Changes since v5: http://marc.info/?l=linux-scsi&m=132656475829637&w=2 1/ Reworked "libsas: let libata recover links that fail to transmit initial sig-fis" to better handle problematic expanders and slow to attach ata devices. libsas will now validate linkrate and take 'device-type' into account when determining if a new device is attached. 2/ Added support for asynchronously scanning ata devices. 3/ Reworked "libsas: fix sas_unregister_ports vs sas_drain_work" as lockdep complained about the original. 4/ New patch "libsas: fix sas port naming" makes direct-attached device naming more predictable and consistent with expander attached device naming. 5/ Made scan order more predictable by ensuring that regardless of device type we always attach in discovery order. Slow to link devices will still be scanned out of order, link needs to be in at least the 'stp pending' state before the device will be considered attached. --- Dan Williams (7): libsas: fix sas_unregister_ports vs sas_drain_work libsas: improve ata debug statements libsas: fix sas port naming libsas: let libata recover links that fail to transmit initial sig-fis libsas: delete device on sas address changed libsas: restore scan order libsas: async ata scanning drivers/ata/libata-core.c | 34 +++-- drivers/ata/libata-scsi.c | 13 ++ drivers/ata/libata.h | 1 drivers/scsi/aic94xx/aic94xx_init.c | 1 drivers/scsi/isci/init.c | 1 drivers/scsi/libsas/sas_ata.c | 187 +++++++++++++++++++++-------- drivers/scsi/libsas/sas_discover.c | 47 +++++-- drivers/scsi/libsas/sas_event.c | 19 ++- drivers/scsi/libsas/sas_expander.c | 229 +++++++++++++++++++++-------------- drivers/scsi/libsas/sas_init.c | 18 ++- drivers/scsi/libsas/sas_internal.h | 16 ++ drivers/scsi/libsas/sas_port.c | 2 drivers/scsi/libsas/sas_scsi_host.c | 18 --- drivers/scsi/mvsas/mv_init.c | 1 drivers/scsi/pm8001/pm8001_init.c | 1 include/linux/libata.h | 1 include/scsi/libsas.h | 1 include/scsi/sas.h | 4 - include/scsi/sas_ata.h | 23 ++-- 19 files changed, 398 insertions(+), 219 deletions(-) Full snapshot in git: note that libsas-eh-reworks-v4..libsas-eh-reworks-v6 is a fast-forward, but that will not always be the case. The following changes since commit 76ffe8a3f766358a0ade543153625b3e4e66159d: [SCSI] libfc: remove redundant timer init for fcp (2012-01-16 12:47:18 +0400) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git libsas-eh-reworks-v6 Dan Williams (47): libsas: remove unused ata_task_resp fields libsas: kill sas_slave_destroy libsas: fix domain_device leak libsas: fix leak of dev->sata_dev.identify_[packet_]device libsas: replace event locks with atomic bitops libsas: convert ha->state to flags libsas: introduce sas_drain_work() libsas: remove ata_port.lock management duties from lldds libsas: convert dev->gone to flags libsas: prevent domain rediscovery competing with ata error handling libsas: use ->set_dmamode to notify lldds of NCQ parameters libsas: kill invocation of scsi_eh_finish_cmd from sas_ata_task_done libsas: close error handling vs sas_ata_task_done() race libsas: prevent double completion of scmds from eh libsas: fix timeout vs completion race libsas: let libata handle command timeouts libsas: defer SAS_TASK_NEED_DEV_RESET commands to libata libsas: use libata-eh-reset for sata rediscovery fis transmit failures libsas: perform sas-transport resets in shost->workq context libsas: execute transport link resets with libata-eh via host workqueue libsas: sas_phy_enable via transport_sas_phy_reset libsas: async ata-eh libsas: poll for ata device readiness after reset libsas: don't mark expanders as gone when a child device is removed libsas: check for 'gone' expanders in smp_execute_task() libsas: fix sas_find_local_phy(), take phy references libsas: don't recover 'gone' devices in sas_ata_hard_reset() isci: kill iphy->isci_port lookups isci: kill isci_port->status isci: fix interpretation of "hard" reset isci: stop interpreting ->lldd_lu_reset() as an ata soft-reset isci: ->lldd_ata_check_ready handler isci: remove bus and reset handlers isci: remove IDEV_EH hack to disable "discovery-time" ata resets libsas: pre-clean commands that won the eh vs completion race libsas: feed the scsi_block_when_processing_errors() meter libsas: mark all domain devices gone if root port disappears libsas: close scsi_remove_target() vs libata-eh race libsas: fix mixed topology recovery libsas: route local link resets through ata-eh libsas: fix sas_unregister_ports vs sas_drain_work libsas: improve ata debug statements libsas: fix sas port naming libsas: let libata recover links that fail to transmit initial sig-fis libsas: delete device on sas address changed libsas: restore scan order libsas: async ata scanning Jeff Skirvin (2): libsas: Remove redundant phy state notification calls. libsas: add mutex for SMP task execution Maciej Trela (1): libsas: kill spurious sas_put_device Documentation/scsi/libsas.txt | 15 - drivers/ata/libata-core.c | 34 +- drivers/ata/libata-eh.c | 1 + drivers/ata/libata-scsi.c | 13 + drivers/ata/libata.h | 2 +- drivers/scsi/aic94xx/aic94xx.h | 2 + drivers/scsi/aic94xx/aic94xx_dev.c | 38 +- drivers/scsi/aic94xx/aic94xx_init.c | 6 +- drivers/scsi/aic94xx/aic94xx_tmf.c | 9 +- drivers/scsi/isci/host.c | 8 +- drivers/scsi/isci/host.h | 19 +- drivers/scsi/isci/init.c | 14 +- drivers/scsi/isci/phy.c | 18 +- drivers/scsi/isci/phy.h | 1 - drivers/scsi/isci/port.c | 217 +++++----- drivers/scsi/isci/port.h | 11 +- drivers/scsi/isci/remote_device.c | 32 +- drivers/scsi/isci/remote_device.h | 7 +- drivers/scsi/isci/request.c | 198 +-------- drivers/scsi/isci/request.h | 9 +- drivers/scsi/isci/task.c | 158 ++------ drivers/scsi/isci/task.h | 40 -- drivers/scsi/libsas/sas_ata.c | 818 +++++++++++++++++------------------ drivers/scsi/libsas/sas_discover.c | 204 +++++++-- drivers/scsi/libsas/sas_event.c | 96 ++++- drivers/scsi/libsas/sas_expander.c | 304 +++++++++----- drivers/scsi/libsas/sas_host_smp.c | 11 +- drivers/scsi/libsas/sas_init.c | 211 ++++++++- drivers/scsi/libsas/sas_internal.h | 80 +++-- drivers/scsi/libsas/sas_phy.c | 12 +- drivers/scsi/libsas/sas_port.c | 30 +- drivers/scsi/libsas/sas_scsi_host.c | 354 +++++++--------- drivers/scsi/mvsas/mv_init.c | 2 - drivers/scsi/mvsas/mv_sas.c | 11 +- drivers/scsi/pm8001/pm8001_init.c | 2 - drivers/scsi/pm8001/pm8001_sas.c | 29 +- drivers/scsi/scsi_transport_sas.c | 59 +++- include/linux/libata.h | 2 + include/scsi/libsas.h | 70 ++-- include/scsi/sas.h | 4 +- include/scsi/sas_ata.h | 44 ++- include/scsi/scsi_transport_sas.h | 12 +- 42 files changed, 1686 insertions(+), 1521 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
