On Tuesday 01 October 2013 12:03 PM, Yuvaraj Kumar C D wrote:
> This patch adds the sata phy driver for Exynos5250.Exynos5250 sata
> phy comprises of CMU and TRSV blocks which are of I2C register Map.
> So this patch also adds a i2c client driver, which is used configure
> the CMU and TRSV block of exynos5250 SATA PHY.
Why not make the Exynos5250 sata phy as a i2c client driver instead?
>
> This patch incorporates the generic phy framework to deal with sata
> phy.
>
> This patch depends on the below patch
> [1].drivers: phy: add generic PHY framework
> by Kishon Vijay Abraham I<kishon@xxxxxx>
>
> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
> Signed-off-by: Girish K S <ks.giri@xxxxxxxxxxx>
> Signed-off-by: Vasanth Ananthan <vasanth.a@xxxxxxxxxxx>
> ---
> drivers/phy/Kconfig | 6 +
> drivers/phy/Makefile | 1 +
> drivers/phy/exynos/Kconfig | 5 +
> drivers/phy/exynos/Makefile | 5 +
> drivers/phy/exynos/exynos5250_phy_i2c.c | 53 +++++++
> drivers/phy/exynos/sata_phy_exynos5250.c | 248 ++++++++++++++++++++++++++++++
> drivers/phy/exynos/sata_phy_exynos5250.h | 33 ++++
> 7 files changed, 351 insertions(+)
> create mode 100644 drivers/phy/exynos/Kconfig
> create mode 100644 drivers/phy/exynos/Makefile
> create mode 100644 drivers/phy/exynos/exynos5250_phy_i2c.c
> create mode 100644 drivers/phy/exynos/sata_phy_exynos5250.c
> create mode 100644 drivers/phy/exynos/sata_phy_exynos5250.h
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 5f85909..ab3d1c6 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -11,3 +11,9 @@ menuconfig GENERIC_PHY
> devices present in the kernel. This layer will have the generic
> API by which phy drivers can create PHY using the phy framework and
> phy users can obtain reference to the PHY.
> +
> +if GENERIC_PHY
NAK. Just select GENERIC_PHY from your driver Kconfig.
> +
> +source "drivers/phy/exynos/Kconfig"
> +
> +endif
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 9e9560f..e0223d7 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -3,3 +3,4 @@
> #
>
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> +obj-$(CONFIG_PHY_SAMSUNG_SATA) += exynos/
simply have phy-exynos5250 in drivers/phy.
> diff --git a/drivers/phy/exynos/Kconfig b/drivers/phy/exynos/Kconfig
> new file mode 100644
> index 0000000..fa125fb
> --- /dev/null
> +++ b/drivers/phy/exynos/Kconfig
> @@ -0,0 +1,5 @@
> +config PHY_SAMSUNG_SATA
> + tristate "Samsung Sata SerDes/PHY driver"
> + help
> + Support for Samsung sata SerDes/Phy found on Samsung
> + SoCs.
> diff --git a/drivers/phy/exynos/Makefile b/drivers/phy/exynos/Makefile
> new file mode 100644
> index 0000000..50dc7eb
> --- /dev/null
> +++ b/drivers/phy/exynos/Makefile
> @@ -0,0 +1,5 @@
> +#
> +# Makefile for the exynos phy drivers.
> +#
> +ccflags-y := -Idrivers/phy/exynos
> +obj-$(CONFIG_PHY_SAMSUNG_SATA) += sata_phy_exynos5250.o exynos5250_phy_i2c.o
> diff --git a/drivers/phy/exynos/exynos5250_phy_i2c.c b/drivers/phy/exynos/exynos5250_phy_i2c.c
> new file mode 100644
> index 0000000..9c75d3b
> --- /dev/null
> +++ b/drivers/phy/exynos/exynos5250_phy_i2c.c
> @@ -0,0 +1,53 @@
> +/*
> + * Copyright (C) 2013 Samsung Electronics Co.Ltd
> + * Author:
> + * Yuvaraj C D <yuvaraj.cd@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include "sata_phy_exynos5250.h"
> +
> +static int exynos_sata_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *i2c_id)
> +{
> + sataphy_attach_i2c_client(client);
> +
> + dev_info(&client->adapter->dev,
> + "attached %s into i2c adapter successfully\n",
> + client->name);
> +
> + return 0;
> +}
> +
> +static int exynos_sata_i2c_remove(struct i2c_client *client)
> +{
> + dev_info(&client->adapter->dev,
> + "detached %s from i2c adapter successfully\n",
> + client->name);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id phy_i2c_device_match[] = {
> + { "sata-phy-i2c", 0 },
> +};
> +MODULE_DEVICE_TABLE(of, phy_i2c_device_match);
> +
> +struct i2c_driver sataphy_i2c_driver = {
> + .probe = exynos_sata_i2c_probe,
> + .id_table = phy_i2c_device_match,
> + .remove = exynos_sata_i2c_remove,
> + .driver = {
> + .name = "sata-phy-i2c",
> + .owner = THIS_MODULE,
> + .of_match_table = (void *)phy_i2c_device_match,
> + },
> +};
As I just mentioned above, we can merge this driver with the below one.
> diff --git a/drivers/phy/exynos/sata_phy_exynos5250.c b/drivers/phy/exynos/sata_phy_exynos5250.c
> new file mode 100644
> index 0000000..726c10e
> --- /dev/null
> +++ b/drivers/phy/exynos/sata_phy_exynos5250.c
> @@ -0,0 +1,248 @@
> +/*
> + * Samsung SATA SerDes(PHY) driver
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Authors: Girish K S <ks.giri@xxxxxxxxxxx>
> + * Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/i2c.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +#include <linux/clk.h>
> +#include "sata_phy_exynos5250.h"
> +
> +static struct i2c_client *phy_i2c_client;
> +
> +struct exynos_sata_phy {
> + struct phy *phy;
> + struct clk *phyclk;
> + void __iomem *regs;
> + void __iomem *pmureg;
> +};
> +
> +static bool wait_for_reg_status(void __iomem *base, u32 reg, u32 checkbit,
> + u32 status)
> +{
> + unsigned long timeout = jiffies + usecs_to_jiffies(1000);
> + while (time_before(jiffies, timeout)) {
> + if ((readl(base + reg) & checkbit) == status)
> + return true;
> + }
> + return false;
> +}
> +
> +void sataphy_attach_i2c_client(struct i2c_client *sata_phy)
> +{
> + if (sata_phy)
> + phy_i2c_client = sata_phy;
> +}
> +
> +static int __set_phy_state(struct exynos_sata_phy *state, unsigned int on)
> +{
> + u32 reg;
> +
> + reg = readl(state->pmureg);
> + if (on)
> + reg |= EXYNOS_SATA_PHY_EN;
> + else
> + reg &= ~EXYNOS_SATA_PHY_EN;
> + writel(reg, state->pmureg);
> +
> + return 0;
> +}
> +
> +static int exynos_sata_phy_power_on(struct phy *phy)
> +{
> + struct exynos_sata_phy *state = phy_get_drvdata(phy);
> +
> + return __set_phy_state(state, 1);
> +}
> +
> +static int exynos_sata_phy_power_off(struct phy *phy)
> +{
> + struct exynos_sata_phy *state = phy_get_drvdata(phy);
> +
> + return __set_phy_state(state, 0);
> +}
> +
> +static int exynos_sataphy_parse_dt(struct device *dev,
> + struct exynos_sata_phy *sata)
> +{
> + struct device_node *np = dev->of_node;
> + struct device_node *sataphy_pmu;
> +
> + sataphy_pmu = of_get_child_by_name(np, "sataphy-pmu");
> + if (!sataphy_pmu) {
> + dev_err(dev, "No PMU interface for sata-phy\n");
> + return -ENODEV;
> + }
> +
> + sata->pmureg = of_iomap(sataphy_pmu, 0);
> + if (!sata->pmureg) {
> + dev_err(dev, "Can't get sata-phy pmu control register\n");
> + of_node_put(sataphy_pmu);
> + return -ENXIO;
> + }
> +
> + of_node_put(sataphy_pmu);
> + return 0;
> +}
> +
> +static int exynos_sata_phy_init(struct phy *phy)
> +{
> + u32 val;
> + int ret = 0;
> + u8 buf[] = { 0x3A, 0x0B };
> + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
> +
> + if (!phy_i2c_client)
> + return -EPROBE_DEFER;
> +
> + writel(EXYNOS_SATA_PHY_EN, sata_phy->pmureg);
> +
> + val = 0;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
> +
> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
> + val |= 0xFF;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
> +
> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
> + val |= LINK_RESET;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
> +
> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
> + val |= RESET_CMN_RST_N;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
> + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
> + val &= ~PHCTRLM_REF_RATE;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
> +
> + /* High speed enable for Gen3 */
> + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
> + val |= PHCTRLM_HIGH_SPEED;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
> +
> + val |= CTRL0_P0_PHY_CALIBRATED_SEL | CTRL0_P0_PHY_CALIBRATED;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_CTRL0);
> +
> + writel(0x2, sata_phy->regs + EXYNOS5_SATA_MODE0);
> +
> + ret = i2c_master_send(phy_i2c_client, buf, sizeof(buf));
> + if (ret < 0)
> + return -ENXIO;
> +
> + /* release cmu reset */
> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
> + val &= ~RESET_CMN_RST_N;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
> +
> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
> + val |= RESET_CMN_RST_N;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
> +
> + return (wait_for_reg_status(sata_phy->regs, EXYNOS5_SATA_PHSATA_STATM,
> + PHSTATM_PLL_LOCKED, 1)) ? 0 : -EINVAL;
> +
> +}
> +
> +static struct phy_ops exynos_sata_phy_ops = {
> + .init = exynos_sata_phy_init,
> + .power_on = exynos_sata_phy_power_on,
> + .power_off = exynos_sata_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static int exynos_sata_phy_probe(struct platform_device *pdev)
> +{
> + struct exynos_sata_phy *sata;
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + struct phy_provider *phy_provider;
> + char label[9];
> + int ret = 0;
> +
> + sata = devm_kzalloc(dev, sizeof(*sata), GFP_KERNEL);
> + if (!sata)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + sata->regs = devm_ioremap_resource(dev, res);
> + if (IS_ERR(sata->regs))
> + return PTR_ERR(sata->regs);
> +
> + dev_set_drvdata(dev, sata);
> +
> + if (i2c_add_driver(&sataphy_i2c_driver)) {
> + dev_err(dev, "failed to register sataphy i2c driver\n");
> + return -ENOENT;
> + }
> +
> + sata->phyclk = devm_clk_get(dev, "sata_phyctrl");
> + if (IS_ERR(sata->phyclk)) {
> + dev_err(dev, "failed to get clk for PHY\n");
> + return PTR_ERR(sata->phyclk);
> + }
> +
> + ret = clk_prepare_enable(sata->phyclk);
> + if (ret < 0) {
> + dev_err(dev, "failed to enable source clk\n");
> + return ret;
> + }
> +
> + if (dev->of_node) {
> + ret = exynos_sataphy_parse_dt(dev, sata);
> + if (ret)
> + return ret;
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev,
> + of_phy_simple_xlate);
> + if (IS_ERR(phy_provider))
> + return PTR_ERR(phy_provider);
> +
> + snprintf(label, sizeof(label), "%s.%d", "sata-phy", pdev->id);
> +
> + sata->phy = devm_phy_create(dev, pdev->id, &exynos_sata_phy_ops, label);
Alright. You are using a older version of PHY framework. I'll wait for you to
adapt to the latest version of PHY framework [1] before reviewing any further.
[1] git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git next
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
