On 10/23/10 21:29, Mike Frysinger wrote:
> From: Sonic Zhang <sonic.zhang@xxxxxxxxxx>
>
Why IIO and not hwmon? Needs justification.
Guessing it's for the alarm elements?
Limited review follows.
Some abi breakage that needs fixing. This one falls entirely
in areas we have covered. It's also not an adc, so should probably
be in a different directory if it does go in iio
> Signed-off-by: Sonic Zhang <sonic.zhang@xxxxxxxxxx>
> Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
Reviewed-by: Jonathan Cameron <jic23@xxxxxxxxx>
> ---
> drivers/staging/iio/adc/Kconfig | 7 +
> drivers/staging/iio/adc/Makefile | 1 +
> drivers/staging/iio/adc/ad7414.c | 573 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 581 insertions(+), 0 deletions(-)
> create mode 100644 drivers/staging/iio/adc/ad7414.c
>
> diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
> index 6d3b8bc..07fd1a7 100644
> --- a/drivers/staging/iio/adc/Kconfig
> +++ b/drivers/staging/iio/adc/Kconfig
> @@ -61,3 +61,10 @@ config AD7314
> help
> Say yes here to build support for Analog Devices AD7314
> temperature sensors.
> +
> +config AD7414
> + tristate "Analog Devices AD7414 and AD7415 temperature sensor driver"
> + depends on I2C
> + help
> + Say yes here to build support for Analog Devices AD7414 and AD7415
> + temperature sensors.
> diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
> index 04fd93b..c1ab11f 100644
> --- a/drivers/staging/iio/adc/Makefile
> +++ b/drivers/staging/iio/adc/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_AD7152) += ad7152.o
> obj-$(CONFIG_AD7291) += ad7291.o
> obj-$(CONFIG_AD7298) += ad7298.o
> obj-$(CONFIG_AD7314) += ad7314.o
> +obj-$(CONFIG_AD7414) += ad7414.o
> diff --git a/drivers/staging/iio/adc/ad7414.c b/drivers/staging/iio/adc/ad7414.c
> new file mode 100644
> index 0000000..b92c880
> --- /dev/null
> +++ b/drivers/staging/iio/adc/ad7414.c
> @@ -0,0 +1,573 @@
> +/*
> + * AD7414 digital temperature sensor driver supporting AD7414 and AD7415
> + *
> + * Copyright 2010 Analog Devices Inc.
> + *
> + * Licensed under the GPL-2 or later.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <linux/workqueue.h>
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/sysfs.h>
> +#include <linux/list.h>
> +#include <linux/i2c.h>
> +#include <linux/rtc.h>
> +
> +#include "../iio.h"
> +#include "../sysfs.h"
> +
> +/*
> + * AD7414 registers definition
> + */
> +
> +#define AD7414_TEMPERATURE 0
> +#define AD7414_CONFIG 1
> +#define AD7414_TEMPERATURE_HIGH 2
> +#define AD7414_TEMPERATURE_LOW 3
> +
> +/*
> + * AD7414 config bits
> + */
> +#define AD7414_TEST_MODE 0x3
> +#define AD7414_ONE_SHOT 0x4
> +#define AD7414_ALERT_RESET 0x8
> +#define AD7414_ALERT_POLARITY 0x10
> +#define AD7414_ALERT_EN 0x20
> +#define AD7414_FLTR 0x40
> +#define AD7414_PD 0x80
> +
> +/*
> + * AD7414 masks
> + */
> +#define AD7414_TEMP_SIGN 0x200
> +#define AD7414_TEMP_MASK 0xFFC0
> +#define AD7414_TEMP_OFFSET 6
> +#define AD7414_ALERT_FLAG 0x20
> +#define AD7414_T_SIGN 0x80
> +#define AD7414_T_HIGH_FLAG 0x10
