[RFC PATCH 3/5] libsas: dynamic queue depth

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The queue-depth for libsas-attached devices initializes to 32 and can
only be increased manually via sysfs to a max of 64, while mpt2sas
attached devices initialize to 254 and dynamically float via the
midlayer ->change_queue_depth interface.

No performance regression was observed with this change on the isci
driver.

Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Mark Salyzyn <msalyzyn@xxxxxxxxxxxxxx>
Cc: Xiangliang Yu <yuxiangl@xxxxxxxxxxx>
Cc: Jack Wang <jack_wang@xxxxxxxxx>
Cc: Mark Salyzyn <msalyzyn@xxxxxxxxxxxxxx>
Cc: Luben Tuikov <ltuikov@xxxxxxxxx>
Tested-by: Dave Jiang <dave.jiang@xxxxxxxxx>
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
---
 drivers/scsi/libsas/sas_scsi_host.c |   39 ++++++++++++++++-------------------
 1 files changed, 18 insertions(+), 21 deletions(-)

diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 4c6923c..fe08ef0 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -784,8 +784,7 @@ int sas_target_alloc(struct scsi_target *starget)
 	return 0;
 }
 
-#define SAS_DEF_QD 32
-#define SAS_MAX_QD 64
+#define SAS_DEF_QD 256
 
 int sas_slave_configure(struct scsi_device *scsi_dev)
 {
@@ -828,31 +827,29 @@ void sas_slave_destroy(struct scsi_device *scsi_dev)
 		dev->sata_dev.ap->link.device[0].class = ATA_DEV_NONE;
 }
 
-int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth,
-			   int reason)
+int sas_change_queue_depth(struct scsi_device *sdev, int depth, int reason)
 {
-	struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
-	int res = min(new_depth, SAS_MAX_QD);
+	struct domain_device *dev = sdev_to_domain_dev(sdev);
 
 	if (dev_is_sata(dev))
-		return __ata_change_queue_depth(dev->sata_dev.ap, scsi_dev,
-						new_depth, reason);
-
-	if (reason != SCSI_QDEPTH_DEFAULT)
+		return __ata_change_queue_depth(dev->sata_dev.ap, sdev, depth,
+						reason);
+
+	switch (reason) {
+	case SCSI_QDEPTH_DEFAULT:
+	case SCSI_QDEPTH_RAMP_UP:
+		if (!sdev->tagged_supported)
+			depth = 1;
+		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+		break;
+	case SCSI_QDEPTH_QFULL:
+		scsi_track_queue_full(sdev, depth);
+		break;
+	default:
 		return -EOPNOTSUPP;
-
-	if (scsi_dev->tagged_supported)
-		scsi_adjust_queue_depth(scsi_dev, scsi_get_tag_type(scsi_dev),
-					res);
-	else {
-		sas_printk("device %llx LUN %x queue depth changed to 1\n",
-			   SAS_ADDR(dev->sas_addr),
-			   scsi_dev->lun);
-		scsi_adjust_queue_depth(scsi_dev, 0, 1);
-		res = 1;
 	}
 
-	return res;
+	return depth;
 }
 
 int sas_change_queue_type(struct scsi_device *scsi_dev, int qt)

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux