Hi All, Given I've just said in a thread on lkml that I would be posting an RFC for event attribute naming shortly I've move this up a bit in my todo list :) This is very much an RFC. I'm looking for suggestions on how to make this clearer, I'm not that attached to any of the naming if someone can come up with something better. I would also like to do this change alongside Manuel's suggestion of a formal way of building the event codes (they will directly correspond). I am particularly unsure on how to handle periods. We have two types, one is used for averaging values (so the mean value of a particular time must be above the threshold) the other is used to insist the value must be constantly over the threshold for that time. The rate of change (ROC) elements are also somewhat confusing and I'm not sure I have everything covered there. We deliberately left these more or less alone in the previous abi round. This was mainly because we didn't have that many devices actually using them, so it was tricky to know what was needed. As before I'm going to define them only for one class of device. Generalization to other devices is mostly straight forwards. If anyone could point out special cases for particular device types that would be great. All of these can be extended with a direction and number (e.g. accel_x0_ etc) if needed. I'll just assume one axis here. Also, suppressing elements to generalize is fine. E.g. accel_thresh_period will cover both falling and rising cases. I've more or less restricted myself to element already in our drivers or that have turned up in others I intend to add support for shortly. IIRC our list of device with event support is: sca3000, lis3l02dq, max1363, adis16350, tsl2563 Others provide a few events for the buffers, but I'm not proposing to discuss those here. What: /sys/.../device[n]:event[m]/accel_thresh_rising_en Description: Enable/disable an event corresponding to the acceleration value rising past the threshold set in accel_thresh_rising_value. If accel_thresh_rising_period is used then the value must be above the threshold for that period. If accel_thresh_rising_mean_period is used then the average value (applied to moving window of this length) must be above the threshold. What: /sys/.../device[n]:event[m]/accel_thresh_rising_value Description: The value of the threshold for the event enabled by accel_thresh_rising_en. This is in raw units if the device provide accel_raw and m/s^2 if the device provides accel_input What: /sys/.../device[n]:event[m]/accel_thresh_rising_period Description: The period for which the threshold in accel_thresh_rising_value must be breached for the event to occur. Units of this parameter are seconds (note it will often be fixed point). What: /sys/.../device[n]:event[m]/accel_thresh_rising_mean_period Description: A moving window average is applied to the raw value. If this average is greater than accel_thresh_rising_value the event occurs. What: /sys/.../device[n]:event[m]/accel_thresh_falling_en Description: Enable/disable an event corresponding to the acceleration value falling past the threshold set in accel_thresh_falling_value. If accel_thresh_falling_period is present then the value must be below the threshold for that period. What: /sys/.../device[n]:event[m]/accel_thresh_falling_value What: /sys/.../device[n]:event[m]/accel_thresh_falling_period What: /sys/.../device[n]:event[m]/accel_thresh_falling_mean_period What: /sys/.../device[n]:event[m]/accel_mag_rising_en Description: Enable/disable an event equivalent to accel_thresh_rising_en but applied to the magnitude (and not sign) of the raw reading (or in m/s^2 if accel_input is used. If accel_mag_rising_period is present then the threshold must be breached for that period of time before an event occurs. What: /sys/.../device[n]:event[m]/accel_mag_rising_value What: /sys/.../device[n]:event[m]/accel_mag_rising_period What: /sys/.../device[n]:event[m]/accel_mag_rising_mean_period What: /sys/.../device[n]:event[m]/accel_mag_falling_en Description: Enable/disable an event equivalent to accel_thresh_falling_en but applied to the magnitude (and not sign) of the raw reading (or in m/s^2 if accel_input is used. If accel_mag_falling_period is present then the threshold must be breached for that period of time before an event occurs. What: /sys/.../device[n]:event[m]/accel_mag_falling_value What: /sys/.../device[n]:event[m]/accel_mag_falling_period What: /sys/.../device[n]:event[m]/accel_mag_faliing_mean_period What: /sys/.../device[n]:event[m]/accel_roc_rising_en Description: Enable/disable an event that occurs if the rate of change of the acceleration measurement. What: /sys/.../device[n]:event[m]/accel_roc_rising_value Description: The threshold on the rate of change that must be breached for the event to occur. RFC: How to work out the units of this are a little unclear. See ADIS16350 for an example. It tends to consist of the difference of pairs of samples neighbouring in time. This could get complex in a device with continuous frequency control. The units will have to be something like raw_counts / second (which after application of accel_scale will correspond to m/s^3. What: /sys/.../device[n]:events[m]/accel_roc_rising_period What: /sys/.../device[n]:events[m]/accel_roc_rising_mean_period (this is currently period on the adis16350) What: /sys/.../device[n]:event[m]/accel_roc_falling_en What: /sys/.../device[n]:event[m]/accel_roc_falling_value What: /sys/.../device[n]:event[m]/accel_roc_falling_period What: /sys/.../device[n]:event[m]/accel_roc_falling_mean_period I haven't yet seen a magnitude equivalent of roc in the wild so we can figure out what to call that another time. Accelerometers also often have things like freefall detectors (which may or may not correspond to accel_mag_falling depending on how it is implemented) and click / double click detectors. Given we don't care if they came from an accelerometer or something else I guess freefall_en, click_en and doubleclick_en would work? I want to run it by this list first (to keep the argument muted) then I'll send a patch to the documentation to lkml and see if anyone notices. I've cc'd a few people who might be interested or have recently been trying to tackle similar issues. Please cc anyone else who may contribute. Thanks, Jonathan -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html