Akira, Now I see your problem. Indeed on ata7, ata10, we have a problem. I notice however some messages I did not see before: >> [ 4.856382] ata7.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 4.858742] ata7.00: hard resetting link >> [ 14.843039] ata7.00: softreset failed (timeout) >> [ 17.836402] ata7.15: qc timeout (cmd 0xe4) The later indicates that the PMP is stuck and the host can not read its internal register. Is it possible that the PMP in these 4 enclosures you are using have a different firmware than the other ones? Firmware 1.0114 is available at: http://www.siliconimage.com/support/searchresults.aspx?pid=26&cat=23 >From the release notes: """- Fix SRST and initial two RegFIS Problem.""" Gwendal. On Thu, Mar 22, 2012 at 7:02 AM, ANEZAKI, Akira <fireblade1230@xxxxxxxxxxx> wrote: > Hello Gwendal, > > I attached the dmesg logs of the PC that has 6 PMPs and 38 HDDs. > ata5 and ata6 are SiI3124. 4 HDDs are connected to each port via PMP. > These 8 HDDs require spin up. > From ata7 to ata10 are SiI3132. 5 HDDs are connected to each port via > PMP. And these 20 HDDs are always spin up while power is on. All HDDs > connected to ata5 and ata6 are identified but slow with original 3.2.x > driver. Some of HDDs connected to ata7,..., ata10 are not identified. > So, I deleted ata5/6 messages from logs because logs become very long. > > --- 3.2.10 power cycle log ( not patched ) --- > : >> [ 0.000000] Linux version 3.2.10-3.fc16.i686.PAE (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 15 20:37:01 UTC 2012 > : >> [ 2.728377] ata7: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff0000 irq 17 >> [ 2.728381] ata8: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff2000 irq 17 >> [ 2.728385] ata9: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff4000 irq 17 >> [ 2.728388] ata10: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff6000 irq 17 > : >> [ 4.856020] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 4.856382] ata7.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 4.858742] ata7.00: hard resetting link >> [ 14.843039] ata7.00: softreset failed (timeout) >> [ 17.836402] ata7.15: qc timeout (cmd 0xe4) >> [ 17.836418] ata7.00: failed to read SCR 0 (Emask=0x5) >> [ 17.836422] ata7.00: reset failed, giving up >> [ 17.836427] ata7.15: hard resetting link >> [ 19.963714] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 19.964339] ata7.00: hard resetting link >> [ 29.949543] ata7.00: softreset failed (timeout) >> [ 32.942886] ata7.15: qc timeout (cmd 0xe4) >> [ 32.942902] ata7.00: failed to read SCR 0 (Emask=0x5) >> [ 32.942906] ata7.00: reset failed, giving up >> [ 32.942911] ata7.15: hard resetting link >> [ 35.070205] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 35.070883] ata7.00: hard resetting link >> [ 45.055960] ata7.00: softreset failed (timeout) >> [ 48.049443] ata7.15: qc timeout (cmd 0xe4) >> [ 48.049460] ata7.00: failed to read SCR 0 (Emask=0x5) >> [ 48.049464] ata7.00: reset failed, giving up >> [ 48.049467] ata7.00: failed to recover link after 3 tries, disabling >> [ 48.049472] ata7.15: hard resetting link >> [ 50.176735] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 50.481193] ata7.01: hard resetting link >> [ 50.884173] ata7.01: link resume succeeded after 1 retries >> [ 50.996894] ata7.01: softreset failed (SRST command error) >> [ 50.996972] ata7.01: failed to read SCR 0 (Emask=0x1) >> [ 50.996978] ata7.01: reset failed (errno=-85), retrying in 10 secs >> [ 60.459007] ata7.01: reset failed, giving up >> [ 60.459013] ata7.15: hard resetting link >> [ 62.575241] ata7.15: softreset failed (SRST command error) >> [ 62.575247] ata7.15: reset failed (errno=-5), retrying in 8 secs >> [ 70.436781] ata7.15: hard resetting link >> [ 72.553168] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 72.553176] ata7.15: PMP revalidation failed (errno=-19) >> [ 77.542029] ata7.15: hard resetting link >> [ 79.669334] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 79.973812] ata7.01: hard resetting link >> [ 80.376789] ata7.01: link resume succeeded after 1 retries >> [ 80.489507] ata7.01: softreset failed (SRST command error) >> [ 80.489553] ata7.01: failed to read SCR 0 (Emask=0x1) >> [ 80.489559] ata7.01: reset failed (errno=-85), retrying in 10 secs >> [ 89.951587] ata7.01: reset failed, giving up >> [ 89.951594] ata7.15: hard resetting link >> [ 92.067853] ata7.15: softreset failed (SRST command error) >> [ 92.067859] ata7.15: reset failed (errno=-5), retrying in 8 secs >> [ 99.929408] ata7.15: hard resetting link >> [ 102.045764] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 102.045772] ata7.15: PMP revalidation failed (errno=-19) >> [ 107.034803] ata7.15: hard resetting link >> [ 109.161947] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 109.466423] ata7.01: hard resetting link >> [ 109.869323] ata7.01: link resume succeeded after 1 retries >> [ 110.091871] ata7.01: softreset failed (SRST command error) >> [ 110.091987] ata7.01: failed to read SCR 0 (Emask=0x1) >> [ 110.091993] ata7.01: reset failed (errno=-85), retrying in 10 secs >> [ 119.444232] ata7.01: reset failed, giving up >> [ 119.444238] ata7.01: failed to recover link after 3 tries, disabling >> [ 119.444243] ata7.15: hard resetting link >> [ 119.444247] ata7: controller in dubious state, performing PORT_RST >> [ 121.593366] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 122.300882] ata7.01: link resume succeeded after 1 retries >> [ 122.402786] ata7.02: hard resetting link >> [ 122.805748] ata7.02: link resume succeeded after 1 retries >> [ 123.028249] ata7.02: softreset failed (SRST command error) >> [ 123.127975] ata7.02: failed to read SCR 0 (Emask=0x1) >> [ 123.127981] ata7.02: reset failed (errno=-85), retrying in 10 secs >> [ 132.380480] ata7.02: reset failed, giving up >> [ 132.380487] ata7.15: hard resetting link >> [ 132.380492] ata7: controller in dubious state, performing PORT_RST >> [ 134.529730] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 135.237187] ata7.01: link resume succeeded after 1 retries >> [ 135.339040] ata7.02: hard resetting link >> [ 135.742069] ata7.02: link resume succeeded after 1 retries >> [ 135.854773] ata7.02: softreset failed (SRST command error) >> [ 135.964517] ata7.02: failed to read SCR 0 (Emask=0x1) >> [ 135.964523] ata7.02: reset failed (errno=-85), retrying in 10 secs >> [ 145.316864] ata7.02: reset failed, giving up >> [ 145.316870] ata7.15: hard resetting link >> [ 145.316874] ata7: controller in dubious state, performing PORT_RST >> [ 147.466039] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 148.173548] ata7.01: link resume succeeded after 1 retries >> [ 148.275398] ata7.02: hard resetting link >> [ 148.678350] ata7.02: link resume succeeded after 1 retries >> [ 148.791012] ata7.02: softreset failed (SRST command error) >> [ 148.791027] ata7.02: failed to read SCR 0 (Emask=0x40) >> [ 148.791031] ata7.02: reset failed (errno=-85), retrying in 10 secs >> [ 158.253189] ata7.02: reset failed, giving up >> [ 158.253194] ata7.02: failed to recover link after 3 tries, disabling >> [ 158.253200] ata7.15: hard resetting link >> [ 160.369472] ata7.15: softreset failed (SRST command error) >> [ 160.369479] ata7.15: reset failed (errno=-5), retrying in 8 secs >> [ 168.230986] ata7.15: hard resetting link >> [ 170.347310] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 170.347320] ata7.15: PMP revalidation failed (errno=-19) >> [ 175.336294] ata7.15: hard resetting link >> [ 177.463536] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 178.171042] ata7.01: link resume succeeded after 1 retries >> [ 178.675862] ata7.02: link resume succeeded after 1 retries >> [ 178.777741] ata7.03: hard resetting link >> [ 179.180751] ata7.03: link resume succeeded after 1 retries >> [ 179.326643] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 179.326676] ata7.04: hard resetting link >> [ 179.729532] ata7.04: link resume succeeded after 1 retries >> [ 179.842249] ata7.04: softreset failed (SRST command error) >> [ 179.842266] ata7.04: failed to read SCR 0 (Emask=0x40) >> [ 179.842271] ata7.04: reset failed (errno=-85), retrying in 10 secs >> [ 189.304267] ata7.04: reset failed, giving up >> [ 189.304274] ata7.15: hard resetting link >> [ 191.420632] ata7.15: softreset failed (SRST command error) >> [ 191.420638] ata7.15: reset failed (errno=-5), retrying in 8 secs >> [ 199.282157] ata7.15: hard resetting link >> [ 201.398523] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 201.398530] ata7.15: PMP revalidation failed (errno=-19) >> [ 206.387708] ata7.15: hard resetting link >> [ 208.514709] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 209.222203] ata7.01: link resume succeeded after 1 retries >> [ 209.727084] ata7.02: link resume succeeded after 1 retries >> [ 209.828920] ata7.03: hard resetting link >> [ 210.231971] ata7.03: link resume succeeded after 1 retries >> [ 210.366787] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 210.366845] ata7.04: hard resetting link >> [ 210.769750] ata7.04: link resume succeeded after 1 retries >> [ 210.882448] ata7.04: softreset failed (SRST command error) >> [ 210.992171] ata7.04: failed to read SCR 0 (Emask=0x1) >> [ 210.992178] ata7.04: reset failed (errno=-85), retrying in 10 secs >> [ 220.344472] ata7.04: reset failed, giving up >> [ 220.344480] ata7.15: hard resetting link >> [ 220.344485] ata7: controller in dubious state, performing PORT_RST >> [ 222.493730] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 223.201162] ata7.01: link resume succeeded after 1 retries >> [ 223.706048] ata7.02: link resume succeeded after 1 retries >> [ 223.807935] ata7.03: hard resetting link >> [ 224.210944] ata7.03: link resume succeeded after 1 retries >> [ 224.357054] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 224.357092] ata7.04: hard resetting link >> [ 224.759727] ata7.04: link resume succeeded after 1 retries >> [ 224.872381] ata7.04: softreset failed (SRST command error) >> [ 224.982171] ata7.04: failed to read SCR 0 (Emask=0x1) >> [ 224.982177] ata7.04: reset failed (errno=-85), retrying in 10 secs >> [ 234.334455] ata7.04: reset failed, giving up >> [ 234.334460] ata7.04: failed to recover link after 3 tries, disabling >> [ 234.334466] ata7.15: hard resetting link >> [ 234.334470] ata7: controller in dubious state, performing PORT_RST >> [ 236.483626] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 237.191170] ata7.01: link resume succeeded after 1 retries >> [ 237.696026] ata7.02: link resume succeeded after 1 retries >> [ 238.200931] ata7.04: link resume succeeded after 1 retries >> [ 238.302815] ata7.03: hard resetting link >> [ 238.705815] ata7.03: link resume succeeded after 1 retries >> [ 238.851663] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 238.851697] ata7.05: hard resetting link >> [ 239.156074] ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 239.171748] ata7.03: ATA-7: WDC WD2500BB-22RDA0, 20.00K20, max UDMA/100 >> [ 239.171755] ata7.03: 488397168 sectors, multi 0: LBA48 >> [ 239.172994] ata7.03: configured for UDMA/100 >> [ 239.173063] ata7: EH complete >> [ 241.301015] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 241.301401] ata8.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 241.304393] ata8.00: hard resetting link >> [ 251.288864] ata8.00: softreset failed (timeout) >> [ 254.282482] ata8.15: qc timeout (cmd 0xe4) >> [ 254.282498] ata8.00: failed to read SCR 0 (Emask=0x5) >> [ 254.282502] ata8.00: reset failed, giving up >> [ 254.282507] ata8.15: hard resetting link >> [ 256.308766] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 256.309087] ata8.00: hard resetting link >> [ 266.294599] ata8.00: softreset failed (timeout) >> [ 269.287996] ata8.15: qc timeout (cmd 0xe4) >> [ 269.288012] ata8.00: failed to read SCR 0 (Emask=0x5) >> [ 269.288016] ata8.00: reset failed, giving up >> [ 269.288021] ata8.15: hard resetting link >> [ 271.415256] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 271.415676] ata8.00: hard resetting link >> [ 281.400112] ata8.00: softreset failed (timeout) >> [ 284.393557] ata8.15: qc timeout (cmd 0xe4) >> [ 284.393574] ata8.00: failed to read SCR 0 (Emask=0x5) >> [ 284.393578] ata8.00: reset failed, giving up >> [ 284.393581] ata8.00: failed to recover link after 3 tries, disabling >> [ 284.393586] ata8.15: hard resetting link >> [ 286.520673] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 286.825285] ata8.01: hard resetting link >> [ 287.228273] ata8.01: link resume succeeded after 1 retries >> [ 287.340950] ata8.01: softreset failed (SRST command error) >> [ 287.341009] ata8.01: failed to read SCR 0 (Emask=0x1) >> [ 287.341014] ata8.01: reset failed (errno=-85), retrying in 10 secs >> [ 296.802999] ata8.01: reset failed, giving up >> [ 296.803006] ata8.15: hard resetting link >> [ 298.919298] ata8.15: softreset failed (SRST command error) >> [ 298.919304] ata8.15: reset failed (errno=-5), retrying in 8 secs >> [ 306.780857] ata8.15: hard resetting link >> [ 308.897206] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 308.897213] ata8.15: PMP revalidation failed (errno=-19) >> [ 313.886328] ata8.15: hard resetting link >> [ 316.013386] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 316.317852] ata8.01: hard resetting link >> [ 316.720861] ata8.01: link resume succeeded after 1 retries >> [ 316.833555] ata8.01: softreset failed (SRST command error) >> [ 316.943305] ata8.01: failed to read SCR 0 (Emask=0x1) >> [ 316.943310] ata8.01: reset failed (errno=-85), retrying in 10 secs >> [ 326.295601] ata8.01: reset failed, giving up >> [ 326.295609] ata8.15: hard resetting link >> [ 326.295614] ata8: controller in dubious state, performing PORT_RST >> [ 328.444830] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 328.749267] ata8.01: hard resetting link >> [ 329.152302] ata8.01: link resume succeeded after 1 retries >> [ 329.264987] ata8.01: softreset failed (SRST command error) >> [ 329.374746] ata8.01: failed to read SCR 0 (Emask=0x1) >> [ 329.374751] ata8.01: reset failed (errno=-85), retrying in 10 secs >> [ 338.727034] ata8.01: reset failed, giving up >> [ 338.727039] ata8.01: failed to recover link after 3 tries, disabling >> [ 338.727045] ata8.15: hard resetting link >> [ 338.727048] ata8: controller in dubious state, performing PORT_RST >> [ 340.876275] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 341.583749] ata8.01: link resume succeeded after 1 retries >> [ 341.685751] ata8.02: hard resetting link >> [ 342.088629] ata8.02: link resume succeeded after 1 retries >> [ 342.223408] ata8.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 342.223441] ata8.03: hard resetting link >> [ 342.626462] ata8.03: link resume succeeded after 1 retries >> [ 342.761370] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 342.761404] ata8.04: hard resetting link >> [ 343.076391] ata8.04: softreset failed (SRST command error) >> [ 343.076449] ata8.04: failed to read SCR 0 (Emask=0x1) >> [ 343.076455] ata8.04: reset failed (errno=-85), retrying in 10 secs >> [ 352.738995] ata8.04: reset failed, giving up >> [ 352.739001] ata8.15: hard resetting link >> [ 354.855321] ata8.15: softreset failed (SRST command error) >> [ 354.855327] ata8.15: reset failed (errno=-5), retrying in 8 secs >> [ 362.716861] ata8.15: hard resetting link >> [ 364.834209] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 364.834217] ata8.15: PMP revalidation failed (errno=-19) >> [ 369.823118] ata8.15: hard resetting link >> [ 371.950402] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 372.657852] ata8.01: link resume succeeded after 1 retries >> [ 372.759682] ata8.02: hard resetting link >> [ 373.162733] ata8.02: link resume succeeded after 1 retries >> [ 373.297762] ata8.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 373.297795] ata8.03: hard resetting link >> [ 373.700539] ata8.03: link resume succeeded after 1 retries >> [ 373.835515] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 373.835549] ata8.04: hard resetting link >> [ 374.150481] ata8.04: softreset failed (SRST command error) >> [ 374.150528] ata8.04: failed to read SCR 0 (Emask=0x1) >> [ 374.150533] ata8.04: reset failed (errno=-85), retrying in 10 secs >> [ 383.813191] ata8.04: reset failed, giving up >> [ 383.813198] ata8.15: hard resetting link >> [ 385.929331] ata8.15: softreset failed (SRST command error) >> [ 385.929337] ata8.15: reset failed (errno=-5), retrying in 8 secs >> [ 393.790968] ata8.15: hard resetting link >> [ 395.907164] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 395.907172] ata8.15: PMP revalidation failed (errno=-19) >> [ 400.896325] ata8.15: hard resetting link >> [ 403.023517] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 403.731005] ata8.01: link resume succeeded after 1 retries >> [ 403.832842] ata8.02: hard resetting link >> [ 404.235865] ata8.02: link resume succeeded after 1 retries >> [ 404.370794] ata8.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 404.370849] ata8.03: hard resetting link >> [ 404.773633] ata8.03: link resume succeeded after 1 retries >> [ 404.908669] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 404.908703] ata8.04: hard resetting link >> [ 405.223579] ata8.04: softreset failed (SRST command error) >> [ 405.333350] ata8.04: failed to read SCR 0 (Emask=0x1) >> [ 405.333356] ata8.04: reset failed (errno=-85), retrying in 10 secs >> [ 414.886197] ata8.04: reset failed, giving up >> [ 414.886202] ata8.04: failed to recover link after 3 tries, disabling >> [ 414.886208] ata8.15: hard resetting link >> [ 414.886211] ata8: controller in dubious state, performing PORT_RST >> [ 417.035450] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 417.742943] ata8.01: link resume succeeded after 1 retries >> [ 418.247823] ata8.04: link resume succeeded after 1 retries >> [ 418.349670] ata8.02: hard resetting link >> [ 418.752703] ata8.02: link resume succeeded after 1 retries >> [ 418.887633] ata8.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 418.887669] ata8.03: hard resetting link >> [ 419.290512] ata8.03: link resume succeeded after 1 retries >> [ 419.425418] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 419.425451] ata8.05: hard resetting link >> [ 419.729769] ata8.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 419.774605] ata8.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 419.774611] ata8.02: 625142448 sectors, multi 0: LBA48 >> [ 419.774617] ata8.02: applying bridge limits >> [ 419.832687] ata8.02: configured for UDMA/100 >> [ 419.873220] ata8.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 419.873226] ata8.03: 625142448 sectors, multi 0: LBA48 >> [ 419.931259] ata8.03: configured for UDMA/100 >> [ 419.931327] ata8: EH complete >> [ 422.060283] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 422.060785] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 422.064165] ata9.00: hard resetting link >> [ 432.051137] ata9.00: softreset failed (timeout) >> [ 435.044561] ata9.15: qc timeout (cmd 0xe4) >> [ 435.044578] ata9.00: failed to read SCR 0 (Emask=0x5) >> [ 435.044582] ata9.00: reset failed, giving up >> [ 435.044587] ata9.15: hard resetting link >> [ 437.171811] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 437.172249] ata9.00: hard resetting link >> [ 447.156648] ata9.00: softreset failed (timeout) >> [ 450.149961] ata9.15: qc timeout (cmd 0xe4) >> [ 450.149979] ata9.00: failed to read SCR 0 (Emask=0x5) >> [ 450.149985] ata9.00: reset failed, giving up >> [ 450.149992] ata9.15: hard resetting link >> [ 452.277364] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 452.277711] ata9.00: hard resetting link >> [ 462.262159] ata9.00: softreset failed (timeout) >> [ 465.255619] ata9.15: qc timeout (cmd 0xe4) >> [ 465.255635] ata9.00: failed to read SCR 0 (Emask=0x5) >> [ 465.255639] ata9.00: reset failed, giving up >> [ 465.255643] ata9.00: failed to recover link after 3 tries, disabling >> [ 465.255648] ata9.15: hard resetting link >> [ 467.382834] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 467.688287] ata9.01: hard resetting link >> [ 468.091305] ata9.01: link resume succeeded after 1 retries >> [ 468.226246] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 468.226301] ata9.02: hard resetting link >> [ 468.629118] ata9.02: link resume succeeded after 1 retries >> [ 468.764014] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 468.764047] ata9.03: hard resetting link >> [ 469.166941] ata9.03: link resume succeeded after 1 retries >> [ 469.301843] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 469.301877] ata9.04: hard resetting link >> [ 469.704728] ata9.04: link resume succeeded after 1 retries >> [ 469.927155] ata9.04: softreset failed (SRST command error) >> [ 469.927269] ata9.04: failed to read SCR 0 (Emask=0x1) >> [ 469.927275] ata9.04: reset failed (errno=-85), retrying in 10 secs >> [ 479.279534] ata9.04: reset failed, giving up >> [ 479.279540] ata9.15: hard resetting link >> [ 479.279544] ata9: controller in dubious state, performing PORT_RST >> [ 481.428685] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 481.733166] ata9.01: hard resetting link >> [ 482.136168] ata9.01: link resume succeeded after 1 retries >> [ 482.271032] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 482.271066] ata9.02: hard resetting link >> [ 482.673977] ata9.02: link resume succeeded after 1 retries >> [ 482.808905] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 482.808938] ata9.03: hard resetting link >> [ 483.211797] ata9.03: link resume succeeded after 1 retries >> [ 483.346679] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 483.346735] ata9.04: hard resetting link >> [ 483.749592] ata9.04: link resume succeeded after 1 retries >> [ 483.862225] ata9.04: softreset failed (SRST command error) >> [ 483.862301] ata9.04: failed to read SCR 0 (Emask=0x1) >> [ 483.862306] ata9.04: reset failed (errno=-85), retrying in 10 secs >> [ 493.324567] ata9.04: reset failed, giving up >> [ 493.324574] ata9.15: hard resetting link >> [ 495.440632] ata9.15: softreset failed (SRST command error) >> [ 495.440638] ata9.15: reset failed (errno=-5), retrying in 8 secs >> [ 503.302208] ata9.15: hard resetting link >> [ 505.418541] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 505.418549] ata9.15: PMP revalidation failed (errno=-19) >> [ 510.407473] ata9.15: hard resetting link >> [ 512.534721] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 512.839192] ata9.01: hard resetting link >> [ 513.242191] ata9.01: link resume succeeded after 1 retries >> [ 513.377113] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 513.377168] ata9.02: hard resetting link >> [ 513.779948] ata9.02: link resume succeeded after 1 retries >> [ 513.914918] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 513.914951] ata9.03: hard resetting link >> [ 514.317810] ata9.03: link resume succeeded after 1 retries >> [ 514.452725] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 514.452759] ata9.04: hard resetting link >> [ 514.855616] ata9.04: link resume succeeded after 1 retries >> [ 514.968324] ata9.04: softreset failed (SRST command error) >> [ 515.078062] ata9.04: failed to read SCR 0 (Emask=0x1) >> [ 515.078068] ata9.04: reset failed (errno=-85), retrying in 10 secs >> [ 524.430341] ata9.04: reset failed, giving up >> [ 524.430346] ata9.04: failed to recover link after 3 tries, disabling >> [ 524.430352] ata9.15: hard resetting link >> [ 524.430355] ata9: controller in dubious state, performing PORT_RST >> [ 526.579506] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 527.287026] ata9.04: link resume succeeded after 1 retries >> [ 527.388982] ata9.01: hard resetting link >> [ 527.791958] ata9.01: link resume succeeded after 1 retries >> [ 527.926873] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 527.926906] ata9.02: hard resetting link >> [ 528.329747] ata9.02: link resume succeeded after 1 retries >> [ 528.464667] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 528.464723] ata9.03: hard resetting link >> [ 528.867555] ata9.03: link resume succeeded after 1 retries >> [ 529.002500] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 529.002537] ata9.05: hard resetting link >> [ 529.306850] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 529.349846] ata9.01: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 529.349852] ata9.01: 625142448 sectors, multi 0: LBA48 >> [ 529.349858] ata9.01: applying bridge limits >> [ 529.407928] ata9.01: configured for UDMA/100 >> [ 529.454790] ata9.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 529.454796] ata9.02: 625142448 sectors, multi 0: LBA48 >> [ 529.454802] ata9.02: applying bridge limits >> [ 529.512845] ata9.02: configured for UDMA/100 >> [ 529.557037] ata9.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 529.557043] ata9.03: 625142448 sectors, multi 0: LBA48 >> [ 529.557049] ata9.03: applying bridge limits >> [ 529.615208] ata9.03: configured for UDMA/100 >> [ 529.615276] ata9: EH complete >> [ 531.745132] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 531.745518] ata10.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 531.748378] ata10.00: hard resetting link >> [ 541.732981] ata10.00: softreset failed (timeout) >> [ 544.726484] ata10.15: qc timeout (cmd 0xe4) >> [ 544.726500] ata10.00: failed to read SCR 0 (Emask=0x5) >> [ 544.726504] ata10.00: reset failed, giving up >> [ 544.726509] ata10.15: hard resetting link >> [ 546.853639] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 546.854296] ata10.00: hard resetting link >> [ 556.839495] ata10.00: softreset failed (timeout) >> [ 559.832859] ata10.15: qc timeout (cmd 0xe4) >> [ 559.832875] ata10.00: failed to read SCR 0 (Emask=0x5) >> [ 559.832879] ata10.00: reset failed, giving up >> [ 559.832884] ata10.15: hard resetting link >> [ 561.960149] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 561.960603] ata10.00: hard resetting link >> [ 571.944967] ata10.00: softreset failed (timeout) >> [ 574.938480] ata10.15: qc timeout (cmd 0xe4) >> [ 574.938496] ata10.00: failed to read SCR 0 (Emask=0x5) >> [ 574.938500] ata10.00: reset failed, giving up >> [ 574.938504] ata10.00: failed to recover link after 3 tries, disabling >> [ 574.938509] ata10.15: hard resetting link >> [ 577.065685] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 577.370126] ata10.01: hard resetting link >> [ 577.773138] ata10.01: link resume succeeded after 1 retries >> [ 577.908044] ata10.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 577.908100] ata10.02: hard resetting link >> [ 578.310944] ata10.02: link resume succeeded after 1 retries >> [ 578.445975] ata10.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 578.446011] ata10.03: hard resetting link >> [ 578.848752] ata10.03: link resume succeeded after 1 retries >> [ 578.983663] ata10.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 578.983696] ata10.04: hard resetting link >> [ 579.386604] ata10.04: link resume succeeded after 1 retries >> [ 579.521504] ata10.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 579.521537] ata10.05: hard resetting link >> [ 579.825806] ata10.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 579.867413] ata10.01: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 579.867419] ata10.01: 625142448 sectors, multi 0: LBA48 >> [ 579.925564] ata10.01: configured for UDMA/100 >> [ 579.976084] ata10.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 579.976093] ata10.02: 625142448 sectors, multi 0: LBA48 >> [ 580.034256] ata10.02: configured for UDMA/100 >> [ 580.079872] ata10.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 580.079880] ata10.03: 625142448 sectors, multi 0: LBA48 >> [ 580.138089] ata10.03: configured for UDMA/100 >> [ 580.181012] ata10.04: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 580.181018] ata10.04: 625142448 sectors, multi 0: LBA48 >> [ 580.238994] ata10.04: configured for UDMA/100 >> [ 580.239060] ata10: EH complete > : >> [ 673.269722] systemd[1]: Startup finished in 2s 215ms 631us (kernel) + 9min 41s 253ms 808us (initrd) + 1min 31s 95ms 965us (userspace) = 11min 14s 565ms 404us. > -------- > > --- 3.2.10 warm reset log ( not patched ) --- > : >> [ 0.000000] Linux version 3.2.10-3.fc16.i686.PAE (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 15 20:37:01 UTC 2012 > : >> [ 2.728305] ata7: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff0000 irq 17 >> [ 2.728309] ata8: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff2000 irq 17 >> [ 2.728313] ata9: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff4000 irq 17 >> [ 2.728317] ata10: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff6000 irq 17 > : >> [ 4.857114] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 4.857429] ata7.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 4.860366] ata7.00: hard resetting link >> [ 14.847053] ata7.00: softreset failed (timeout) >> [ 17.840588] ata7.15: qc timeout (cmd 0xe4) >> [ 17.840605] ata7.00: failed to read SCR 0 (Emask=0x5) >> [ 17.840609] ata7.00: reset failed, giving up >> [ 17.840614] ata7.15: hard resetting link >> [ 19.967586] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 19.967961] ata7.00: hard resetting link >> [ 29.952563] ata7.00: softreset failed (timeout) >> [ 32.946005] ata7.15: qc timeout (cmd 0xe4) >> [ 32.946021] ata7.00: failed to read SCR 0 (Emask=0x5) >> [ 32.946025] ata7.00: reset failed, giving up >> [ 32.946030] ata7.15: hard resetting link >> [ 35.073261] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 35.073643] ata7.00: hard resetting link >> [ 45.058071] ata7.00: softreset failed (timeout) >> [ 48.051483] ata7.15: qc timeout (cmd 0xe4) >> [ 48.051499] ata7.00: failed to read SCR 0 (Emask=0x5) >> [ 48.051503] ata7.00: reset failed, giving up >> [ 48.051507] ata7.00: failed to recover link after 3 tries, disabling >> [ 48.051512] ata7.15: hard resetting link >> [ 50.178736] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 50.483203] ata7.01: hard resetting link >> [ 50.886209] ata7.01: link resume succeeded after 1 retries >> [ 51.108651] ata7.01: softreset failed (SRST command error) >> [ 51.108762] ata7.01: failed to read SCR 0 (Emask=0x1) >> [ 51.108768] ata7.01: reset failed (errno=-85), retrying in 10 secs >> [ 60.460919] ata7.01: reset failed, giving up >> [ 60.460925] ata7.15: hard resetting link >> [ 60.460929] ata7: controller in dubious state, performing PORT_RST >> [ 62.610196] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 62.914676] ata7.01: hard resetting link >> [ 63.317656] ata7.01: link resume succeeded after 1 retries >> [ 63.540078] ata7.01: softreset failed (SRST command error) >> [ 63.540189] ata7.01: failed to read SCR 0 (Emask=0x1) >> [ 63.540195] ata7.01: reset failed (errno=-85), retrying in 10 secs >> [ 72.892375] ata7.01: reset failed, giving up >> [ 72.892381] ata7.15: hard resetting link >> [ 72.892385] ata7: controller in dubious state, performing PORT_RST >> [ 75.041637] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 75.346105] ata7.01: hard resetting link >> [ 75.749094] ata7.01: link resume succeeded after 1 retries >> [ 75.861794] ata7.01: softreset failed (SRST command error) >> [ 75.971535] ata7.01: failed to read SCR 0 (Emask=0x1) >> [ 75.971541] ata7.01: reset failed (errno=-85), retrying in 10 secs >> [ 85.323801] ata7.01: reset failed, giving up >> [ 85.323806] ata7.01: failed to recover link after 3 tries, disabling >> [ 85.323812] ata7.15: hard resetting link >> [ 85.323815] ata7: controller in dubious state, performing PORT_RST >> [ 87.473057] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 88.180573] ata7.01: link resume succeeded after 1 retries >> [ 88.282411] ata7.02: hard resetting link >> [ 88.685408] ata7.02: link resume succeeded after 1 retries >> [ 88.907856] ata7.02: softreset failed (SRST command error) >> [ 89.017611] ata7.02: failed to read SCR 0 (Emask=0x1) >> [ 89.017617] ata7.02: reset failed (errno=-85), retrying in 10 secs >> [ 98.260156] ata7.02: reset failed, giving up >> [ 98.260162] ata7.15: hard resetting link >> [ 98.260166] ata7: controller in dubious state, performing PORT_RST >> [ 100.409394] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 101.116820] ata7.01: link resume succeeded after 1 retries >> [ 101.218781] ata7.02: hard resetting link >> [ 101.621721] ata7.02: link resume succeeded after 1 retries >> [ 101.734438] ata7.02: softreset failed (SRST command error) >> [ 101.734497] ata7.02: failed to read SCR 0 (Emask=0x1) >> [ 101.734503] ata7.02: reset failed (errno=-85), retrying in 10 secs >> [ 111.196658] ata7.02: reset failed, giving up >> [ 111.196665] ata7.15: hard resetting link >> [ 113.312791] ata7.15: softreset failed (SRST command error) >> [ 113.312796] ata7.15: reset failed (errno=-5), retrying in 8 secs >> [ 121.174424] ata7.15: hard resetting link >> [ 123.290728] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 123.290735] ata7.15: PMP revalidation failed (errno=-19) >> [ 128.279611] ata7.15: hard resetting link >> [ 130.406891] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 131.114346] ata7.01: link resume succeeded after 1 retries >> [ 131.216223] ata7.02: hard resetting link >> [ 131.619242] ata7.02: link resume succeeded after 1 retries >> [ 131.841674] ata7.02: softreset failed (SRST command error) >> [ 131.841789] ata7.02: failed to read SCR 0 (Emask=0x1) >> [ 131.841795] ata7.02: reset failed (errno=-85), retrying in 10 secs >> [ 141.194111] ata7.02: reset failed, giving up >> [ 141.194116] ata7.02: failed to recover link after 3 tries, disabling >> [ 141.194122] ata7.15: hard resetting link >> [ 141.194126] ata7: controller in dubious state, performing PORT_RST >> [ 143.343218] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 144.050671] ata7.01: link resume succeeded after 1 retries >> [ 144.555590] ata7.02: link resume succeeded after 1 retries >> [ 144.657379] ata7.03: hard resetting link >> [ 145.060433] ata7.03: link resume succeeded after 1 retries >> [ 145.206413] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 145.206446] ata7.04: hard resetting link >> [ 145.609232] ata7.04: link resume succeeded after 1 retries >> [ 145.721921] ata7.04: softreset failed (SRST command error) >> [ 145.721997] ata7.04: failed to read SCR 0 (Emask=0x1) >> [ 145.722003] ata7.04: reset failed (errno=-85), retrying in 10 secs >> [ 155.184070] ata7.04: reset failed, giving up >> [ 155.184076] ata7.15: hard resetting link >> [ 157.300201] ata7.15: softreset failed (SRST command error) >> [ 157.300206] ata7.15: reset failed (errno=-5), retrying in 8 secs >> [ 165.161929] ata7.15: hard resetting link >> [ 167.278086] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 167.278094] ata7.15: PMP revalidation failed (errno=-19) >> [ 172.267085] ata7.15: hard resetting link >> [ 174.394357] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 175.101835] ata7.01: link resume succeeded after 1 retries >> [ 175.606735] ata7.02: link resume succeeded after 1 retries >> [ 175.708593] ata7.03: hard resetting link >> [ 176.111610] ata7.03: link resume succeeded after 1 retries >> [ 176.257481] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 176.257514] ata7.04: hard resetting link >> [ 176.660366] ata7.04: link resume succeeded after 1 retries >> [ 176.882825] ata7.04: softreset failed (SRST command error) >> [ 176.882943] ata7.04: failed to read SCR 0 (Emask=0x1) >> [ 176.882948] ata7.04: reset failed (errno=-85), retrying