);
+ }
+ mutex_unlock(&indio_dev->mlock);
+
+ len--;
+ len += sprintf(buf+len, "\n");
+ return len;
+}
+
+static ssize_t st_accel_sysfs_sampling_frequency_available(struct
device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int i, len = 0;
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ mutex_lock(&indio_dev->mlock);
+ for (i = 0; i < ARRAY_SIZE(st_accel_sensors[adata->index].odr.odr_avl);
+ i++) {
+ if (st_accel_sensors[adata->index].odr.odr_avl[i].hz == 0)
+ break;
+
+ len += sprintf(buf+len, "%d ",
+ st_accel_sensors[adata->index].odr.odr_avl[i].hz);
+ }
+ mutex_unlock(&indio_dev->mlock);
+
+ len--;
+ len += sprintf(buf+len, "\n");
+ return len;
+}
+
+/**
+ * IIO_DEVICE_ATTR - sampling_frequency_available
+ * @read: show all frequency available of the sensor.
+ *
+ */
+
+static IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO,
+ st_accel_sysfs_sampling_frequency_available, NULL , 0);
+
+/**
+ * IIO_DEVICE_ATTR - fullscale_available
+ * @read: show all fullscale available of the sensor.
+ *
+ */
+
+static IIO_DEVICE_ATTR(fullscale_available, S_IRUGO,
+ st_accel_sysfs_fullscale_available, NULL , 0);
+
+/**
+ * IIO_DEVICE_ATTR - fullscale
+ * @read: show the current fullscale of the sensor.
+ * @write: store the current fullscale of the sensor.
+ *
+ */
+
+static IIO_DEVICE_ATTR(fullscale, S_IWUSR | S_IRUGO,
+ st_accel_sysfs_get_fullscale, st_accel_sysfs_set_fullscale , 0);
+
+/**
+ * IIO_DEVICE_ATTR - enable
+ * @read: show the current status of the sensor.
+ * @write: power on/off the sensor.
+ *
+ */
+
+static IIO_DEVICE_ATTR(enable, S_IWUSR | S_IRUGO,
st_accel_sysfs_get_enable,
+ st_accel_sysfs_set_enable , 0);
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ st_accel_sysfs_get_sampling_frequency,
+ st_accel_sysfs_set_sampling_frequency);
+
+static struct attribute *st_accel_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_fullscale_available.dev_attr.attr,
+ &iio_dev_attr_fullscale.dev_attr.attr,
+ &iio_dev_attr_enable.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_accel_attribute_group = {
+ .attrs = st_accel_attributes,
+};
+
+static const struct iio_info acc_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_accel_attribute_group,
+ .read_raw = &st_accel_read_raw,
+};
+
+static int st_accel_init_sensor(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_accel_odr_available odr_out;
+ struct st_accel_fullscale_available fs_out;
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ err = st_accel_set_enable(indio_dev, ST_ACCEL_OFF);
+ if (err < 0)
+ goto init_error;
+
+ st_accel_match_fs(&st_accel_sensors[adata->index],
+ adata->fullscale, &fs_out);
+ err = st_accel_set_fullscale(indio_dev, &fs_out);
+ if (err < 0)
+ goto init_error;
+
+ st_accel_match_odr(&st_accel_sensors[adata->index],
+ adata->odr, &odr_out);
+ err = st_accel_set_odr(indio_dev, &odr_out);
+ if (err < 0)
+ goto init_error;
+
+ err = st_accel_set_bdu(indio_dev,
+ &st_accel_sensors[adata->index].bdu, (u8)ST_ACCEL_ON);
+ if (err < 0)
+ goto init_error;
+
+ return 0;
+
+init_error:
+ dev_err(&indio_dev->dev, "failed to init sensor data.");
+ return -EIO;
+}
+
+int st_accel_iio_probe(struct iio_dev *indio_dev)
+{
+ int err;
+ u8 wai;
+ struct st_accel_data *adata = iio_priv(indio_dev);
+ struct st_accel_platform_data *pdata;
+
+ mutex_init(&adata->slock);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &acc_info;
+
+ err = st_accel_get_wai_device(indio_dev,
+ ST_ACCEL_DEFAULT_WAI_ADDRESS, &wai);
+ if (err < 0)
+ goto st_accel_iio_probe_error;
+
+ err = st_accel_check_device_list(indio_dev, wai);
+ if (err < 0)
+ goto st_accel_iio_probe_error;
+
+ adata->multiread_bit = st_accel_sensors[adata->index].multi_read_bit;
+ indio_dev->channels = st_accel_sensors[adata->index].ch;
+ indio_dev->num_channels = ST_ACCEL_NUMBER_ALL_CHANNELS;
+ pdata = adata->dev->platform_data;
+ if (pdata == NULL) {
+ adata->fullscale = st_accel_default_pdata.fullscale;
+ adata->odr = st_accel_default_pdata.sampling_frequency;
+ } else {
+ adata->fullscale = pdata->fullscale;
+ adata->odr = pdata->sampling_frequency;
+ }
+
+ err = st_accel_init_sensor(indio_dev);
+ if (err < 0)
+ goto st_accel_iio_probe_error;
+
+ err = st_accel_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_accel_iio_probe_error;
+
+ if (*adata->irq_data_ready > 0) {
+ err = st_accel_probe_trigger(indio_dev);
+ if (err < 0)
+ goto acc_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto iio_device_register_error;
+
+ return err;
+
+iio_device_register_error:
+ st_accel_remove_trigger(indio_dev);
+acc_probe_trigger_error:
+ st_accel_deallocate_ring(indio_dev);
+st_accel_iio_probe_error:
+ return err;
+}
+EXPORT_SYMBOL(st_accel_iio_probe);
+
+void st_accel_iio_remove(struct iio_dev *indio_dev)
+{
+ iio_device_unregister(indio_dev);
+ st_accel_remove_trigger(indio_dev);
+ st_accel_deallocate_ring(indio_dev);
+ iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_accel_iio_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@xxxxxx>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_i2c.c
b/drivers/iio/accel/st_accel_i2c.c
new file mode 100644
index 0000000..7cfeb4c
--- /dev/null
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -0,0 +1,139 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@xxxxxx>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+
+
+#define ST_ACCEL_I2C_MULTIREAD 0x80
+
+static int st_accel_i2c_read_byte(struct st_accel_data *adata,
+ u8 reg_addr, u8 *res_byte)
+{
+ int err;
+
+ err = i2c_smbus_read_byte_data(to_i2c_client(adata->dev), reg_addr);
+ if (err < 0)
+ goto st_accel_i2c_read_byte_error;
+ *res_byte = err & 0xff;
+ return err;
+
+st_accel_i2c_read_byte_error:
+ return -EIO;
+}
+
+static int st_accel_i2c_read_multiple_byte(struct st_accel_data *adata,
+ u8 reg_addr, int len, u8 *data)
+{
+ int err;
+
+ if (adata->multiread_bit == true)
+ reg_addr |= ST_ACCEL_I2C_MULTIREAD;
+
+ err = i2c_smbus_read_i2c_block_data(to_i2c_client(adata->dev),
+ reg_addr, len, data);
+ if (err < 0)
+ goto st_accel_i2c_read_multiple_byte_error;
+
+ return err;
+
+st_accel_i2c_read_multiple_byte_error:
+ return -EIO;
+}
+
+static int st_accel_i2c_write_byte(struct st_accel_data *adata,
+ u8 reg_addr, u8 data)
+{
+ return i2c_smbus_write_byte_data(to_i2c_client(adata->dev),
+ reg_addr, data);
+}
+
+static int __devinit st_accel_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct st_accel_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &client->dev;
+ i2c_set_clientdata(client, indio_dev);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->name = client->name;
+
+ adata->read_byte = st_accel_i2c_read_byte;
+ adata->write_byte = st_accel_i2c_write_byte;
+ adata->read_multiple_byte = st_accel_i2c_read_multiple_byte;
+ adata->irq_data_ready = &client->irq;
+
+ err = st_accel_iio_probe(indio_dev);
+ if (err < 0)
+ goto acc_iio_default_error;
+
+ return 0;
+
+acc_iio_default_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int __devexit st_accel_i2c_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ st_accel_iio_remove(indio_dev);
+ return 0;
+}
+
+static const struct i2c_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LSM303D_ACCEL_DEV_NAME },
+ { LSM9DS0_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
+
+static struct i2c_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-i2c",
+ },
+ .probe = st_accel_i2c_probe,
+ .remove = __devexit_p(st_accel_i2c_remove),
+ .id_table = st_accel_id_table,
+};
+module_i2c_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@xxxxxx>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_spi.c
b/drivers/iio/accel/st_accel_spi.c