> +#define AD7414_T_LOW_FLAG 0x8
> +
> +
> +/*
> + * struct ad7414_chip_info - chip specifc information
> + */
> +
> +struct ad7414_chip_info {
> + const char *name;
> + struct i2c_client *client;
> + struct iio_dev *indio_dev;
> + struct work_struct thresh_work;
> + s64 last_timestamp;
> + u8 mode;
> +};
> +
> +/*
> + * ad7414 register access by I2C
> + */
> +
> +static int ad7414_i2c_read(struct ad7414_chip_info *chip, u8 reg, u8 *data)
> +{
> + struct i2c_client *client = chip->client;
> + int ret = 0, len;
> +
> + ret = i2c_smbus_write_byte(client, reg);
> + if (ret < 0) {
> + dev_err(&client->dev, "I2C read register address error\n");
> + return ret;
> + }
> +
> + if (reg == AD7414_TEMPERATURE)
> + len = 2;
> + else
> + len = 1;
> +
> + ret = i2c_master_recv(client, data, len);
> + if (ret < 0) {
> + dev_err(&client->dev, "I2C read error\n");
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +static int ad7414_i2c_write(struct ad7414_chip_info *chip, u8 reg, u8 data)
> +{
> + struct i2c_client *client = chip->client;
> + int ret = 0;
> +
> + ret = i2c_smbus_write_byte_data(client, reg, data);
> + if (ret < 0)
> + dev_err(&client->dev, "I2C write error\n");
> +
> + return ret;
> +}
> +
> +static ssize_t ad7414_show_mode(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7414_chip_info *chip = dev_info->dev_data;
> +
> + if (chip->mode)
> + return sprintf(buf, "power-save\n");
> + else
> + return sprintf(buf, "full\n");
> +}
> +
> +static ssize_t ad7414_store_mode(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7414_chip_info *chip = dev_info->dev_data;
> + u8 config;
> + int ret;
> +
> + ret = ad7414_i2c_read(chip, AD7414_CONFIG, &config);
> + if (ret)
> + return -EIO;
> +
> + if (strcmp(buf, "full")) {
> + chip->mode = 0;
> + config &= ~AD7414_PD;
> + } else {
> + chip->mode = 1;
> + config |= AD7414_PD;
> + }
> +
> + ret = ad7414_i2c_write(chip, AD7414_CONFIG, config);
> + if (ret)
> + return -EIO;
> +
> + return ret;
> +}
> +
> +static IIO_DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
> + ad7414_show_mode,
> + ad7414_store_mode,
> + 0);
> +
> +static ssize_t ad7414_show_available_modes(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return sprintf(buf, "full\npower-save\n");
> +}
> +
> +static IIO_DEVICE_ATTR(available_modes, S_IRUGO, ad7414_show_available_modes, NULL, 0);
> +
> +static ssize_t ad7414_show_temperature(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7414_chip_info *chip = dev_info->dev_data;
> + u8 config;
> + u16 data;
> + char sign = ' ';
> + int ret;
> +
> + if (chip->mode) {
> + ret = ad7414_i2c_read(chip, AD7414_CONFIG, &config);
> + if (ret)
> + return -EIO;
> + ret = ad7414_i2c_write(chip, AD7414_CONFIG,
> + config | AD7414_ONE_SHOT);
> + if (ret)
> + return -EIO;
> + }
> +
> + ret = ad7414_i2c_read(chip, AD7414_TEMPERATURE, (u8 *)&data);
> + if (ret)
> + return -EIO;
> +
> + data = swab16(data) >> AD7414_TEMP_OFFSET;
> + if (data & AD7414_TEMP_SIGN) {
> + data = (AD7414_TEMP_SIGN << 1) - data;
> + sign = '-';
> + }
> +
> + return sprintf(buf, "%c%d.%.2d\n", sign, (data >> 2), (data & 3) * 25);
> +}
> +
> +static IIO_DEVICE_ATTR(temperature, S_IRUGO, ad7414_show_temperature, NULL, 0);
> +
> +static ssize_t ad7414_show_name(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7414_chip_info *chip = dev_info->dev_data;
> + return sprintf(buf, "%s\n", chip->name);
> +}
> +
> +static IIO_DEVICE_ATTR(name, S_IRUGO, ad7414_show_name, NULL, 0);
> +
> +static struct attribute *ad7414_attributes[] = {
> + &iio_dev_attr_available_modes.dev_attr.attr,
> + &iio_dev_attr_mode.dev_attr.attr,
> + &iio_dev_attr_temperature.dev_attr.attr,
> + &iio_dev_attr_name.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group ad7414_attribute_group = {
> + .attrs = ad7414_attributes,
> +};
> +
> +/*
> + * temperature bound events
> + */
> +
> +#define IIO_EVENT_CODE_AD7414_T_HIGH (IIO_EVENT_CODE_DEVICE_SPECIFIC + 1)
> +#define IIO_EVENT_CODE_AD7414_T_LOW (IIO_EVENT_CODE_DEVICE_SPECIFIC + 2)
> +
> +static void ad7414_interrupt_bh(struct work_struct *work_s)
> +{
> + struct ad7414_chip_info *chip =
> + container_of(work_s, struct ad7414_chip_info, thresh_work);
> + u16 status;
> + u8 config;
> + int ret;
> +
> + /* retrive ALART status */
> + ret = ad7414_i2c_read(chip, AD7414_TEMPERATURE, (u8 *)&status);
> + if (ret)
> + return;
> + status = swab16(status);
> +
> + /* clear ALART pin in chip configuration register */
> + ret = ad7414_i2c_read(chip, AD7414_CONFIG, &config);
> + if (ret)
> + return;
> + ret = ad7414_i2c_write(chip, AD7414_CONFIG,
> + config | AD7414_ALERT_RESET);
> + if (ret)
> + return;
> +
> + enable_irq(chip->client->irq);
> +
> + if (status & AD7414_T_HIGH_FLAG)
> + iio_push_event(chip->indio_dev, 0,
> + IIO_EVENT_CODE_AD7414_T_HIGH,
> + chip->last_timestamp);
> + else if (status & AD7414_T_LOW_FLAG)
> + iio_push_event(chip->indio_dev, 0,
> + IIO_EVENT_CODE_AD7414_T_LOW,
> + chip->last_timestamp);
> +}
> +
> +static int ad7414_interrupt(struct iio_dev *dev_info,
> + int index,
> + s64 timestamp,
> + int no_test)
> +{
> + struct ad7414_chip_info *chip = dev_info->dev_data;
> +
> + chip->last_timestamp = timestamp;
> + schedule_work(&chip->thresh_work);
> +
> + return 0;
> +}
> +
> +IIO_EVENT_SH(ad7414, &ad7414_interrupt);
> +
> +static ssize_t ad7414_show_enabled(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7414_chip_info *chip = dev_info->dev_data;
> + u8 config;
> + int ret;
> +
> + /* retrive ALART status */
> + ret = ad7414_i2c_read(chip, AD7414_CONFIG, &config);
> + if (ret)
> + return -EIO;
> +
> + return sprintf(buf, "%d\n", !!(config & AD7414_ALERT_EN));
> +}
> +
> +static ssize_t ad7414_set_enabled(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7414_chip_info *chip = dev_info->dev_data;
> + unsigned long data;
> + u8 config;
> + int ret;
> +
> + ret = strict_strtoul(buf, 10, &data);
> + if (ret)
> + return -EINVAL;
> +
> + /* retrive ALART status */
> + ret = ad7414_i2c_read(chip, AD7414_CONFIG, &config);
> + if (ret)
> + return -EIO;