in 10 secs >> [ 186.235215] ata7.04: reset failed, giving up >> [ 186.235221] ata7.15: hard resetting link >> [ 186.235225] ata7: controller in dubious state, performing PORT_RST >> [ 188.384387] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 189.091824] ata7.01: link resume succeeded after 1 retries >> [ 189.596721] ata7.02: link resume succeeded after 1 retries >> [ 189.698575] ata7.03: hard resetting link >> [ 190.101579] ata7.03: link resume succeeded after 1 retries >> [ 190.236540] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 190.236573] ata7.04: hard resetting link >> [ 190.639411] ata7.04: link resume succeeded after 1 retries >> [ 190.861835] ata7.04: softreset failed (SRST command error) >> [ 190.861952] ata7.04: failed to read SCR 0 (Emask=0x1) >> [ 190.861958] ata7.04: reset failed (errno=-85), retrying in 10 secs >> [ 200.214230] ata7.04: reset failed, giving up >> [ 200.214235] ata7.04: failed to recover link after 3 tries, disabling >> [ 200.214241] ata7.15: hard resetting link >> [ 200.214245] ata7: controller in dubious state, performing PORT_RST >> [ 202.363386] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 203.070830] ata7.01: link resume succeeded after 1 retries >> [ 203.575726] ata7.02: link resume succeeded after 1 retries >> [ 204.080613] ata7.04: link resume succeeded after 1 retries >> [ 204.182486] ata7.03: hard resetting link >> [ 204.585489] ata7.03: link resume succeeded after 1 retries >> [ 204.731415] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 204.731470] ata7.05: hard resetting link >> [ 205.035777] ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 205.048761] ata7.03: ATA-7: WDC WD2500BB-22RDA0, 20.00K20, max UDMA/100 >> [ 205.048767] ata7.03: 488397168 sectors, multi 0: LBA48 >> [ 205.050024] ata7.03: configured for UDMA/100 >> [ 205.050091] ata7: EH complete >> [ 207.178745] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 207.179371] ata8.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 207.182429] ata8.00: hard resetting link >> [ 217.168525] ata8.00: softreset failed (timeout) >> [ 220.161929] ata8.15: qc timeout (cmd 0xe4) >> [ 220.161945] ata8.00: failed to read SCR 0 (Emask=0x5) >> [ 220.161949] ata8.00: reset failed, giving up >> [ 220.161954] ata8.15: hard resetting link >> [ 222.289193] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 222.289669] ata8.00: hard resetting link >> [ 232.274042] ata8.00: softreset failed (timeout) >> [ 235.267413] ata8.15: qc timeout (cmd 0xe4) >> [ 235.267430] ata8.00: failed to read SCR 0 (Emask=0x5) >> [ 235.267434] ata8.00: reset failed, giving up >> [ 235.267439] ata8.15: hard resetting link >> [ 237.394721] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 237.395117] ata8.00: hard resetting link >> [ 247.381547] ata8.00: softreset failed (timeout) >> [ 250.375186] ata8.15: qc timeout (cmd 0xe4) >> [ 250.375202] ata8.00: failed to read SCR 0 (Emask=0x5) >> [ 250.375206] ata8.00: reset failed, giving up >> [ 250.375210] ata8.00: failed to recover link after 3 tries, disabling >> [ 250.375215] ata8.15: hard resetting link >> [ 252.502205] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 252.806698] ata8.01: hard resetting link >> [ 253.209687] ata8.01: link resume succeeded after 1 retries >> [ 253.322366] ata8.01: softreset failed (SRST command error) >> [ 253.432126] ata8.01: failed to read SCR 0 (Emask=0x1) >> [ 253.432132] ata8.01: reset failed (errno=-85), retrying in 10 secs >> [ 262.784386] ata8.01: reset failed, giving up >> [ 262.784393] ata8.15: hard resetting link >> [ 262.784396] ata8: controller in dubious state, performing PORT_RST >> [ 264.933544] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 265.238130] ata8.01: hard resetting link >> [ 265.641134] ata8.01: link resume succeeded after 1 retries >> [ 265.863530] ata8.01: softreset failed (SRST command error) >> [ 265.863649] ata8.01: failed to read SCR 0 (Emask=0x1) >> [ 265.863656] ata8.01: reset failed (errno=-85), retrying in 10 secs >> [ 275.215940] ata8.01: reset failed, giving up >> [ 275.215947] ata8.15: hard resetting link >> [ 275.215950] ata8: controller in dubious state, performing PORT_RST >> [ 277.365109] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 277.669544] ata8.01: hard resetting link >> [ 278.072561] ata8.01: link resume succeeded after 1 retries >> [ 278.185268] ata8.01: softreset failed (SRST command error) >> [ 278.185345] ata8.01: failed to read SCR 0 (Emask=0x1) >> [ 278.185350] ata8.01: reset failed (errno=-85), retrying in 10 secs >> [ 287.647375] ata8.01: reset failed, giving up >> [ 287.647380] ata8.01: failed to recover link after 3 tries, disabling >> [ 287.647386] ata8.15: hard resetting link >> [ 289.763635] ata8.15: softreset failed (SRST command error) >> [ 289.763641] ata8.15: reset failed (errno=-5), retrying in 8 secs >> [ 297.625370] ata8.15: hard resetting link >> [ 299.741510] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 299.741517] ata8.15: PMP revalidation failed (errno=-19) >> [ 304.730436] ata8.15: hard resetting link >> [ 306.857730] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 307.565198] ata8.01: link resume succeeded after 1 retries >> [ 307.667104] ata8.02: hard resetting link >> [ 308.070064] ata8.02: link resume succeeded after 1 retries >> [ 308.204919] ata8.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 308.204959] ata8.03: hard resetting link >> [ 308.607881] ata8.03: link resume succeeded after 1 retries >> [ 308.742869] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 308.742925] ata8.04: hard resetting link >> [ 309.167567] ata8.04: softreset failed (SRST command error) >> [ 309.167683] ata8.04: failed to read SCR 0 (Emask=0x1) >> [ 309.167689] ata8.04: reset failed (errno=-85), retrying in 10 secs >> [ 318.720492] ata8.04: reset failed, giving up >> [ 318.720498] ata8.15: hard resetting link >> [ 318.720502] ata8: controller in dubious state, performing PORT_RST >> [ 320.869657] ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 321.577152] ata8.01: link resume succeeded after 1 retries >> [ 321.679005] ata8.02: hard resetting link >> [ 322.081996] ata8.02: link resume succeeded after 1 retries >> [ 322.216966] ata8.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 322.216999] ata8.03: hard resetting link >> [ 322.619825] ata8.03: link resume succeeded after 1 retries >> [ 322.754896] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 322.754930] ata8.04: hard resetting link >> [ 323.157612] ata8.04: link resume succeeded after 1 retries >> [ 323.292583] ata8.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 323.292616] ata8.05: hard resetting link >> [ 323.596925] ata8.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 323.640767] ata8.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 323.640773] ata8.02: 625142448 sectors, multi 0: LBA48 >> [ 323.640779] ata8.02: applying bridge limits >> [ 323.698858] ata8.02: configured for UDMA/100 >> [ 323.745674] ata8.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 323.745680] ata8.03: 625142448 sectors, multi 0: LBA48 >> [ 323.803639] ata8.03: configured for UDMA/100 >> [ 323.842716] ata8.04: ATA-7: ST3320620A, 3.AAC, max UDMA/100 >> [ 323.842722] ata8.04: 625142448 sectors, multi 0: LBA48 >> [ 323.900831] ata8.04: configured for UDMA/100 >> [ 323.900899] ata8: EH complete >> [ 326.030208] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 326.030699] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 326.033845] ata9.00: hard resetting link >> [ 336.019051] ata9.00: softreset failed (timeout) >> [ 339.012488] ata9.15: qc timeout (cmd 0xe4) >> [ 339.012504] ata9.00: failed to read SCR 0 (Emask=0x5) >> [ 339.012508] ata9.00: reset failed, giving up >> [ 339.012513] ata9.15: hard resetting link >> [ 341.139699] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 341.140064] ata9.00: hard resetting link >> [ 351.124563] ata9.00: softreset failed (timeout) >> [ 354.117970] ata9.15: qc timeout (cmd 0xe4) >> [ 354.117986] ata9.00: failed to read SCR 0 (Emask=0x5) >> [ 354.117991] ata9.00: reset failed, giving up >> [ 354.117995] ata9.15: hard resetting link >> [ 356.245238] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 356.245646] ata9.00: hard resetting link >> [ 366.232072] ata9.00: softreset failed (timeout) >> [ 369.225622] ata9.15: qc timeout (cmd 0xe4) >> [ 369.225639] ata9.00: failed to read SCR 0 (Emask=0x5) >> [ 369.225643] ata9.00: reset failed, giving up >> [ 369.225646] ata9.00: failed to recover link after 3 tries, disabling >> [ 369.225651] ata9.15: hard resetting link >> [ 371.352723] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 371.658238] ata9.01: hard resetting link >> [ 372.061197] ata9.01: link resume succeeded after 1 retries >> [ 372.196197] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 372.196231] ata9.02: hard resetting link >> [ 372.599024] ata9.02: link resume succeeded after 1 retries >> [ 372.734004] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 372.734059] ata9.03: hard resetting link >> [ 373.136813] ata9.03: link resume succeeded after 1 retries >> [ 373.271772] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 373.271991] ata9.04: hard resetting link >> [ 373.674613] ata9.04: link resume succeeded after 1 retries >> [ 373.897067] ata9.04: softreset failed (SRST command error) >> [ 373.897181] ata9.04: failed to read SCR 0 (Emask=0x1) >> [ 373.897186] ata9.04: reset failed (errno=-85), retrying in 10 secs >> [ 383.249478] ata9.04: reset failed, giving up >> [ 383.249485] ata9.15: hard resetting link >> [ 383.249488] ata9: controller in dubious state, performing PORT_RST >> [ 385.398590] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 385.703106] ata9.01: hard resetting link >> [ 386.106062] ata9.01: link resume succeeded after 1 retries >> [ 386.241016] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 386.241049] ata9.02: hard resetting link >> [ 386.643858] ata9.02: link resume succeeded after 1 retries >> [ 386.778833] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 386.778867] ata9.03: hard resetting link >> [ 387.181678] ata9.03: link resume succeeded after 1 retries >> [ 387.316679] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 387.316712] ata9.04: hard resetting link >> [ 387.719469] ata9.04: link resume succeeded after 1 retries >> [ 387.941933] ata9.04: softreset failed (SRST command error) >> [ 388.051691] ata9.04: failed to read SCR 0 (Emask=0x1) >> [ 388.051697] ata9.04: reset failed (errno=-85), retrying in 10 secs >> [ 397.294204] ata9.04: reset failed, giving up >> [ 397.294211] ata9.15: hard resetting link >> [ 397.294215] ata9: controller in dubious state, performing PORT_RST >> [ 399.443466] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 399.748924] ata9.01: hard resetting link >> [ 400.151923] ata9.01: link resume succeeded after 1 retries >> [ 400.286954] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 400.287009] ata9.02: hard resetting link >> [ 400.602829] ata9.02: softreset failed (SRST command error) >> [ 400.602873] ata9.02: failed to read SCR 0 (Emask=0x1) >> [ 400.602878] ata9.02: reset failed (errno=-85), retrying in 10 secs >> [ 410.264596] ata9.02: reset failed, giving up >> [ 410.264602] ata9.15: hard resetting link >> [ 412.380787] ata9.15: softreset failed (SRST command error) >> [ 412.380793] ata9.15: reset failed (errno=-5), retrying in 8 secs >> [ 420.242419] ata9.15: hard resetting link >> [ 422.358667] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 422.358674] ata9.15: PMP revalidation failed (errno=-19) >> [ 427.347591] ata9.15: hard resetting link >> [ 429.474906] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 429.779395] ata9.01: hard resetting link >> [ 430.182351] ata9.01: link resume succeeded after 1 retries >> [ 430.317296] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 430.317351] ata9.02: hard resetting link >> [ 430.720197] ata9.02: link resume succeeded after 1 retries >> [ 430.855159] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 430.855193] ata9.03: hard resetting link >> [ 431.257981] ata9.03: link resume succeeded after 1 retries >> [ 431.392905] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 431.392939] ata9.04: hard resetting link >> [ 431.795778] ata9.04: link resume succeeded after 1 retries >> [ 432.018221] ata9.04: softreset failed (SRST command error) >> [ 432.127979] ata9.04: failed to read SCR 0 (Emask=0x1) >> [ 432.127985] ata9.04: reset failed (errno=-85), retrying in 10 secs >> [ 441.370492] ata9.04: reset failed, giving up >> [ 441.370497] ata9.04: failed to recover link after 3 tries, disabling >> [ 441.370503] ata9.15: hard resetting link >> [ 441.370506] ata9: controller in dubious state, performing PORT_RST >> [ 443.519744] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 444.228219] ata9.04: link resume succeeded after 1 retries >> [ 444.330047] ata9.01: hard resetting link >> [ 444.733074] ata9.01: link resume succeeded after 1 retries >> [ 444.868066] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 444.868100] ata9.02: hard resetting link >> [ 445.270895] ata9.02: link resume succeeded after 1 retries >> [ 445.405825] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 445.405858] ata9.03: hard resetting link >> [ 445.808708] ata9.03: link resume succeeded after 1 retries >> [ 445.943636] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 445.943670] ata9.05: hard resetting link >> [ 446.247941] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 446.296913] ata9.01: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 446.296919] ata9.01: 625142448 sectors, multi 0: LBA48 >> [ 446.296925] ata9.01: applying bridge limits >> [ 446.355077] ata9.01: configured for UDMA/100 >> [ 446.395040] ata9.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 446.395046] ata9.02: 625142448 sectors, multi 0: LBA48 >> [ 446.395052] ata9.02: applying bridge limits >> [ 446.452939] ata9.02: configured for UDMA/100 >> [ 446.495345] ata9.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 446.495351] ata9.03: 625142448 sectors, multi 0: LBA48 >> [ 446.495357] ata9.03: applying bridge limits >> [ 446.553517] ata9.03: configured for UDMA/100 >> [ 446.553584] ata9: EH complete >> [ 448.683166] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 448.683486] ata10.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 448.687214] ata10.00: hard resetting link >> [ 458.672134] ata10.00: softreset failed (timeout) >> [ 461.665544] ata10.15: qc timeout (cmd 0xe4) >> [ 461.665560] ata10.00: failed to read SCR 0 (Emask=0x5) >> [ 461.665564] ata10.00: reset failed, giving up >> [ 461.665569] ata10.15: hard resetting link >> [ 463.792817] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 463.793226] ata10.00: hard resetting link >> [ 473.777653] ata10.00: softreset failed (timeout) >> [ 476.771082] ata10.15: qc timeout (cmd 0xe4) >> [ 476.771098] ata10.00: failed to read SCR 0 (Emask=0x5) >> [ 476.771103] ata10.00: reset failed, giving up >> [ 476.771107] ata10.15: hard resetting link >> [ 478.899314] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 478.899908] ata10.00: hard resetting link >> [ 488.887138] ata10.00: softreset failed (timeout) >> [ 491.880576] ata10.15: qc timeout (cmd 0xe4) >> [ 491.880592] ata10.00: failed to read SCR 0 (Emask=0x5) >> [ 491.880596] ata10.00: reset failed, giving up >> [ 491.880600] ata10.00: failed to recover link after 3 tries, disabling >> [ 491.880605] ata10.15: hard resetting link >> [ 494.007817] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 494.312333] ata10.01: hard resetting link >> [ 494.715272] ata10.01: link resume succeeded after 1 retries >> [ 494.850280] ata10.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 494.850313] ata10.02: hard resetting link >> [ 495.253111] ata10.02: link resume succeeded after 1 retries >> [ 495.388016] ata10.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 495.388049] ata10.03: hard resetting link >> [ 495.790830] ata10.03: link resume succeeded after 1 retries >> [ 495.925873] ata10.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 495.925907] ata10.04: hard resetting link >> [ 496.328734] ata10.04: link resume succeeded after 1 retries >> [ 496.463716] ata10.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 496.463771] ata10.05: hard resetting link >> [ 496.768009] ata10.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 496.807384] ata10.01: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 496.807390] ata10.01: 625142448 sectors, multi 0: LBA48 >> [ 496.865535] ata10.01: configured for UDMA/100 >> [ 496.906478] ata10.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 496.906484] ata10.02: 625142448 sectors, multi 0: LBA48 >> [ 496.964626] ata10.02: configured for UDMA/100 >> [ 497.006300] ata10.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 497.006306] ata10.03: 625142448 sectors, multi 0: LBA48 >> [ 497.072809] ata10.03: configured for UDMA/100 >> [ 497.114788] ata10.04: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 497.114794] ata10.04: 625142448 sectors, multi 0: LBA48 >> [ 497.181051] ata10.04: configured for UDMA/100 >> [ 497.181118] ata10: EH complete > : >> [ 590.217860] systemd[1]: Startup finished in 2s 202ms 781us (kernel) + 8min 18s 52ms 150us (initrd) + 1min 31s 63ms 470us (userspace) = 9min 51s 318ms 401us. > -------- > > --- 3.2.10 power cycle log ( patch is applied ) --- > : >> [ 0.000000] Linux version 3.2.10-3.aa.fc16.i686.PAE (anezaki@server4) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 22 08:14:54 JST 2012 > : >> [ 2.729562] ata7: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff0000 irq 17 >> [ 2.729566] ata8: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff2000 irq 17 >> [ 2.729570] ata9: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff4000 irq 17 >> [ 2.729573] ata10: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff6000 irq 17 > : >> [ 4.856167] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 4.856555] ata7.