new file mode 100644
index 0000000..40279bd
--- /dev/null
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -0,0 +1,199 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@xxxxxx>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+
+
+#define ACC_SPI_READ 0x80;
+#define ACC_SPI_MULTIREAD 0xc0
+
+static int st_accel_spi_read_byte(struct st_accel_data *adata,
+ u8 reg_addr, u8 *res_byte)
+{
+ struct spi_message msg;
+ int err;
+ u8 tx;
+
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = &tx,
+ .bits_per_word = 8,
+ .len = 1,
+ },
+ {
+ .rx_buf = res_byte,
+ .bits_per_word = 8,
+ .len = 1,
+ }
+ };
+
+ mutex_lock(&adata->slock);
+ tx = reg_addr | ACC_SPI_READ;
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfers[0], &msg);
+ spi_message_add_tail(&xfers[1], &msg);
+ err = spi_sync(to_spi_device(adata->dev), &msg);
+ mutex_unlock(&adata->slock);
+ if (err)
+ goto acc_spi_read_byte_error;
+
+ return err;
+
+acc_spi_read_byte_error:
+ return -EIO;
+}
+
+static int st_accel_spi_read_multiple_byte(struct st_accel_data *adata,
+ u8 reg_addr, int len, u8 *data)
+{
+ struct spi_message msg;
+ int err;
+ u8 tx;
+
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = &tx,
+ .bits_per_word = 8,
+ .len = 1,
+ },
+ {
+ .rx_buf = data,
+ .bits_per_word = 8,
+ .len = len,
+ }
+ };
+
+ mutex_lock(&adata->slock);
+ if (adata->multiread_bit == true)
+ tx = reg_addr | ACC_SPI_MULTIREAD;
+ else
+ tx = reg_addr | ACC_SPI_READ;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfers[0], &msg);
+ spi_message_add_tail(&xfers[1], &msg);
+ err = spi_sync(to_spi_device(adata->dev), &msg);
+ mutex_unlock(&adata->slock);
+ if (err)
+ goto acc_spi_read_multiple_byte_error;
+ return len;
+
+acc_spi_read_multiple_byte_error:
+ return -EIO;
+}
+
+static int st_accel_spi_write_byte(struct st_accel_data *adata,
+ u8 reg_addr, u8 data)
+{
+ struct spi_message msg;
+ int err;
+ u8 tx[2];
+
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = tx,
+ .bits_per_word = 8,
+ .len = 2,
+ }
+ };
+
+ mutex_lock(&adata->slock);
+ tx[0] = reg_addr;
+ tx[1] = data;
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfers[0], &msg);
+ err = spi_sync(to_spi_device(adata->dev), &msg);
+ mutex_unlock(&adata->slock);
+
+ return err;
+}
+
+static int __devinit st_accel_spi_probe(struct spi_device *client)
+{
+ struct iio_dev *indio_dev;
+ struct st_accel_data *adata;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*adata));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto iio_device_alloc_error;
+ }
+
+ adata = iio_priv(indio_dev);
+ adata->dev = &client->dev;
+ spi_set_drvdata(client, indio_dev);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->name = client->modalias;
+
+ adata->read_byte = st_accel_spi_read_byte;
+ adata->write_byte = st_accel_spi_write_byte;
+ adata->read_multiple_byte = st_accel_spi_read_multiple_byte;
+ adata->irq_data_ready = &client->irq;
+
+ err = st_accel_iio_probe(indio_dev);
+ if (err < 0)
+ goto acc_iio_default_error;
+
+ return 0;
+
+acc_iio_default_error:
+ iio_device_free(indio_dev);
+iio_device_alloc_error:
+ return err;
+}
+
+static int __devexit st_accel_spi_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+
+ st_accel_iio_remove(indio_dev);
+ return 0;
+}
+
+static const struct spi_device_id st_accel_id_table[] = {
+ { LSM303DLH_ACCEL_DEV_NAME },
+ { LSM303DLHC_ACCEL_DEV_NAME },
+ { LIS3DH_ACCEL_DEV_NAME },
+ { LSM330D_ACCEL_DEV_NAME },
+ { LSM330DL_ACCEL_DEV_NAME },
+ { LSM330DLC_ACCEL_DEV_NAME },
+ { LSM303D_ACCEL_DEV_NAME },
+ { LSM9DS0_ACCEL_DEV_NAME },
+ { LIS331DLH_ACCEL_DEV_NAME },
+ { LSM303DL_ACCEL_DEV_NAME },
+ { LSM303DLM_ACCEL_DEV_NAME },
+ { LSM330_ACCEL_DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, st_accel_id_table);
+
+static struct spi_driver st_accel_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "st-accel-spi",
+ },
+ .probe = st_accel_spi_probe,
+ .remove = __devexit_p(st_accel_spi_remove),
+ .id_table = st_accel_id_table,
+};
+module_spi_driver(st_accel_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@xxxxxx>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers spi driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel_trigger.c
b/drivers/iio/accel/st_accel_trigger.c
new file mode 100644
index 0000000..7b57b7f
--- /dev/null
+++ b/drivers/iio/accel/st_accel_trigger.c
@@ -0,0 +1,84 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@xxxxxx>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/accel/st_accel.h>
+
+
+static int st_accel_trig_acc_set_state(struct iio_trigger *trig, bool
state)
+{
+ struct iio_dev *indio_dev = trig->private_data;
+ return st_accel_set_dataready_irq(indio_dev, state);
+}
+
+static const struct iio_trigger_ops st_accel_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = &st_accel_trig_acc_set_state,
+};
+
+int st_accel_probe_trigger(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ adata->trig = iio_trigger_alloc("%s-trigger", indio_dev->name);
+ if (adata->trig == NULL) {
+ err = -ENOMEM;
+ dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n");
+ goto iio_trigger_alloc_error;
+ }
+
+ err = request_threaded_irq(*adata->irq_data_ready,
+ iio_trigger_generic_data_rdy_poll,
+ NULL,
+ IRQF_TRIGGER_RISING,
+ adata->trig->name,
+ adata->trig);
+ if (err)
+ goto request_irq_error;
+
+ adata->trig->private_data = indio_dev;
+ adata->trig->ops = &st_accel_trigger_ops;
+ adata->trig->dev.parent = adata->dev;
+
+ err = iio_trigger_register(adata->trig);
+ if (err < 0) {
+ dev_err(&indio_dev->dev, "failed to register iio trigger.\n");
+ goto iio_trigger_register_error;
+ }
+ indio_dev->trig = adata->trig;
+
+ return 0;
+
+iio_trigger_register_error:
+ free_irq(*adata->irq_data_ready, adata->trig);
+request_irq_error:
+ iio_trigger_free(adata->trig);
+iio_trigger_alloc_error:
+ return err;
+}
+EXPORT_SYMBOL(st_accel_probe_trigger);
+
+void st_accel_remove_trigger(struct iio_dev *indio_dev)
+{
+ struct st_accel_data *adata = iio_priv(indio_dev);
+
+ iio_trigger_unregister(adata->trig);
+ free_irq(*adata->irq_data_ready, adata->trig);
+ iio_trigger_free(adata->trig);
+}
+EXPORT_SYMBOL(st_accel_remove_trigger);
diff --git a/include/linux/iio/accel/st_accel.h
b/include/linux/iio/accel/st_accel.h
new file mode 100644
index 0000000..1386488
--- /dev/null
+++ b/include/linux/iio/accel/st_accel.h
@@ -0,0 +1,119 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@xxxxxx>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+/*
+ * Supported sensors:
+ * LSM303DLH
+ * LSM303DLHC
+ * LIS3DH
+ * LSM330D
+ * LSM330DL
+ * LSM330DLC
+ * LSM303D
+ * LSM9DS0
+ * LIS331DLH
+ * LSM303DL
+ * LSM303DLM
+ * LSM330
+ */
+
+
+#ifndef ST_ACCEL_H
+#define ST_ACCEL_H
+
+#define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
+#define LSM303DLHC_ACCEL_DEV_NAME "lsm303dlhc_accel"
+#define LIS3DH_ACCEL_DEV_NAME "lis3dh"
+#define LSM330D_ACCEL_DEV_NAME "lsm330d_accel"
+#define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel"
+#define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel"
+#define LSM303D_ACCEL_DEV_NAME "lsm303d"
+#define LSM9DS0_ACCEL_DEV_NAME "lsm9ds0"
+#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh"
+#define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel"
+#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
+#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
+
+#define ST_ACCEL_NUMBER_ALL_CHANNELS 4
+#define ST_ACCEL_BYTE_FOR_CHANNEL 2
+#define ST_ACCEL_SCAN_X 0
+#define ST_ACCEL_SCAN_Y 1
+#define ST_ACCEL_SCAN_Z 2
+
+/**
+ * struct st_accel_data - ST accel device status
+ * @dev: Pointer to instance of struct device (I2C or SPI).
+ * @name: Name of the sensor in use.
+ * @enabled: Status of the sensor (0->off, 1->on).
+ * @index: Number used to point the sensor being used in the
+ * st_accel_sensors struct.
+ * @fullscale: Maximum range of measure by the sensor.
+ * @gain: Sensitivity of the sensor [ug/LSB].
+ * @odr: Output data rate of the sensor.
+ * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread.
+ * @read_byte: Function used to read one byte.
+ * @write_byte: Function used to write one byte.
+ * @read_multiple_byte: Function used to read multiple byte.
+ * @set_trigger_parent: Function used to set the trigger parent.
+ * @trig: The trigger in use by the core driver.
+ * @irq_data_ready: IRQ number for data ready on INT1 pin.
+ * @slock: mutex for read and write operation.
+ */
+
+struct st_accel_data {
+ struct device *dev;
+ bool enabled;
+ short index;
+
+ unsigned int fullscale;
+ unsigned int gain;
+ unsigned int odr;
+
+ bool multiread_bit;
+ int (*read_byte) (struct st_accel_data *adata, u8 reg_addr,
+ u8 *res_byte);
+ int (*write_byte) (struct st_accel_data *adata, u8 reg_addr, u8 data);
+ int (*read_multiple_byte) (struct st_accel_data *adata, u8 reg_addr,
+ int len, u8 *data);
+
+ struct iio_trigger *trig;
+ int *irq_data_ready;
+ struct mutex slock;
+};
+
+int st_accel_iio_probe(struct iio_dev *indio_dev);
+void st_accel_iio_remove(struct iio_dev *indio_dev);
+int st_accel_set_dataready_irq(struct iio_dev *indio_dev, bool enable);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_accel_probe_trigger(struct iio_dev *indio_dev);
+void st_accel_remove_trigger(struct iio_dev *indio_dev);
+int st_accel_allocate_ring(struct iio_dev *indio_dev);
+void st_accel_deallocate_ring(struct iio_dev *indio_dev);
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_accel_probe_trigger(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_accel_remove_trigger(struct iio_dev *indio_dev)
+{
+ return;
+}
+static inline int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+static inline void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+ return;
+}
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_ACCEL_H */
diff --git a/include/linux/platform_data/st_accel_pdata.h
b/include/linux/platform_data/st_accel_pdata.h
new file mode 100644
index 0000000..416489b
--- /dev/null
+++ b/include/linux/platform_data/st_accel_pdata.h
@@ -0,0 +1,27 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@xxxxxx>
+ *
+ * Licensed under the GPL-2.
+ */
+
+
+#ifndef ST_ACCEL_PDATA_H
+#define ST_ACCEL_PDATA_H
+
+
+/**
+ * struct st_accel_platform_data - ST accel device platform data
+ * @fullscale: Value of fullscale used for the sensor.
+ * @sampling_frequency: Value of sampling frequency used for the sensor.
+ */
+
+struct st_accel_platform_data {
+ int fullscale;
+ int sampling_frequency;
+};
+
+#endif /* ST_ACCEL_PDATA_H */
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
