Pass queue_depth change requests to libata, and prevent queue_type
changes for ATA devices.
Otherwise:
1/ we do not honor the libata specific restrictions on the queue depth
2/ libsas drivers that do not set sdev->tagged_supported are unable to
change the queue_depth of ata devices via sysfs
Cc: Tejun Heo <tj@xxxxxxxxxx>
Cc: Xiangliang Yu <yuxiangl@xxxxxxxxxxx>
Cc: Jack Wang <jack_wang@xxxxxxxxx>
Cc: Mark Salyzyn <msalyzyn@xxxxxxxxxxxxxx>
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
---
drivers/ata/libata-core.c | 1 +
drivers/ata/libata-scsi.c | 44 +++++++++++++++++++++++------------
drivers/scsi/libsas/sas_scsi_host.c | 11 ++++++++-
include/linux/libata.h | 2 ++
4 files changed, 42 insertions(+), 16 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4a3a5ae..d26c7f4 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6713,6 +6713,7 @@ EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
+EXPORT_SYMBOL_GPL(__ata_change_queue_depth);
EXPORT_SYMBOL_GPL(sata_scr_valid);
EXPORT_SYMBOL_GPL(sata_scr_read);
EXPORT_SYMBOL_GPL(sata_scr_write);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 46d087f..19ba770 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1215,25 +1215,15 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev)
}
/**
- * ata_scsi_change_queue_depth - SCSI callback for queue depth config
- * @sdev: SCSI device to configure queue depth for
- * @queue_depth: new queue depth
- * @reason: calling context
- *
- * This is libata standard hostt->change_queue_depth callback.
- * SCSI will call into this callback when user tries to set queue
- * depth via sysfs.
+ * __ata_change_queue_depth - helper for ata_scsi_change_queue_depth
*
- * LOCKING:
- * SCSI layer (we don't care)
+ * libsas and libata have different approaches for associating a sdev to
+ * its ata_port.
*
- * RETURNS:
- * Newly configured queue depth.
*/
-int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth,
- int reason)
+int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
+ int queue_depth, int reason)
{
- struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev;
unsigned long flags;
@@ -1269,6 +1259,30 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth,
}
/**
+ * ata_scsi_change_queue_depth - SCSI callback for queue depth config
+ * @sdev: SCSI device to configure queue depth for
+ * @queue_depth: new queue depth
+ * @reason: calling context
+ *
+ * This is libata standard hostt->change_queue_depth callback.
+ * SCSI will call into this callback when user tries to set queue
+ * depth via sysfs.
+ *
+ * LOCKING:
+ * SCSI layer (we don't care)
+ *
+ * RETURNS:
+ * Newly configured queue depth.
+ */
+int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth,
+ int reason)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+
+ return __ata_change_queue_depth(ap, sdev, queue_depth, reason);
+}
+
+/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
*
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index eeba76c..4c6923c 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -831,8 +831,13 @@ void sas_slave_destroy(struct scsi_device *scsi_dev)
int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth,
int reason)
{
+ struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
int res = min(new_depth, SAS_MAX_QD);
+ if (dev_is_sata(dev))
+ return __ata_change_queue_depth(dev->sata_dev.ap, scsi_dev,
+ new_depth, reason);
+
if (reason != SCSI_QDEPTH_DEFAULT)
return -EOPNOTSUPP;
@@ -840,7 +845,6 @@ int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth,
scsi_adjust_queue_depth(scsi_dev, scsi_get_tag_type(scsi_dev),
res);
else {
- struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
sas_printk("device %llx LUN %x queue depth changed to 1\n",
SAS_ADDR(dev->sas_addr),
scsi_dev->lun);
@@ -853,6 +857,11 @@ int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth,
int sas_change_queue_type(struct scsi_device *scsi_dev, int qt)
{
+ struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+
+ if (dev_is_sata(dev))
+ return -EINVAL;
+
if (!scsi_dev->tagged_supported)
return 0;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index efd6f98..23fa829 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1052,6 +1052,8 @@ extern int ata_scsi_slave_config(struct scsi_device *sdev);
extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
int queue_depth, int reason);
+extern int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
+ int queue_depth, int reason);
extern struct ata_device *ata_dev_pair(struct ata_device *adev);
extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap);
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