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 4.860371] ata7.00: hard resetting link >> [ 5.164779] ata7.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 5.164812] ata7.01: hard resetting link >> [ 5.567672] ata7.01: link resume succeeded after 1 retries >> [ 5.669657] ata7.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 5.669687] ata7.02: hard resetting link >> [ 6.072522] ata7.02: link resume succeeded after 1 retries >> [ 6.174570] ata7.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 6.174601] ata7.03: hard resetting link >> [ 6.577435] ata7.03: link resume succeeded after 1 retries >> [ 6.679594] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 6.679625] ata7.04: hard resetting link >> [ 7.082306] ata7.04: link resume succeeded after 1 retries >> [ 7.184388] ata7.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 7.184419] ata7.05: hard resetting link >> [ 7.488718] ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 7.534065] ata7.00: ATA-7: ST3320620A, 3.AAC, max UDMA/100 >> [ 7.534071] ata7.00: 625142448 sectors, multi 0: LBA48 >> [ 7.534090] ata7.00: applying bridge limits >> [ 7.592213] ata7.00: configured for UDMA/100 >> [ 7.596737] ata7.01: ATA-6: WDC WD2500BB-55GUC0, 08.02D08, max UDMA/100 >> [ 7.596743] ata7.01: 488397168 sectors, multi 0: LBA48 >> [ 7.602618] ata7.01: configured for UDMA/100 >> [ 7.606381] ata7.02: ATA-7: Maxtor 7L250R0, BAJ41G20, max UDMA/133 >> [ 7.606387] ata7.02: 490234752 sectors, multi 0: LBA48 >> [ 7.606393] ata7.02: applying bridge limits >> [ 7.611626] ata7.02: configured for UDMA/100 >> [ 7.623764] ata7.03: ATA-7: WDC WD2500BB-22RDA0, 20.00K20, max UDMA/100 >> [ 7.623770] ata7.03: 488397168 sectors, multi 0: LBA48 >> [ 7.624811] ata7.03: configured for UDMA/100 >> [ 7.629200] ata7.04: ATA-6: WDC WD1600BB-55GUA0, 08.02D08, max UDMA/100 >> [ 7.629205] ata7.04: 312581808 sectors, multi 0: LBA48 >> [ 7.634917] ata7.04: configured for UDMA/100 >> [ 7.635002] ata7: EH complete >> [ 34.285986] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 34.286427] ata8.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 34.288785] ata8.00: hard resetting link >> [ 34.593587] ata8.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 34.593617] ata8.01: hard resetting link >> [ 34.996435] ata8.01: link resume succeeded after 1 retries >> [ 35.098512] ata8.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 35.098543] ata8.02: hard resetting link >> [ 35.501314] ata8.02: link resume succeeded after 1 retries >> [ 35.603259] ata8.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 35.603290] ata8.03: hard resetting link >> [ 36.006195] ata8.03: link resume succeeded after 1 retries >> [ 36.108256] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 36.108287] ata8.04: hard resetting link >> [ 36.412602] ata8.04: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 36.412632] ata8.05: hard resetting link >> [ 36.717004] ata8.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 36.762712] ata8.00: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 36.762719] ata8.00: 625142448 sectors, multi 0: LBA48 >> [ 36.845768] ata8.00: configured for UDMA/100 >> [ 36.849244] ata8.01: ATA-5: WDC WD1200AB-22CBA1, 04.07B04, max UDMA/100 >> [ 36.849250] ata8.01: 234441648 sectors, multi 0: LBA >> [ 36.849256] ata8.01: applying bridge limits >> [ 36.853680] ata8.01: configured for UDMA/100 >> [ 36.891680] ata8.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 36.891686] ata8.02: 625142448 sectors, multi 0: LBA48 >> [ 36.891692] ata8.02: applying bridge limits >> [ 36.949795] ata8.02: configured for UDMA/100 >> [ 36.987189] ata8.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 36.987195] ata8.03: 625142448 sectors, multi 0: LBA48 >> [ 37.045271] ata8.03: configured for UDMA/100 >> [ 37.085915] ata8.04: ATA-7: ST3320620A, 3.AAC, max UDMA/100 >> [ 37.085921] ata8.04: 625142448 sectors, multi 0: LBA48 >> [ 37.144042] ata8.04: configured for UDMA/100 >> [ 37.144107] ata8: EH complete >> [ 39.274927] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 39.275464] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 39.278021] ata9.00: hard resetting link >> [ 39.582515] ata9.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 39.582546] ata9.01: hard resetting link >> [ 39.985368] ata9.01: link resume succeeded after 1 retries >> [ 40.087368] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 40.087403] ata9.02: hard resetting link >> [ 40.490243] ata9.02: link resume succeeded after 1 retries >> [ 40.592245] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 40.592276] ata9.03: hard resetting link >> [ 40.995137] ata9.03: link resume succeeded after 1 retries >> [ 41.097150] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 41.097180] ata9.04: hard resetting link >> [ 41.500012] ata9.04: link resume succeeded after 1 retries >> [ 41.602003] ata9.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 41.602034] ata9.05: hard resetting link >> [ 41.906397] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 42.014200] ata9.00: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 42.014206] ata9.00: 625142448 sectors, multi 0: LBA48 >> [ 42.072324] ata9.00: configured for UDMA/100 >> [ 42.111485] ata9.01: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 42.111491] ata9.01: 625142448 sectors, multi 0: LBA48 >> [ 42.111497] ata9.01: applying bridge limits >> [ 42.169647] ata9.01: configured for UDMA/100 >> [ 42.218013] ata9.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 42.218019] ata9.02: 625142448 sectors, multi 0: LBA48 >> [ 42.218025] ata9.02: applying bridge limits >> [ 42.276087] ata9.02: configured for UDMA/100 >> [ 42.320248] ata9.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 42.320254] ata9.03: 625142448 sectors, multi 0: LBA48 >> [ 42.320260] ata9.03: applying bridge limits >> [ 42.378414] ata9.03: configured for UDMA/100 >> [ 42.379847] ata9.04: ATA-6: Maxtor 96147H6, ZAH814Y0, max UDMA/100 >> [ 42.379853] ata9.04: 120064896 sectors, multi 0: LBA >> [ 42.379858] ata9.04: applying bridge limits >> [ 42.381615] ata9.04: configured for UDMA/100 >> [ 42.381680] ata9: EH complete >> [ 44.512318] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 44.512925] ata10.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 44.515715] ata10.00: hard resetting link >> [ 44.819948] ata10.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 44.819979] ata10.01: hard resetting link >> [ 45.222761] ata10.01: link resume succeeded after 1 retries >> [ 45.324781] ata10.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 45.324812] ata10.02: hard resetting link >> [ 45.727639] ata10.02: link resume succeeded after 1 retries >> [ 45.829636] ata10.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 45.829666] ata10.03: hard resetting link >> [ 46.232522] ata10.03: link resume succeeded after 1 retries >> [ 46.334558] ata10.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 46.334589] ata10.04: hard resetting link >> [ 46.737368] ata10.04: link resume succeeded after 1 retries >> [ 46.839471] ata10.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 46.839501] ata10.05: hard resetting link >> [ 47.143791] ata10.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 47.248372] ata10.00: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 47.248378] ata10.00: 625142448 sectors, multi 0: LBA48 >> [ 47.306392] ata10.00: configured for UDMA/100 >> [ 47.353307] ata10.01: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 47.353313] ata10.01: 625142448 sectors, multi 0: LBA48 >> [ 47.411454] ata10.01: configured for UDMA/100 >> [ 47.456257] ata10.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 47.456263] ata10.02: 625142448 sectors, multi 0: LBA48 >> [ 47.514395] ata10.02: configured for UDMA/100 >> [ 47.553006] ata10.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 47.553012] ata10.03: 625142448 sectors, multi 0: LBA48 >> [ 47.611199] ata10.03: configured for UDMA/100 >> [ 47.652126] ata10.04: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 47.652132] ata10.04: 625142448 sectors, multi 0: LBA48 >> [ 47.710076] ata10.04: configured for UDMA/100 >> [ 47.710143] ata10: EH complete > : >> [ 68.114484] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory >> [ 68.129524] NFSD: starting 90-second grace period > : > -------- > > --- 3.2.10 warm reboot log ( patch is applied ) --- > : >> [ 0.000000] Linux version 3.2.10-3.aa.fc16.i686.PAE (anezaki@server4) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 22 08:14:54 JST 2012 > : >> [ 2.699127] ata7: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff0000 irq 17 >> [ 2.699131] ata8: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff2000 irq 17 >> [ 2.699135] ata9: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff4000 irq 17 >> [ 2.699139] ata10: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff6000 irq 17 > : >> [ 4.826250] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 4.826612] ata7.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 4.830596] ata7.00: hard resetting link >> [ 5.134832] ata7.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 5.134863] ata7.01: hard resetting link >> [ 5.537729] ata7.01: link resume succeeded after 1 retries >> [ 5.639812] ata7.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 5.639843] ata7.02: hard resetting link >> [ 6.042561] ata7.02: link resume succeeded after 1 retries >> [ 6.144687] ata7.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 6.144717] ata7.03: hard resetting link >> [ 6.547490] ata7.03: link resume succeeded after 1 retries >> [ 6.649674] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 6.649705] ata7.04: hard resetting link >> [ 7.052371] ata7.04: link resume succeeded after 1 retries >> [ 7.154419] ata7.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 7.154449] ata7.05: hard resetting link >> [ 7.458756] ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 7.503939] ata7.00: ATA-7: ST3320620A, 3.AAC, max UDMA/100 >> [ 7.503945] ata7.00: 625142448 sectors, multi 0: LBA48 >> [ 7.503951] ata7.00: applying bridge limits >> [ 7.562109] ata7.00: configured for UDMA/100 >> [ 7.783927] ata7.01: ATA-6: WDC WD2500BB-55GUC0, 08.02D08, max UDMA/100 >> [ 7.783934] ata7.01: 488397168 sectors, multi 0: LBA48 >> [ 7.789650] ata7.01: configured for UDMA/100 >> [ 7.793380] ata7.02: ATA-7: Maxtor 7L250R0, BAJ41G20, max UDMA/133 >> [ 7.793386] ata7.02: 490234752 sectors, multi 0: LBA48 >> [ 7.793392] ata7.02: applying bridge limits >> [ 7.798892] ata7.02: configured for UDMA/100 >> [ 7.811970] ata7.03: ATA-7: WDC WD2500BB-22RDA0, 20.00K20, max UDMA/100 >> [ 7.811976] ata7.03: 488397168 sectors, multi 0: LBA48 >> [ 7.813162] ata7.03: configured for UDMA/100 >> [ 7.817674] ata7.04: ATA-6: WDC WD1600BB-55GUA0, 08.02D08, max UDMA/100 >> [ 7.817680] ata7.04: 312581808 sectors, multi 0: LBA48 >> [ 7.823575] ata7.04: configured for UDMA/100 >> [ 7.823643] ata7: EH complete >> [ 13.041087] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 13.041499] ata8.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 13.044606] ata8.00: hard resetting link >> [ 13.348670] ata8.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 13.348701] ata8.01: hard resetting link >> [ 13.751514] ata8.01: link resume succeeded after 1 retries >> [ 13.853570] ata8.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 13.853602] ata8.02: hard resetting link >> [ 14.256455] ata8.02: link resume succeeded after 1 retries >> [ 14.358436] ata8.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 14.358467] ata8.03: hard resetting link >> [ 14.761281] ata8.03: link resume succeeded after 1 retries >> [ 14.863336] ata8.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 14.863367] ata8.04: hard resetting link >> [ 15.167619] ata8.04: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 15.167650] ata8.05: hard resetting link >> [ 15.471979] ata8.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 15.516626] ata8.00: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 15.516632] ata8.00: 625142448 sectors, multi 0: LBA48 >> [ 15.574797] ata8.00: configured for UDMA/100 >> [ 15.578265] ata8.01: ATA-5: WDC WD1200AB-22CBA1, 04.07B04, max UDMA/100 >> [ 15.578271] ata8.01: 234441648 sectors, multi 0: LBA >> [ 15.578277] ata8.01: applying bridge limits >> [ 15.582726] ata8.01: configured for UDMA/100 >> [ 15.628882] ata8.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 15.628888] ata8.02: 625142448 sectors, multi 0: LBA48 >> [ 15.628894] ata8.02: applying bridge limits >> [ 15.686967] ata8.02: configured for UDMA/100 >> [ 15.730640] ata8.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 15.730646] ata8.03: 625142448 sectors, multi 0: LBA48 >> [ 15.788720] ata8.03: configured for UDMA/100 >> [ 15.835469] ata8.04: ATA-7: ST3320620A, 3.AAC, max UDMA/100 >> [ 15.835475] ata8.04: 625142448 sectors, multi 0: LBA48 >> [ 15.893578] ata8.04: configured for UDMA/100 >> [ 15.893644] ata8: EH complete >> [ 18.024017] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 18.024436] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 18.026843] ata9.00: hard resetting link >> [ 18.331659] ata9.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 18.331690] ata9.01: hard resetting link >> [ 18.734523] ata9.01: link resume succeeded after 1 retries >> [ 18.836552] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 18.836583] ata9.02: hard resetting link >> [ 19.239387] ata9.02: link resume succeeded after 1 retries >> [ 19.341569] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 19.341600] ata9.03: hard resetting link >> [ 19.744289] ata9.03: link resume succeeded after 1 retries >> [ 19.846327] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 19.846359] ata9.04: hard resetting link >> [ 20.249125] ata9.04: link resume succeeded after 1 retries >> [ 20.351165] ata9.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 20.351196] ata9.05: hard resetting link >> [ 20.655534] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 20.697625] ata9.00: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 20.697631] ata9.00: 625142448 sectors, multi 0: LBA48 >> [ 20.755791] ata9.00: configured for UDMA/100 >> [ 20.803812] ata9.01: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 20.803820] ata9.01: 625142448 sectors, multi 0: LBA48 >> [ 20.803828] ata9.01: applying bridge limits >> [ 20.861999] ata9.01: configured for UDMA/100 >> [ 20.907473] ata9.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 20.907481] ata9.02: 625142448 sectors, multi 0: LBA48 >> [ 20.907489] ata9.02: applying bridge limits >> [ 20.965567] ata9.02: configured for UDMA/100 >> [ 21.009201] ata9.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 21.009208] ata9.03: 625142448 sectors, multi 0: LBA48 >> [ 21.009235] ata9.03: applying bridge limits >> [ 21.067373] ata9.03: configured for UDMA/100 >> [ 21.068864] ata9.04: ATA-6: Maxtor 96147H6, ZAH814Y0, max UDMA/100 >> [ 21.068870] ata9.04: 120064896 sectors, multi 0: LBA >> [ 21.068875] ata9.04: applying bridge limits >> [ 21.070684] ata9.04: configured for UDMA/100 >> [ 21.070764] ata9: EH complete >> [ 23.200571] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 0) >> [ 23.200949] ata10.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 >> [ 23.203737] ata10.00: hard resetting link >> [ 23.508163] ata10.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 23.508194] ata10.01: hard resetting link >> [ 23.911059] ata10.01: link resume succeeded after 1 retries >> [ 24.013053] ata10.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 24.013084] ata10.02: hard resetting link >> [ 24.415910] ata10.02: link resume succeeded after 1 retries >> [ 24.517980] ata10.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 24.518012] ata10.03: hard resetting link >> [ 24.920928] ata10.03: link resume succeeded after 1 retries >> [ 25.022770] ata10.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 25.022801] ata10.04: hard resetting link >> [ 25.425701] ata10.04: link resume succeeded after 1 retries >> [ 25.527681] ata10.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 25.527712] ata10.05: hard resetting link >> [ 25.832000] ata10.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) >> [ 25.879126] ata10.00: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 25.879132] ata10.00: 625142448 sectors, multi 0: LBA48 >> [ 25.937192] ata10.00: configured for UDMA/100 >> [ 25.978792] ata10.01: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 25.978798] ata10.01: 625142448 sectors, multi 0: LBA48 >> [ 26.036936] ata10.01: configured for UDMA/100 >> [ 26.077728] ata10.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 26.077734] ata10.02: 625142448 sectors, multi 0: LBA48 >> [ 26.136026] ata10.02: configured for UDMA/100 >> [ 26.183072] ata10.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 26.183078] ata10.03: 625142448 sectors, multi 0: LBA48 >> [ 26.241261] ata10.03: configured for UDMA/100 >> [ 26.279920] ata10.04: ATA-7: ST3320620A, 3.AAD, max UDMA/100 >> [ 26.279926] ata10.04: 625142448 sectors, multi 0: LBA48 >> [ 26.337727] ata10.04: configured for UDMA/100 >> [ 26.337793] ata10: EH complete > : >> [ 50.854018] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory >> [ 50.910997] NFSD: starting 90-second grace period > : > -------- > > Best Regards, > Akira -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