> +
> + if (data)
> + ret = ad7414_i2c_write(chip, AD7414_CONFIG,
> + config & ~AD7414_ALERT_EN);
> + else
> + ret = ad7414_i2c_write(chip, AD7414_CONFIG,
> + config | AD7414_ALERT_EN);
> + if (ret)
> + return -EIO;
> +
> + return ret;
> +}
> +
> +static inline ssize_t ad7414_show_temperature_bound(struct device *dev,
> + struct device_attribute *attr,
> + u8 bound_reg,
> + char *buf)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7414_chip_info *chip = dev_info->dev_data;
> + s8 data;
> + int ret;
> +
> + ret = ad7414_i2c_read(chip, bound_reg, &data);
> + if (ret)
> + return -EIO;
> +
> + if (data & AD7414_T_SIGN)
> + data = (data&(~AD7414_T_SIGN)) - AD7414_T_SIGN;
> +
> + return sprintf(buf, "%d\n", data);
> +}
> +
> +static inline ssize_t ad7414_set_temperature_bound(struct device *dev,
> + struct device_attribute *attr,
> + u8 bound_reg,
> + const char *buf,
> + size_t len)
> +{
> + struct iio_dev *dev_info = dev_get_drvdata(dev);
> + struct ad7414_chip_info *chip = dev_info->dev_data;
> + long data;
> + s8 value;
> + int ret;
> +
> + ret = strict_strtol(buf, 10, &data);
> +
> + if (ret || data > 127 || data < -128)
> + return -EINVAL;
> +
> + value = (s8)data;
> + if (value < 0)
> + value = (AD7414_T_SIGN + value) | AD7414_T_SIGN;
> +
> + ret = ad7414_i2c_write(chip, bound_reg, value);
> + if (ret)
> + return -EIO;
> +
> + return ret;
> +}
> +
I think all these could be merged.
> +static ssize_t ad7414_show_temperature_high(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return ad7414_show_temperature_bound(dev, attr,
> + AD7414_TEMPERATURE_HIGH, buf);
> +}
> +
> +static inline ssize_t ad7414_set_temperature_high(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + return ad7414_set_temperature_bound(dev, attr,
> + AD7414_TEMPERATURE_HIGH, buf, len);
> +}
> +
> +static ssize_t ad7414_show_temperature_low(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return ad7414_show_temperature_bound(dev, attr,
> + AD7414_TEMPERATURE_LOW, buf);
> +}
> +
> +static inline ssize_t ad7414_set_temperature_low(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + return ad7414_set_temperature_bound(dev, attr,
> + AD7414_TEMPERATURE_LOW, buf, len);
> +}
> +
> +IIO_EVENT_ATTR_SH(t_bound_enabled, iio_event_ad7414,
> + ad7414_show_enabled, ad7414_set_enabled, 0);
Sorry, Sonic. Same issue here. Use normal device_attrs unless
they are the enable / disable attributes.
> +IIO_EVENT_ATTR_SH(temperature_high, iio_event_ad7414,
> + ad7414_show_temperature_high, ad7414_set_temperature_high, 0);
> +IIO_EVENT_ATTR_SH(temperature_low, iio_event_ad7414,
> + ad7414_show_temperature_low, ad7414_set_temperature_low, 0);
> +
> +static struct attribute *ad7414_event_attributes[] = {
non abi compiant.
probably:
> + &iio_event_attr_t_bound_enabled.dev_attr.attr,
iio_event_attr_temp_thresh_en
> + &iio_event_attr_temperature_high.dev_attr.attr,
iio_device_attr_temp_thresh_rising_value
> + &iio_event_attr_temperature_low.dev_attr.attr,
iio_device_attr_temp_thresh_falling_value.
> + NULL,
> +};
> +
> +static struct attribute_group ad7414_event_attribute_group = {
> + .attrs = ad7414_event_attributes,
> +};
> +
> +/*
> + * device probe and remove
> + */
> +
> +static int __devinit ad7414_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct ad7414_chip_info *chip;
> + int ret = 0;
> + u8 config;
> +
> + chip = kzalloc(sizeof(struct ad7414_chip_info), GFP_KERNEL);
> +
> + if (chip == NULL)
> + return -ENOMEM;
> +
> + /* this is only used for device removal purposes */
> + i2c_set_clientdata(client, chip);
> +
> + chip->client = client;
> + chip->name = id->name;
> +
> + chip->indio_dev = iio_allocate_device();
> + if (chip->indio_dev == NULL) {
> + ret = -ENOMEM;
> + goto error_free_chip;
> + }
> +
> + chip->indio_dev->dev.parent = &client->dev;
> + chip->indio_dev->attrs = &ad7414_attribute_group;
> + if (strcmp(id->name, "ad7414") == 0)
> + chip->indio_dev->event_attrs = &ad7414_event_attribute_group;
> + else
> + client->irq = 0;
> + chip->indio_dev->dev_data = (void *)chip;
> + chip->indio_dev->driver_module = THIS_MODULE;
> + chip->indio_dev->num_interrupt_lines = 1;
> + chip->indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + ret = iio_device_register(chip->indio_dev);
> + if (ret)
> + goto error_free_dev;
> +
> + if (client->irq) {
> + ret = iio_register_interrupt_line(client->irq,
> + chip->indio_dev,
> + 0,
> + client->irq_flags,
> + chip->name);
> + if (ret)
> + goto error_unreg_dev;
> +
> + /*
> + * The event handler list element refer to iio_event_ad7414.
> + * All event attributes bind to the same event handler.
> + * So, only register event handler once.
> + */
> + iio_add_event_to_list(&iio_event_ad7414,
> + &chip->indio_dev->interrupts[0]->ev_list);
> +
> + INIT_WORK(&chip->thresh_work, ad7414_interrupt_bh);
> +
> + ret = ad7414_i2c_read(chip, AD7414_CONFIG, &config);
> + if (ret) {
> + ret = -EIO;
> + goto error_unreg_irq;
> + }
> +
> + if (client->irq_flags & IRQF_TRIGGER_HIGH)
> + ret = ad7414_i2c_write(chip, AD7414_CONFIG,
> + config | AD7414_ALERT_POLARITY);
> + else
> + ret = ad7414_i2c_write(chip, AD7414_CONFIG,
> + config & ~AD7414_ALERT_POLARITY);
> + if (ret) {
> + ret = -EIO;
> + goto error_unreg_irq;
> + }
> + }
> +
> + dev_info(&client->dev, "%s temperature sensor registered.\n",
> + id->name);
> +
> + return 0;
> +error_unreg_irq:
> + iio_unregister_interrupt_line(chip->indio_dev, 0);
> +error_unreg_dev:
> + iio_device_unregister(chip->indio_dev);
> +error_free_dev:
> + iio_free_device(chip->indio_dev);
> +error_free_chip:
> + kfree(chip);
> +
> + return ret;
> +}
> +
> +static int __devexit ad7414_remove(struct i2c_client *client)
> +{
> + struct ad7414_chip_info *chip = i2c_get_clientdata(client);
> + struct iio_dev *indio_dev = chip->indio_dev;
> +
> + if (client->irq)
> + iio_unregister_interrupt_line(indio_dev, 0);
> + iio_device_unregister(indio_dev);
> + iio_free_device(chip->indio_dev);
> + kfree(chip);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id ad7414_id[] = {
> + { "ad7414", 0 },
> + { "ad7415", 0 },
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, ad7414_id);
> +
> +static struct i2c_driver ad7414_driver = {
> + .driver = {
> + .name = "ad7414",
> + },
> + .probe = ad7414_probe,
> + .remove = __devexit_p(ad7414_remove),
> + .id_table = ad7414_id,
> +};
> +
> +static __init int ad7414_init(void)
> +{
> + return i2c_add_driver(&ad7414_driver);
> +}
> +
> +static __exit void ad7414_exit(void)
> +{
> + i2c_del_driver(&ad7414_driver);
> +}
> +
> +MODULE_AUTHOR("Sonic Zhang <sonic.zhang@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Analog Devices AD7414 and AD7415 digital"
> + " temperature sensor driver");
> +MODULE_LICENSE("GPL v2");
> +
> +module_init(ad7414_init);
> +module_exit(ad7414_exit);
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
