On Wed, Jun 22, 2016 at 07:29:46AM -0400, Yendapally Reddy Dhananjaya Reddy wrote: > Add support for the PWM controller present in Broadcom's iProc > family of SoCs. This driver is derived from the pwm-bcm-kona > driver, with changes to the register offsets and bit positions. > It has been tested on the Northstar+ bcm958625HR board. > > Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@xxxxxxxxxxxx> > --- > drivers/pwm/Kconfig | 10 ++ > drivers/pwm/Makefile | 1 + > drivers/pwm/pwm-bcm-iproc.c | 327 ++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 338 insertions(+) > create mode 100644 drivers/pwm/pwm-bcm-iproc.c > [...] > diff --git a/drivers/pwm/pwm-bcm-iproc.c b/drivers/pwm/pwm-bcm-iproc.c > new file mode 100644 > index 0000000..952c457 > --- /dev/null > +++ b/drivers/pwm/pwm-bcm-iproc.c > @@ -0,0 +1,327 @@ [...] > +static const struct pwm_ops iproc_pwm_ops = { > + .config = iproc_pwmc_config_check, > + .set_polarity = iproc_pwmc_set_polarity, > + .enable = iproc_pwmc_enable, > + .disable = iproc_pwmc_disable, > + .owner = THIS_MODULE, > +}; Have you considered trying the new apply() callback instead of config()/set_polarity()/enable()/disable()? [...] Brian -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html