Re: qc timeout on a marvell 88F6282 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




2011/6/29 Richard Kang<turquesa@xxxxxxxxx>:
Hello.

I have a sil3132 pci-e card and a DB-88F6282-A-BP(Marvell development
board based on Arm9).
I compiled sata_sil24 driver as a module with a cross-compiler.

But, when loading the driver, qc timeout error was occurred during
ata_read_dev_id.
What is wrong, IRQ or DMA ?
looks to me this is DMA issue, can you force pio mode? you can do that
by adding "libata.dma=0" to the kernel command line.
saeed

I have 2.6.31.8

Dear saeed,

I excuted libata.dma=0 through "$modprobe libata dma=0"
Then I excuted "$modprobe sata_sil24"

But, result is same as before.
I think sata_sil24 supports only dma not pio, right?

Thank you.

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux