Hi,
I get a hanging SATA port for a few seconds during boot, with these
kernel messages:
ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x6 frozen
ata1.00: cmd 60/20:00:55:e1:65/00:00:00:00:00/40 tag 0 ncq 16384 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: cmd 60/02:08:c1:5c:03/00:00:00:00:00/40 tag 1 ncq 1024 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: both IDENTIFYs aborted, assuming NODEV
ata1.00: revalidation failed (errno=-2)
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1: EH complete
This happens with 2.6.39-rc6 with TuxOnIce patch included, but during boot
without any suspend actions. The hardware is a ThinkPad X61s:
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
SATA AHCI Controller (rev 03)
Complete dmesg is attached.
Regards,
Tino
Attachment:
dmesg.xz
Description: Binary data
