This patchset contains the pwm support for the Broadcom's iProc SoC's. The first patch provides the documentation details and the second patch contains the controller support details. The third patch contains the enable method for Northstar Plus SoC. This patch series has been tested on NSP bcm958625HR board. The pwm is not enabled for this board as the pins are open and not used. This patch series is based on v4.7.0-rc1 and is available from github repo: https://github.com/Broadcom/cygnus-linux.git branch: iproc-pwm-v4 Changes since v3 Addressed comments from Scott to include COMPILE_TEST Changes since v2 Rebased on v4.7.0-rc1 Changes since v1 Addressed the review comments from Thierry 1. Use separate driver for iProc SoC's. 2. Added Robs ack to the Documentation patch Yendapally Reddy Dhananjaya Reddy (3): Documentation: dt: Add Broadcom iproc pwm controller binding pwm: iproc: Add support for Broadcom iproc pwm controller ARM: dts: NSP: Add PWM Support to DT .../devicetree/bindings/pwm/brcm,iproc-pwm.txt | 21 ++ arch/arm/boot/dts/bcm-nsp.dtsi | 8 + drivers/pwm/Kconfig | 10 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-bcm-iproc.c | 327 +++++++++++++++++++++ 5 files changed, 367 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt create mode 100644 drivers/pwm/pwm-bcm-iproc.c -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html