Re: 2.6.39-rc6: SATA hangs for a few seconds during boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 09, 2011 at 22:48:01 +0200, Tino Keitel wrote:
> Hi,
> 
> I get a hanging SATA port for a few seconds during boot, with these
> kernel messages:
> 
> ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x6 frozen
> ata1.00: cmd 60/20:00:55:e1:65/00:00:00:00:00/40 tag 0 ncq 16384 in
>          res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1.00: cmd 60/02:08:c1:5c:03/00:00:00:00:00/40 tag 1 ncq 1024 in
>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1: hard resetting link
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: both IDENTIFYs aborted, assuming NODEV
> ata1.00: revalidation failed (errno=-2)
> ata1: hard resetting link
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
> ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
> ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
> ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
> ata1.00: configured for UDMA/133
> ata1.00: device reported invalid CHS sector 0
> ata1.00: device reported invalid CHS sector 0
> ata1: EH complete
> 
> This happens with 2.6.39-rc6 with TuxOnIce patch included, but during boot
> without any suspend actions. The hardware is a ThinkPad X61s:

Hi,

I tried again with vanilla 2.6.39-rc7 and got the same hang:

ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x6 frozen
ata1.00: cmd 60/02:00:a5:80:07/00:00:00:00:00/40 tag 0 ncq 1024 in
         res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: cmd 60/02:08:fd:5d:03/00:00:00:00:00/40 tag 1 ncq 1024 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: both IDENTIFYs aborted, assuming NODEV
ata1.00: revalidation failed (errno=-2)
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1: EH complete

I also attached the config file.

Regards,
Tino

Attachment: config.xz
Description: Binary data


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux