Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Regarding the machine with 30 disks: It seems the errors follow the
disk enclosures.

Can you send me the output of:

for i in /sys/class/ata_device/*/gscr ; do echo $i ; cat $i ; done >
/tmp/gscr.dump

Regarding the machine with 10 disks, I see that all the drives have
been found; I don't see any other error from the /var/log/messages
snippet that could explain md not finding the volumes.

Gwendal.

On Mon, Mar 26, 2012 at 4:26 AM, ANEZAKI, Akira
<blackfire@xxxxxxxxxxxxxxx> wrote:
> Hello Gwendal,
>
> I got a log that failed to power cycle boot on the PC with 2PMPs. All
> HDDs weren't use JM20330.
>
> All HDDs were detected and attached. But root RAID is not built. So, the
> boot failed. Next rebooting was successful.
>
> The next power cycle had problem. Root RAID, etc. were built only one
> partition.
>
> These RAIDs are composed only with PC internal. PMPs don't matter.
> I think it very strange. Maybe there is a bug, SRST might trigger the
> problem. Of course, 3.1.x driver works fine.
>
> Best Regards,
> Akira
>
> (2012/03/26 18:50), ANEZAKI, Akira wrote:
>> Hello Gwendal,
>>
>> (2012/03/26 11:30), ANEZAKI, Akira wrote:
>>> Hello Gwendal,
>>>
>>> (2012/03/26 09:41), ANEZAKI, Akira wrote:
>>>
>>>>> If possible, could you switch 2 of the 4 enclosures [with their disks]
>>>>> that fails to the port controlled by the Sil3132 controller, reboot
>>>>> the machine with all its 30 drives and see if the failures follow the
>>>>> controller or the enclosure.
>>>>
>>>> Yes, I will do it as soon as possible. (Sorry, resyncing is runnning now.)
>
> --- 3.2.10 power cycle log ( unpatched ) ---
>   :
>> [    0.000000] Linux version 3.2.10-3.fc16.i686.PAE (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 15 20:37:01 UTC 2012
>   :
>> [    1.109107] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
>> [    1.109111] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
>> [    1.110534] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 19
>> [    1.110538] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 19
>> [    1.425771] ata3: SATA link down (SStatus 0 SControl 300)
>> [    1.565064] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [    1.565168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [    1.576064] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    1.580317] ata4.00: ATA-7: Maxtor 7V250F0, VA111630, max UDMA/133
>> [    1.580321] ata4.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
>> [    1.587163] ata4.00: configured for UDMA/133
>> [    1.608220] ata2.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
>> [    1.608223] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>> [    1.616082] ata1.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
>> [    1.616086] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>> [    1.683190] ata2.00: configured for UDMA/133
>> [    1.691047] ata1.00: configured for UDMA/133
>> [    2.062830] ata5: SATA max UDMA/100 host m128@0xfe8ffc00 port 0xfe8f8000 irq 17
>> [    2.062835] ata6: SATA max UDMA/100 host m128@0xfe8ffc00 port 0xfe8fa000 irq 17
>> [    2.062948] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
>> [    2.062952] ata8: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
>> [    2.065259] ata9: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9f8000 irq 18
>> [    2.065263] ata10: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9fa000 irq 18
>> [    2.217434] ata7.00: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.03, max UDMA/66
>> [    2.223422] ata7.00: configured for UDMA/66
>> [    4.082034] ata5: SATA link down (SStatus 0 SControl 0)
>> [    4.197035] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [    4.197372] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
>> [    4.199141] ata9.00: hard resetting link
>> [    4.537254] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [    4.537290] ata9.01: hard resetting link
>> [    4.963015] ata9.01: softreset failed (SRST command error)
>> [    5.073014] ata9.01: failed to read SCR 0 (Emask=0x1)
>> [    5.073019] ata9.01: reset failed (errno=-85), retrying in 10 secs
>> [    6.102041] ata6: SATA link down (SStatus 0 SControl 0)
>> [   14.537112] ata9.01: reset failed, giving up
>> [   14.537117] ata9.15: hard resetting link
>> [   14.537120] ata9: controller in dubious state, performing PORT_RST
>> [   16.691040] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   16.691389] ata9.00: hard resetting link
>> [   17.029255] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [   17.029290] ata9.01: hard resetting link
>> [   17.367252] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   17.367287] ata9.02: hard resetting link
>> [   17.683040] ata9.02: softreset failed (SRST command error)
>> [   17.683099] ata9.02: failed to read SCR 0 (Emask=0x1)
>> [   17.683103] ata9.02: reset failed (errno=-85), retrying in 10 secs
>> [   27.367023] ata9.02: reset failed, giving up
>> [   27.367028] ata9.15: hard resetting link
>> [   29.488078] ata9.15: softreset failed (SRST command error)
>> [   29.488082] ata9.15: reset failed (errno=-5), retrying in 8 secs
>> [   37.367018] ata9.15: hard resetting link
>> [   39.488071] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   39.488077] ata9.15: PMP revalidation failed (errno=-19)
>> [   44.488012] ata9.15: hard resetting link
>> [   46.620040] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   46.620470] ata9.00: hard resetting link
>> [   46.958247] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [   46.958285] ata9.01: hard resetting link
>> [   47.296247] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   47.296284] ata9.02: hard resetting link
>> [   47.634249] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   47.634286] ata9.03: hard resetting link
>> [   48.060017] ata9.03: softreset failed (SRST command error)
>> [   48.060035] ata9.03: failed to read SCR 0 (Emask=0x40)
>> [   48.060038] ata9.03: reset failed (errno=-85), retrying in 10 secs
>> [   57.634037] ata9.03: reset failed, giving up
>> [   57.634041] ata9.15: hard resetting link
>> [   57.634043] ata9: controller in dubious state, performing PORT_RST
>> [   59.788039] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   59.788377] ata9.00: hard resetting link
>> [   60.126253] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [   60.126289] ata9.01: hard resetting link
>> [   60.464250] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   60.464285] ata9.02: hard resetting link
>> [   60.802251] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   60.802286] ata9.03: hard resetting link
>> [   61.140252] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   61.140287] ata9.04: hard resetting link
>> [   61.445390] ata9.04: SATA link down (SStatus 0 SControl 320)
>> [   61.445457] ata9.05: hard resetting link
>> [   61.750359] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
>> [   61.779136] ata9.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
>> [   61.779141] ata9.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>> [   61.821129] ata9.00: configured for UDMA/100
>> [   61.849775] ata9.01: ATA-8: ST31500341AS, CC1H, max UDMA/133
>> [   61.849779] ata9.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>> [   61.891640] ata9.01: configured for UDMA/100
>> [   61.920328] ata9.02: ATA-8: ST31500341AS, CC1H, max UDMA/133
>> [   61.920333] ata9.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>> [   61.962282] ata9.02: configured for UDMA/100
>> [   61.990999] ata9.03: ATA-8: ST31500341AS, CC1H, max UDMA/133
>> [   61.991009] ata9.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>> [   62.032997] ata9.03: configured for UDMA/100
>> [   62.033088] ata9: EH complete
>> [   64.167041] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   64.167363] ata10.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
>> [   64.169254] ata10.00: hard resetting link
>> [   64.573260] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [   64.573299] ata10.01: hard resetting link
>> [   64.999017] ata10.01: softreset failed (SRST command error)
>> [   64.999034] ata10.01: failed to read SCR 0 (Emask=0x40)
>> [   64.999038] ata10.01: reset failed (errno=-85), retrying in 10 secs
>> [   74.573049] ata10.01: reset failed, giving up
>> [   74.573058] ata10.15: hard resetting link
>> [   74.573061] ata10: controller in dubious state, performing PORT_RST
>> [   76.727039] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   76.727371] ata10.00: hard resetting link
>> [   77.131252] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [   77.131287] ata10.01: hard resetting link
>> [   77.535261] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   77.535297] ata10.02: hard resetting link
>> [   77.851041] ata10.02: softreset failed (SRST command error)
>> [   77.961014] ata10.02: failed to read SCR 0 (Emask=0x1)
>> [   77.961018] ata10.02: reset failed (errno=-85), retrying in 10 secs
>> [   87.535028] ata10.02: reset failed, giving up
>> [   87.535033] ata10.15: hard resetting link
>> [   87.535035] ata10: controller in dubious state, performing PORT_RST
>> [   89.689041] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   89.689414] ata10.00: hard resetting link
>> [   90.093265] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [   90.093303] ata10.01: hard resetting link
>> [   90.497259] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   90.497296] ata10.02: hard resetting link
>> [   90.901259] ata10.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   90.901296] ata10.03: hard resetting link
>> [   91.327009] ata10.03: softreset failed (SRST command error)
>> [   91.327024] ata10.03: failed to read SCR 0 (Emask=0x40)
>> [   91.327026] ata10.03: reset failed (errno=-85), retrying in 10 secs
>> [  100.901043] ata10.03: reset failed, giving up
>> [  100.901048] ata10.15: hard resetting link
>> [  100.901051] ata10: controller in dubious state, performing PORT_RST
>> [  103.055046] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [  103.055433] ata10.00: hard resetting link
>> [  103.459260] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [  103.459296] ata10.01: hard resetting link
>> [  103.863260] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [  103.863296] ata10.02: hard resetting link
>> [  104.267287] ata10.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [  104.267332] ata10.03: hard resetting link
>> [  104.671261] ata10.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [  104.671297] ata10.04: hard resetting link
>> [  104.976391] ata10.04: SATA link down (SStatus 0 SControl 320)
>> [  104.976458] ata10.05: hard resetting link
>> [  105.281363] ata10.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
>> [  105.282235] ata10.00: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
>> [  105.282240] ata10.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>> [  105.283269] ata10.00: configured for UDMA/100
>> [  105.303836] ata10.01: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
>> [  105.303840] ata10.01: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>> [  105.304715] ata10.01: configured for UDMA/100
>> [  105.319063] ata10.02: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
>> [  105.319067] ata10.02: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>> [  105.319948] ata10.02: configured for UDMA/100
>> [  105.333306] ata10.03: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
>> [  105.333310] ata10.03: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>> [  105.334189] ata10.03: configured for UDMA/100
>> [  105.334259] ata10: EH complete
>   :
>> [  105.366782] md/raid1:md0: active with 2 out of 2 mirrors
>> [  105.366819] md0: detected capacity change from 0 to 314507264
>> [  105.385841]  md0:
>   :
>> [  140.072536] dracut Warning: No root device "block:/dev/disk/by-uuid/773cb4b3-4bb0-4705-b494-08cb9c2b5d73" found
> ------
>
> All HDDs are detected and attached. But root RAID was not built. And
> boot failed.
>
> --- 3.2.10 power cycle with RAID error ( unpatched ) ---
>   :
>> [    0.000000] Linux version 3.2.10-3.fc16.i686.PAE (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 15 20:37:01 UTC 2012
>   :
>> [    1.110108] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
>> [    1.110112] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
>> [    1.111539] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 19
>> [    1.111543] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 19
>> [    1.426760] ata3: SATA link down (SStatus 0 SControl 300)
>> [    1.566064] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [    1.566167] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [    1.577063] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [    1.581172] ata4.00: ATA-7: Maxtor 7V250F0, VA111630, max UDMA/133
>> [    1.581175] ata4.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
>> [    1.588394] ata4.00: configured for UDMA/133
>> [    1.609231] ata1.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
>> [    1.609235] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>> [    1.614032] ata2.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
>> [    1.614037] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>> [    1.684197] ata1.00: configured for UDMA/133
>> [    1.688994] ata2.00: configured for UDMA/133
>> [    2.064237] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
>> [    2.064240] ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
>> [    2.065434] ata7: SATA max UDMA/100 host m128@0xfe8ffc00 port 0xfe8f8000 irq 17
>> [    2.065438] ata8: SATA max UDMA/100 host m128@0xfe8ffc00 port 0xfe8fa000 irq 17
>> [    2.069205] ata9: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9f8000 irq 18
>> [    2.069210] ata10: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9fa000 irq 18
>> [    2.218490] ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.03, max UDMA/66
>> [    2.224448] ata5.00: configured for UDMA/66
>> [    4.085035] ata7: SATA link down (SStatus 0 SControl 0)
>> [    4.201038] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [    4.201371] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
>> [    4.204304] ata9.00: hard resetting link
>> [    4.542250] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [    4.542289] ata9.01: hard resetting link
>> [    4.968018] ata9.01: softreset failed (SRST command error)
>> [    4.968036] ata9.01: failed to read SCR 0 (Emask=0x40)
>> [    4.968039] ata9.01: reset failed (errno=-85), retrying in 10 secs
>> [    6.105031] ata8: SATA link down (SStatus 0 SControl 0)
>> [   14.542045] ata9.01: reset failed, giving up
>> [   14.542050] ata9.15: hard resetting link
>> [   14.542053] ata9: controller in dubious state, performing PORT_RST
>> [   16.696039] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   16.696373] ata9.00: hard resetting link
>> [   17.034255] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [   17.034291] ata9.01: hard resetting link
>> [   17.372252] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   17.372288] ata9.02: hard resetting link
>> [   17.798016] ata9.02: softreset failed (SRST command error)
>> [   17.908018] ata9.02: failed to read SCR 0 (Emask=0x1)
>> [   17.908022] ata9.02: reset failed (errno=-85), retrying in 10 secs
>> [   27.372093] ata9.02: reset failed, giving up
>> [   27.372097] ata9.15: hard resetting link
>> [   27.372100] ata9: controller in dubious state, performing PORT_RST
>> [   29.526040] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   29.526371] ata9.00: hard resetting link
>> [   29.864252] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [   29.864289] ata9.01: hard resetting link
>> [   30.202250] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   30.202287] ata9.02: hard resetting link
>> [   30.540251] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   30.540289] ata9.03: hard resetting link
>> [   30.966013] ata9.03: softreset failed (SRST command error)
>> [   31.076018] ata9.03: failed to read SCR 0 (Emask=0x1)
>> [   31.076022] ata9.03: reset failed (errno=-85), retrying in 10 secs
>> [   40.540022] ata9.03: reset failed, giving up
>> [   40.540027] ata9.15: hard resetting link
>> [   40.540029] ata9: controller in dubious state, performing PORT_RST
>> [   42.694040] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   42.694389] ata9.00: hard resetting link
>> [   43.032252] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [   43.032287] ata9.01: hard resetting link
>> [   43.370251] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   43.370286] ata9.02: hard resetting link
>> [   43.708250] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   43.708286] ata9.03: hard resetting link
>> [   44.046253] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   44.046289] ata9.04: hard resetting link
>> [   44.351390] ata9.04: SATA link down (SStatus 0 SControl 320)
>> [   44.351457] ata9.05: hard resetting link
>> [   44.656361] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
>> [   44.685158] ata9.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
>> [   44.685163] ata9.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>> [   44.727185] ata9.00: configured for UDMA/100
>> [   44.755818] ata9.01: ATA-8: ST31500341AS, CC1H, max UDMA/133
>> [   44.755822] ata9.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>> [   44.797689] ata9.01: configured for UDMA/100
>> [   44.826404] ata9.02: ATA-8: ST31500341AS, CC1H, max UDMA/133
>> [   44.826409] ata9.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>> [   44.868366] ata9.02: configured for UDMA/100
>> [   44.897084] ata9.03: ATA-8: ST31500341AS, CC1H, max UDMA/133
>> [   44.897089] ata9.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>> [   44.939073] ata9.03: configured for UDMA/100
>> [   44.939152] ata9: EH complete
>> [   47.072046] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   47.072428] ata10.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
>> [   47.075710] ata10.00: hard resetting link
>> [   47.479256] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [   47.479296] ata10.01: hard resetting link
>> [   47.905017] ata10.01: softreset failed (SRST command error)
>> [   47.905035] ata10.01: failed to read SCR 0 (Emask=0x40)
>> [   47.905039] ata10.01: reset failed (errno=-85), retrying in 10 secs
>> [   57.479018] ata10.01: reset failed, giving up
>> [   57.479023] ata10.15: hard resetting link
>> [   57.479026] ata10: controller in dubious state, performing PORT_RST
>> [   59.633039] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   59.633480] ata10.00: hard resetting link
>> [   60.037260] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [   60.037296] ata10.01: hard resetting link
>> [   60.441258] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   60.441293] ata10.02: hard resetting link
>> [   60.867016] ata10.02: softreset failed (SRST command error)
>> [   60.977018] ata10.02: failed to read SCR 0 (Emask=0x1)
>> [   60.977022] ata10.02: reset failed (errno=-85), retrying in 10 secs
>> [   70.441017] ata10.02: reset failed, giving up
>> [   70.441023] ata10.15: hard resetting link
>> [   70.441026] ata10: controller in dubious state, performing PORT_RST
>> [   72.595047] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   72.595436] ata10.00: hard resetting link
>> [   72.999257] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [   72.999295] ata10.01: hard resetting link
>> [   73.403258] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   73.403296] ata10.02: hard resetting link
>> [   73.807256] ata10.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   73.807293] ata10.03: hard resetting link
>> [   74.233017] ata10.03: softreset failed (SRST command error)
>> [   74.343014] ata10.03: failed to read SCR 0 (Emask=0x1)
>> [   74.343018] ata10.03: reset failed (errno=-85), retrying in 10 secs
>> [   83.807022] ata10.03: reset failed, giving up
>> [   83.807027] ata10.15: hard resetting link
>> [   83.807030] ata10: controller in dubious state, performing PORT_RST
>> [   85.961042] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [   85.961498] ata10.00: hard resetting link
>> [   86.365267] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
>> [   86.365303] ata10.01: hard resetting link
>> [   86.769251] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   86.769288] ata10.02: hard resetting link
>> [   87.173252] ata10.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   87.173287] ata10.03: hard resetting link
>> [   87.577251] ata10.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   87.577286] ata10.04: hard resetting link
>> [   87.882390] ata10.04: SATA link down (SStatus 0 SControl 320)
>> [   87.882457] ata10.05: hard resetting link
>> [   88.187364] ata10.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
>> [   88.188237] ata10.00: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
>> [   88.188241] ata10.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>> [   88.189269] ata10.00: configured for UDMA/100
>> [   88.210802] ata10.01: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
>> [   88.210807] ata10.01: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>> [   88.211684] ata10.01: configured for UDMA/100
>> [   88.231774] ata10.02: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
>> [   88.231779] ata10.02: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>> [   88.232656] ata10.02: configured for UDMA/100
>> [   88.242663] ata10.03: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
>> [   88.242668] ata10.03: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>> [   88.243540] ata10.03: configured for UDMA/100
>> [   88.243611] ata10: EH complete
>   :
>> [   88.279749] md/raid1:md0: active with 2 out of 2 mirrors
>> [   88.279779] md0: detected capacity change from 0 to 314507264
>> [   88.298379]  md0:
>   :
>> [  100.905944] md/raid1:md1: active with 1 out of 2 mirrors
>> [  100.905973] md1: detected capacity change from 0 to 311163576320
>> [  100.908115] dracut: mdadm: started /dev/md1
>   :
>> [  100.922165] md/raid1:md2: active with 1 out of 2 mirrors
>> [  100.922198] md2: detected capacity change from 0 to 8589869056
>> [  100.924335] dracut: mdadm: started /dev/md2
>   :
>> [  123.802802] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>> [  123.821298] NFSD: starting 90-second grace period
>   :
> ------
>
> All HDDs were detected and attached. But md1 and md2 were build with
> single partition.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux