Re: [PATCH v6 2/7] libsas: improve ata debug statements

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12-01-21 12:36 AM, Jack Wang wrote:


[Jack Wang]
Nice improvement.
Thanks.
It's difficult to determine which domain_device is triggering error
recovery,
so convert messages like:

   sas: ex 5001b4da000e703f phy08:T attached: 5001b4da000e7028
   sas: ex 5001b4da000e703f phy09:T attached: 5001b4da000e7029
   ...
   ata7: sas eh calling libata port error handler
   ata8: sas eh calling libata port error handler

...into:

   sas: ex 5001517e85cfefff phy05:T:9 attached: 5001517e85cfefe5 (stp)
   sas: ex 5001517e3b0af0bf phy11:T:8 attached: 5001517e3b0af0ab (stp)
   ...
   sas: ata7: end_device-21:1: dev error handler
   sas: ata8: end_device-20:0:5: dev error handler

which shows attached link rate, device type, and associates a
domain_device with its ata_port id to correlate messages emitted from
libata-eh.

A couple of comments. The "T" in the "phy08:T" stands for
an expander phy's routing attribute being "table" I presume.
In smp_utils I'm thinking of changing that to "U" in the case
where that expander (SAS-2 or later) supports table-to-table
routing. The "U" indicates that phy can join other (sibling)
expander phys to become an "enclosure universal port" which
is nirvana for SAS expanders.

enum sas_dev_type::EDGE_DEV seems a pretty bad name and
should be changed to EXPANDER_DEV as that is more
accurate. Where fanout expanders ever made in SAS-1?
Not many I would expect. In SAS-2++ (SPL, SPL-2) the
"edge" and "fanout" distinction has been dropped and
the numerical value for fanout expanders (3) has been
marked as obsolete.

Doug Gilbert

Signed-off-by: Dan Williams<dan.j.williams@xxxxxxxxx>
---
  drivers/scsi/libsas/sas_ata.c      |   43
++++++++++++++++++++++++++++--------
  drivers/scsi/libsas/sas_expander.c |   38
++++++++++++++++++++++++++------
  2 files changed, 64 insertions(+), 17 deletions(-)

diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 0ee6831..b43e395 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -317,6 +317,28 @@ static int local_ata_check_ready(struct ata_link
*link)
  	}
  }

+static int sas_ata_printk(const char *level, const struct domain_device
*ddev,
+		          const char *fmt, ...)
+{
+	struct ata_port *ap = ddev->sata_dev.ap;
+	struct device *dev =&ddev->rphy->dev;
+	struct va_format vaf;
+	va_list args;
+	int r;
+
+	va_start(args, fmt);
+
+	vaf.fmt = fmt;
+	vaf.va =&args;
+
+	r = printk("%ssas: ata%u: %s: %pV",
+		   level, ap->print_id, dev_name(dev),&vaf);
+
+	va_end(args);
+
+	return r;
+}
+
  static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class,
  			      unsigned long deadline)
  {
@@ -333,7 +355,7 @@ static int sas_ata_hard_reset(struct ata_link *link,
unsigned int *class,
  	res = i->dft->lldd_I_T_nexus_reset(dev);

  	if (res != TMF_RESP_FUNC_COMPLETE)
-		SAS_DPRINTK("%s: Unable to reset ata device?\n", __func__);
+		sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata
device?\n");

  	phy = sas_get_local_phy(dev);
  	if (scsi_is_sas_phy_local(phy))
@@ -344,7 +366,7 @@ static int sas_ata_hard_reset(struct ata_link *link,
unsigned int *class,

  	ret = ata_wait_after_reset(link, deadline, check_ready);
  	if (ret&&  ret != -EAGAIN)
-		ata_link_err(link, "COMRESET failed (errno=%d)\n", ret);
+		sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n",
ret);

  	/* XXX: if the class changes during the reset the upper layer
  	 * should be informed, if the device has gone away we assume
@@ -665,7 +687,7 @@ static void async_sas_ata_eh(void *data,
async_cookie_t
cookie)
  	 * remove once all commands are completed
  	 */
  	kref_get(&dev->kref);
-	ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata port error
handler");
+	sas_ata_printk(KERN_DEBUG, dev, "dev error handler\n");
  	ata_scsi_port_error_handler(ha->core.shost, ap);
  	sas_put_device(dev);

@@ -708,26 +730,27 @@ void sas_ata_eh(struct Scsi_Host *shost, struct
list_head *work_q,
  		struct list_head *done_q)
  {
  	struct scsi_cmnd *cmd, *n;
-	struct ata_port *ap;
+	struct domain_device *eh_dev;

  	do {
  		LIST_HEAD(sata_q);
-
-		ap = NULL;
+		eh_dev = NULL;

  		list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
  			struct domain_device *ddev = cmd_to_domain_dev(cmd);

  			if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd))
  				continue;
-			if (ap&&  ap != ddev->sata_dev.ap)
+			if (eh_dev&&  eh_dev != ddev)
  				continue;
-			ap = ddev->sata_dev.ap;
+			eh_dev = ddev;
  			list_move(&cmd->eh_entry,&sata_q);
  		}

  		if (!list_empty(&sata_q)) {
-			ata_port_printk(ap, KERN_DEBUG, "sas eh calling
libata cmd
error handler\n");
+			struct ata_port *ap = eh_dev->sata_dev.ap;
+
+			sas_ata_printk(KERN_DEBUG, eh_dev, "cmd error
handler\n");
  			ata_scsi_cmd_error_handler(shost, ap,&sata_q);
  			/*
  			 * ata's error handler may leave the cmd on the list
@@ -743,7 +766,7 @@ void sas_ata_eh(struct Scsi_Host *shost, struct
list_head
*work_q,
  			while (!list_empty(&sata_q))
  				list_del_init(sata_q.next);
  		}
-	} while (ap);
+	} while (eh_dev);
  }

  void sas_ata_schedule_reset(struct domain_device *dev)
diff --git a/drivers/scsi/libsas/sas_expander.c
b/drivers/scsi/libsas/sas_expander.c
index 68a80a0..f8d941f 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -176,9 +176,10 @@ static void sas_set_ex_phy(struct domain_device *dev,
int
phy_id,
  	struct smp_resp *resp = disc_resp;
  	struct discover_resp *dr =&resp->disc;
  	struct sas_rphy *rphy = dev->rphy;
-	int rediscover = (phy->phy != NULL);
+	bool new_phy = !phy->phy;
+	char *type;

-	if (!rediscover) {
+	if (new_phy) {
  		phy->phy = sas_phy_alloc(&rphy->dev, phy_id);

  		/* FIXME: error_handling */
@@ -223,20 +224,43 @@ static void sas_set_ex_phy(struct domain_device
*dev,
int phy_id,
  	phy->phy->maximum_linkrate = dr->pmax_linkrate;
  	phy->phy->negotiated_linkrate = phy->linkrate;

-	if (!rediscover)
+	if (new_phy)
  		if (sas_phy_add(phy->phy)) {
  			sas_phy_free(phy->phy);
  			return;
  		}

-	SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n",
+	switch (phy->attached_dev_type) {
+	case NO_DEVICE:
+		type = "no device";
+		break;
+	case SAS_END_DEV:
+		if (phy->attached_iproto) {
+			if (phy->attached_tproto)
+				type = "host+target";
+			else
+				type = "host";
+		} else {
+			if (dr->attached_sata_dev)
+				type = "stp";
+			else
+				type = "ssp";
+		}
+		break;
+	case EDGE_DEV:
+	case FANOUT_DEV:
+		type = "smp";
+		break;
+	default:
+		type = "unknown";
+	}
+
+	SAS_DPRINTK("ex %016llx phy%02d:%c:%X attached: %016llx (%s)\n",
  		    SAS_ADDR(dev->sas_addr), phy->phy_id,
  		    phy->routing_attr == TABLE_ROUTING ? 'T' :
  		    phy->routing_attr == DIRECT_ROUTING ? 'D' :
  		    phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?',
-		    SAS_ADDR(phy->attached_sas_addr));
-
-	return;
+		    phy->linkrate, SAS_ADDR(phy->attached_sas_addr), type);
  }

  /* check if we have an existing attached ata device on this expander phy
*/

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux