Re: [PATCH v9 2/4] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

>>
>> >> +- clocks             : Reference to the clock entry.
>> >> +- phys                       : PHY reference with parameter 0.
>> >
>> > The specific value of the phy-specifier shouldn't matter to this
>> > binding. What should matter is what it logically corresponds to.
>>
>> I not quite following this. Are you suggest that I drop the value 0.
>> In the binding, one needs to specify the mode of operation - 0 is for
>> SATA. Can you explain more?
>
> The SATA device should not care what the argument for the PHY
> device is. You could connect the same device to another PHY
> that has a different set of arguments, which is the whole point
> of abstracting it.
>

I understand what you wrote here. We should not have an argument from
the host controller. Then my question is how should the PHY node
indicates that it needs to be configured itself as an SATA PHY?

-Loc
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux