Re: qc timeout on a marvell 88F6282 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2011-07-07 오후 3:44, saeed bishara 쓴 글:
On Thu, Jul 7, 2011 at 9:36 AM, Richard Kang<turquesa@xxxxxxxxx>  wrote:
2011-07-06 오후 5:07, saeed bishara 쓴 글:
Richard,

  this board is supported by mainline kernel, can you try latest
version (3.0-rcX)?
I can't find reason of not working. Please advise to me.

Thank you.

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Dear saeed,

I tested sata_sil24 driver with 3.0.0-rc6.
At first booting, machine id was not supported in new kernel.
And I replaced id(0x690) of DB-88F6281-BP with 0x20f.
After changing machine id, booting was completed.

I loaded "libata dma=0" and "sata_sil24".
But result was same to before. ->  qc timeout(0xec)
does this controller (sil24) works on different platfrom (PC)?
have you tried different disk?
Thank you.

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Dear saeed,

I tested this controller and this disk on a PC(ubuntu 10.10).
The controller works well. I test disk I/O. No problem.

Thank you.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux