Re: Regression 3.2 -> 3.3-rc1 10 sec hang at boot and resume, COMRESET failed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Adding some Cc's.

On 02/02/2012 10:42 AM, Norbert Preining wrote:

> Dear all,
> 
> (please Cc)
> 
> since going from 3.2 to 3.3-rc1 I see a kind of regression wrt booting
> time, namely the detection of the CD drive hangs for 10sec (both
> dmesg were taken on the same hardware on the same day):
> 
> with 3.3-rc1 and rc2:
> [    3.694012] sd 0:0:0:0: [sda] Attached SCSI disk
> [    9.004013] ata2: link is slow to respond, please be patient (ready=0)
> [   13.652013] ata2: COMRESET failed (errno=-16)
> [   13.972022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [   13.975721] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [   13.977166] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.21, max UDMA/33
> [   13.981294] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [   13.982734] ata2.00: configured for UDMA/33
> [   13.987964] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ862AS  1.21 PQ: 0 ANSI: 5
> [   13.991482] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> [   13.992971] cdrom: Uniform CD-ROM driver Revision: 3.20
> [   13.994574] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [   13.994672] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [   14.316021] ata5: SATA link down (SStatus 0 SControl 300)
> [   14.636019] ata6: SATA link down (SStatus 0 SControl 300)
> 
> with 3.2:
> [    3.218156] sd 0:0:0:0: [sda] Attached SCSI disk
> [    3.484023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [    3.487708] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [    3.489156] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.21, max UDMA/33
> [    3.494321] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [    3.495761] ata2.00: configured for UDMA/33
> [    3.501057] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ862AS  1.21 PQ: 0 ANSI: 5
> [    3.504515] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> [    3.505995] cdrom: Uniform CD-ROM driver Revision: 3.20
> [    3.507611] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [    3.507715] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [    3.828025] ata5: SATA link down (SStatus 0 SControl 300)
> [    4.148020] ata6: SATA link down (SStatus 0 SControl 300)
> 
> 
> Is there anything I can do here?
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux