On Fri, 2012-02-03 at 09:15 +0800, Lin Ming wrote: > On Thu, 2012-02-02 at 14:08 +0530, Srivatsa S. Bhat wrote: > > Adding some Cc's. > > > > On 02/02/2012 10:42 AM, Norbert Preining wrote: > > > > > Dear all, > > > > > > (please Cc) > > > > > > since going from 3.2 to 3.3-rc1 I see a kind of regression wrt booting > > > time, namely the detection of the CD drive hangs for 10sec (both > > > dmesg were taken on the same hardware on the same day): > > > > > > with 3.3-rc1 and rc2: > > > [ 3.694012] sd 0:0:0:0: [sda] Attached SCSI disk > > > [ 9.004013] ata2: link is slow to respond, please be patient (ready=0) > > > [ 13.652013] ata2: COMRESET failed (errno=-16) > > > [ 13.972022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > > I'm looking into this problem. > But I can't reproduce this regression. > > Could you attach the full 3.3-rc2 dmesg? And could you do a bisect? First, you can check if commit 318893e is good or bad. If it's bad, then you only need to do a bisect between v3.2 and 318893e. Otherwise, you need to do a bisect between v3.2 and v3.3-rc1. Thanks, Lin Ming -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
