Hi, Four weeks ago I bought a new 2TB Seagate Barracuda internal SATA drive. That drive has two 667GB ext4 partions (667GB unused) and it is used for storage. My main system (Debian Sid 64-bit and KDE) resides on a 40GB SSD, also using ext4. Two weeks ago I noticed a severe performance drop, where any file manager couldn't view directories on the 2TB disk without a one or two minute penalty. After that I have had three hard freezes of that disk and the entire system. Before the freeze there is very much hd activity and finally I need to turn the power off. I have now also made a backup of /dev/sdb1 should it be fatally serious. I was recommended by someone at the #debian irc to make changes to the spindown_time but that only helped for a few days. Yesterday, the 3rd freeze came and the system wouldn't even recognize the disk after reboot; just 'clicking' waiting for a response. I showed the kern.log to someone at the same channel who concluded that this should be a firmware issue. Here is the latest kern.log which may identify the issue: I hope it contains the relevant details. But first the output of smartctl -a /dev/sdb. I have now set the hdparm spindown_time to 0, disabling disk sleep which seems to have been the culprit as judged on messages in the Dolphin file manager etc. Thanks for any help! > # smartctl -a /dev/sdb > smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) > Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net > > === START OF INFORMATION SECTION === > Model Family: Seagate Barracuda LP > Device Model: ST32000542AS > Serial Number: 5XW20H7P > Firmware Version: CC34 > User Capacity: 2,000,398,934,016 bytes > Device is: In smartctl database [for details use: -P show] > ATA Version is: 8 > ATA Standard is: ATA-8-ACS revision 4 > Local Time is: Sun Jan 23 11:50:56 2011 CET > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: Disabled. > Self-test execution status: ( 0) The previous self-test routine completed > without error or no self-test has ever > been run. > Total time to complete Offline > data collection: ( 633) seconds. > Offline data collection > capabilities: (0x73) SMART execute Offline immediate. > Auto Offline data collection on/off support. > Suspend Offline collection upon new > command. > No Offline surface scan supported. > Self-test supported. > Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 1) minutes. > Extended self-test routine > recommended polling time: ( 255) minutes. > Conveyance self-test routine > recommended polling time: ( 2) minutes. > SCT capabilities: (0x103f) SCT Status supported. > SCT Error Recovery Control supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 10 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000f 100 089 006 Pre-fail Always - 184733939 > 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0 > 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1160 > 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 > 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 296094 > 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 307 > 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 > 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1186 > 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 > 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 > 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 225 > 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032833 > 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 > 190 Airflow_Temperature_Cel 0x0022 063 063 045 Old_age Always - 37 (Lifetime Min/Max 19/37) > 194 Temperature_Celsius 0x0022 037 040 000 Old_age Always - 37 (0 16 0 0) > 195 Hardware_ECC_Recovered 0x001a 052 033 000 Old_age Always - 184733939 > 197 Current_Pending_Sector 0x0012 100 099 000 Old_age Always - 40 > 198 Offline_Uncorrectable 0x0010 100 099 000 Old_age Offline - 40 > 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 > 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 210019605808507 > 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 546635184 > 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2195715347 > > SMART Error Log Version: 1 > ATA Error Count: 303 (device log contains only the most recent five errors) > CR = Command Register [HEX] > FR = Features Register [HEX] > SC = Sector Count Register [HEX] > SN = Sector Number Register [HEX] > CL = Cylinder Low Register [HEX] > CH = Cylinder High Register [HEX] > DH = Device/Head Register [HEX] > DC = Device Command Register [HEX] > ER = Error register [HEX] > ST = Status register [HEX] > Powered_Up_Time is measured from power on, and printed as > DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, > SS=sec, and sss=millisec. It "wraps" after 49.710 days. > > Error 303 occurred at disk power-on lifetime: 305 hours (12 days + 17 hours) > When the command that caused the error occurred, the device was active or idle. > > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 00 58 e9 a8 00 Error: UNC at LBA = 0x00a8e958 = 11069784 > > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- -------------------- > c8 00 08 57 e9 a8 e0 00 02:02:27.917 READ DMA > 27 00 00 00 00 00 e0 00 02:02:27.916 READ NATIVE MAX ADDRESS EXT > ec 00 00 00 00 00 a0 00 02:02:27.908 IDENTIFY DEVICE > ef 03 46 00 00 00 a0 00 02:02:27.877 SET FEATURES [Set transfer mode] > 27 00 00 00 00 00 e0 00 02:02:27.788 READ NATIVE MAX ADDRESS EXT > > Error 302 occurred at disk power-on lifetime: 305 hours (12 days + 17 hours) > When the command that caused the error occurred, the device was active or idle. > > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 00 58 e9 a8 00 Error: UNC at LBA = 0x00a8e958 = 11069784 > > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- -------------------- > c8 00 08 57 e9 a8 e0 00 02:02:24.081 READ DMA > 27 00 00 00 00 00 e0 00 02:02:24.080 READ NATIVE MAX ADDRESS EXT > ec 00 00 00 00 00 a0 00 02:02:24.071 IDENTIFY DEVICE > ef 03 46 00 00 00 a0 00 02:02:24.066 SET FEATURES [Set transfer mode] > 27 00 00 00 00 00 e0 00 02:02:24.044 READ NATIVE MAX ADDRESS EXT > > Error 301 occurred at disk power-on lifetime: 305 hours (12 days + 17 hours) > When the command that caused the error occurred, the device was active or idle. > > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 00 58 e9 a8 00 Error: UNC at LBA = 0x00a8e958 = 11069784 > > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- -------------------- > c8 00 08 57 e9 a8 e0 00 02:02:20.320 READ DMA > 27 00 00 00 00 00 e0 00 02:02:20.319 READ NATIVE MAX ADDRESS EXT > ec 00 00 00 00 00 a0 00 02:02:20.310 IDENTIFY DEVICE > ef 03 46 00 00 00 a0 00 02:02:20.302 SET FEATURES [Set transfer mode] > 27 00 00 00 00 00 e0 00 02:02:20.279 READ NATIVE MAX ADDRESS EXT > > Error 300 occurred at disk power-on lifetime: 305 hours (12 days + 17 hours) > When the command that caused the error occurred, the device was active or idle. > > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 00 58 e9 a8 00 Error: UNC at LBA = 0x00a8e958 = 11069784 > > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- -------------------- > c8 00 08 57 e9 a8 e0 00 02:02:16.559 READ DMA > 27 00 00 00 00 00 e0 00 02:02:16.558 READ NATIVE MAX ADDRESS EXT > ec 00 00 00 00 00 a0 00 02:02:16.546 IDENTIFY DEVICE > ef 03 46 00 00 00 a0 00 02:02:16.538 SET FEATURES [Set transfer mode] > 27 00 00 00 00 00 e0 00 02:02:16.506 READ NATIVE MAX ADDRESS EXT > > Error 299 occurred at disk power-on lifetime: 305 hours (12 days + 17 hours) > When the command that caused the error occurred, the device was active or idle. > > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 00 58 e9 a8 00 Error: UNC at LBA = 0x00a8e958 = 11069784 > > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- -------------------- > c8 00 08 57 e9 a8 e0 00 02:02:12.770 READ DMA > 27 00 00 00 00 00 e0 00 02:02:12.769 READ NATIVE MAX ADDRESS EXT > ec 00 00 00 00 00 a0 00 02:02:12.761 IDENTIFY DEVICE > ef 03 46 00 00 00 a0 00 02:02:12.754 SET FEATURES [Set transfer mode] > 27 00 00 00 00 00 e0 00 02:02:12.725 READ NATIVE MAX ADDRESS EXT > > SMART Self-test log structure revision number 1 > No self-tests have been logged. [To run self-tests, use: smartctl -t] > > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. and here is the output of kern.log Jan 22 07:26:59 my kernel: [ 0.439387] SCSI subsystem initialized Jan 22 07:26:59 my kernel: [ 0.443964] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jan 22 07:26:59 my kernel: [ 0.443981] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jan 22 07:26:59 my kernel: [ 0.443983] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 22 07:26:59 my kernel: [ 0.443984] usb usb1: Product: EHCI Host Controller Jan 22 07:26:59 my kernel: [ 0.443986] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd Jan 22 07:26:59 my kernel: [ 0.443987] usb usb1: SerialNumber: 0000:00:1d.7 Jan 22 07:26:59 my kernel: [ 0.444064] usb usb1: configuration #1 chosen from 1 choice Jan 22 07:26:59 my kernel: [ 0.444105] hub 1-0:1.0: USB hub found Jan 22 07:26:59 my kernel: [ 0.444110] hub 1-0:1.0: 8 ports detected Jan 22 07:26:59 my kernel: [ 0.444170] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Jan 22 07:26:59 my kernel: [ 0.444176] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jan 22 07:26:59 my kernel: [ 0.444178] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jan 22 07:26:59 my kernel: [ 0.444184] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Jan 22 07:26:59 my kernel: [ 0.444203] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b880 Jan 22 07:26:59 my kernel: [ 0.444225] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jan 22 07:26:59 my kernel: [ 0.444227] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 22 07:26:59 my kernel: [ 0.444229] usb usb2: Product: UHCI Host Controller Jan 22 07:26:59 my kernel: [ 0.444230] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd Jan 22 07:26:59 my kernel: [ 0.444231] usb usb2: SerialNumber: 0000:00:1d.0 Jan 22 07:26:59 my kernel: [ 0.444268] usb usb2: configuration #1 chosen from 1 choice Jan 22 07:26:59 my kernel: [ 0.444285] hub 2-0:1.0: USB hub found Jan 22 07:26:59 my kernel: [ 0.444289] hub 2-0:1.0: 2 ports detected Jan 22 07:26:59 my kernel: [ 0.444323] alloc irq_desc for 19 on node -1 Jan 22 07:26:59 my kernel: [ 0.444325] alloc kstat_irqs on node -1 Jan 22 07:26:59 my kernel: [ 0.444329] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Jan 22 07:26:59 my kernel: [ 0.444333] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jan 22 07:26:59 my kernel: [ 0.444335] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jan 22 07:26:59 my kernel: [ 0.444340] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Jan 22 07:26:59 my kernel: [ 0.444364] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bc00 Jan 22 07:26:59 my kernel: [ 0.444387] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jan 22 07:26:59 my kernel: [ 0.444388] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 22 07:26:59 my kernel: [ 0.444390] usb usb3: Product: UHCI Host Controller Jan 22 07:26:59 my kernel: [ 0.444391] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd Jan 22 07:26:59 my kernel: [ 0.444392] usb usb3: SerialNumber: 0000:00:1d.1 Jan 22 07:26:59 my kernel: [ 0.444429] usb usb3: configuration #1 chosen from 1 choice Jan 22 07:26:59 my kernel: [ 0.444447] hub 3-0:1.0: USB hub found Jan 22 07:26:59 my kernel: [ 0.444451] hub 3-0:1.0: 2 ports detected Jan 22 07:26:59 my kernel: [ 0.444485] alloc irq_desc for 18 on node -1 Jan 22 07:26:59 my kernel: [ 0.444486] alloc kstat_irqs on node -1 Jan 22 07:26:59 my kernel: [ 0.444489] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Jan 22 07:26:59 my kernel: [ 0.444493] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jan 22 07:26:59 my kernel: [ 0.444495] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jan 22 07:26:59 my kernel: [ 0.444500] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Jan 22 07:26:59 my kernel: [ 0.444523] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000 Jan 22 07:26:59 my kernel: [ 0.444546] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jan 22 07:26:59 my kernel: [ 0.444547] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 22 07:26:59 my kernel: [ 0.444549] usb usb4: Product: UHCI Host Controller Jan 22 07:26:59 my kernel: [ 0.444550] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd Jan 22 07:26:59 my kernel: [ 0.444551] usb usb4: SerialNumber: 0000:00:1d.2 Jan 22 07:26:59 my kernel: [ 0.444586] usb usb4: configuration #1 chosen from 1 choice Jan 22 07:26:59 my kernel: [ 0.444606] hub 4-0:1.0: USB hub found Jan 22 07:26:59 my kernel: [ 0.444610] hub 4-0:1.0: 2 ports detected Jan 22 07:26:59 my kernel: [ 0.444641] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 Jan 22 07:26:59 my kernel: [ 0.444645] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jan 22 07:26:59 my kernel: [ 0.444648] uhci_hcd 0000:00:1d.3: UHCI Host Controller Jan 22 07:26:59 my kernel: [ 0.444652] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Jan 22 07:26:59 my kernel: [ 0.444676] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c080 Jan 22 07:26:59 my kernel: [ 0.444699] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jan 22 07:26:59 my kernel: [ 0.444701] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 22 07:26:59 my kernel: [ 0.444702] usb usb5: Product: UHCI Host Controller Jan 22 07:26:59 my kernel: [ 0.444704] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd Jan 22 07:26:59 my kernel: [ 0.444705] usb usb5: SerialNumber: 0000:00:1d.3 Jan 22 07:26:59 my kernel: [ 0.444747] usb usb5: configuration #1 chosen from 1 choice Jan 22 07:26:59 my kernel: [ 0.444765] hub 5-0:1.0: USB hub found Jan 22 07:26:59 my kernel: [ 0.444769] hub 5-0:1.0: 2 ports detected Jan 22 07:26:59 my kernel: [ 0.449570] Floppy drive(s): fd0 is 1.44M Jan 22 07:26:59 my kernel: [ 0.449771] libata version 3.00 loaded. Jan 22 07:26:59 my kernel: [ 0.451665] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker Jan 22 07:26:59 my kernel: [ 0.451684] alloc irq_desc for 22 on node -1 Jan 22 07:26:59 my kernel: [ 0.451685] alloc kstat_irqs on node -1 Jan 22 07:26:59 my kernel: [ 0.451689] via-rhine 0000:01:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Jan 22 07:26:59 my kernel: [ 0.456630] ata_piix 0000:00:1f.1: version 2.13 Jan 22 07:26:59 my kernel: [ 0.456912] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Jan 22 07:26:59 my kernel: [ 0.456937] ata_piix 0000:00:1f.1: setting latency timer to 64 Jan 22 07:26:59 my kernel: [ 0.457559] scsi0 : ata_piix Jan 22 07:26:59 my kernel: [ 0.457622] eth0: VIA Rhine III at 0x1d800, 00:11:95:86:8d:f8, IRQ 22. Jan 22 07:26:59 my kernel: [ 0.458339] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. Jan 22 07:26:59 my kernel: [ 0.458343] scsi1 : ata_piix Jan 22 07:26:59 my kernel: [ 0.459329] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 Jan 22 07:26:59 my kernel: [ 0.459331] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 Jan 22 07:26:59 my kernel: [ 0.459348] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Jan 22 07:26:59 my kernel: [ 0.459351] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] Jan 22 07:26:59 my kernel: [ 0.459376] ata_piix 0000:00:1f.2: setting latency timer to 64 Jan 22 07:26:59 my kernel: [ 0.459416] alloc irq_desc for 21 on node -1 Jan 22 07:26:59 my kernel: [ 0.459418] alloc kstat_irqs on node -1 Jan 22 07:26:59 my kernel: [ 0.459422] firewire_ohci 0000:01:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Jan 22 07:26:59 my kernel: [ 0.459499] scsi2 : ata_piix Jan 22 07:26:59 my kernel: [ 0.459561] scsi3 : ata_piix Jan 22 07:26:59 my kernel: [ 0.461184] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19 Jan 22 07:26:59 my kernel: [ 0.461185] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19 Jan 22 07:26:59 my kernel: [ 0.471598] FDC 0 is a post-1991 82077 Jan 22 07:26:59 my kernel: [ 0.535975] firewire_ohci: Added fw-ohci device 0000:01:01.0, OHCI version 1.0 Jan 22 07:26:59 my kernel: [ 0.628338] ata4.00: ATA-8: ST32000542AS, CC34, max UDMA/133 Jan 22 07:26:59 my kernel: [ 0.628341] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) Jan 22 07:26:59 my kernel: [ 0.644250] ata4.00: configured for UDMA/133 Jan 22 07:26:59 my kernel: [ 0.844252] ata3.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102HD, max UDMA/133 Jan 22 07:26:59 my kernel: [ 0.844255] ata3.00: 78165360 sectors, multi 16: LBA48 NCQ (depth 0/32) Jan 22 07:26:59 my kernel: [ 0.844296] ata3.01: ATAPI: TSSTcorp CDDVDW SH-S223C, SB04, max UDMA/100 Jan 22 07:26:59 my kernel: [ 0.852166] ata3.00: configured for UDMA/133 Jan 22 07:26:59 my kernel: [ 0.908202] ata3.01: configured for UDMA/100 Jan 22 07:26:59 my kernel: [ 0.931374] scsi 2:0:0:0: Direct-Access ATA INTEL SSDSA2M040 2CV1 PQ: 0 ANSI: 5 Jan 22 07:26:59 my kernel: [ 0.932025] scsi 2:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB04 PQ: 0 ANSI: 5 Jan 22 07:26:59 my kernel: [ 0.932170] scsi 3:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5 Jan 22 07:26:59 my kernel: [ 0.936896] sd 2:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) Jan 22 07:26:59 my kernel: [ 0.936928] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Jan 22 07:26:59 my kernel: [ 0.936936] sd 2:0:0:0: [sda] Write Protect is off Jan 22 07:26:59 my kernel: [ 0.936938] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jan 22 07:26:59 my kernel: [ 0.936955] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 22 07:26:59 my kernel: [ 0.936965] sd 3:0:0:0: [sdb] Write Protect is off Jan 22 07:26:59 my kernel: [ 0.936967] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Jan 22 07:26:59 my kernel: [ 0.936982] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 22 07:26:59 my kernel: [ 0.937065] sda: Jan 22 07:26:59 my kernel: [ 0.937146] sdb: sda1 sda2 sda3 sda4 Jan 22 07:26:59 my kernel: [ 0.937822] sd 2:0:0:0: [sda] Attached SCSI disk Jan 22 07:26:59 my kernel: [ 0.964915] sdb1 sdb2 sdb3 Jan 22 07:26:59 my kernel: [ 0.965125] sd 3:0:0:0: [sdb] Attached SCSI disk Jan 22 07:26:59 my kernel: [ 1.034615] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray Jan 22 07:26:59 my kernel: [ 1.034618] Uniform CD-ROM driver Revision: 3.20 Jan 22 07:26:59 my kernel: [ 1.034693] sr 2:0:1:0: Attached scsi CD-ROM sr0 Jan 22 07:26:59 my kernel: [ 1.037201] sd 2:0:0:0: Attached scsi generic sg0 type 0 Jan 22 07:26:59 my kernel: [ 1.037275] sr 2:0:1:0: Attached scsi generic sg1 type 5 Jan 22 07:26:59 my kernel: [ 1.037314] sd 3:0:0:0: Attached scsi generic sg2 type 0 Jan 22 07:26:59 my kernel: [ 1.039983] firewire_core: created device fw0: GUID 0011060001112679, S400 Jan 22 07:26:59 my kernel: [ 1.347010] PM: Starting manual resume from disk Jan 22 07:26:59 my kernel: [ 1.347013] PM: Resume from partition 8:2 Jan 22 07:26:59 my kernel: [ 1.347014] PM: Checking hibernation image. Jan 22 07:26:59 my kernel: [ 1.347244] PM: Error -22 checking image file Jan 22 07:26:59 my kernel: [ 1.347246] PM: Resume from disk failed. Jan 22 07:26:59 my kernel: [ 1.361769] EXT4-fs (sda3): mounted filesystem with ordered data mode Jan 22 07:26:59 my kernel: [ 1.505412] udev[360]: starting version 164 Jan 22 07:26:59 my kernel: [ 1.555655] ACPI: SSDT 000000007ff9e0b0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) Jan 22 07:26:59 my kernel: [ 1.555852] processor LNXCPU:00: registered as cooling_device0 Jan 22 07:26:59 my kernel: [ 1.556183] ACPI: SSDT 000000007ff9e290 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) Jan 22 07:26:59 my kernel: [ 1.556330] processor LNXCPU:01: registered as cooling_device1 Jan 22 07:26:59 my kernel: [ 1.559003] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 Jan 22 07:26:59 my kernel: [ 1.559011] ACPI: Power Button [PWRB] Jan 22 07:26:59 my kernel: [ 1.559057] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jan 22 07:26:59 my kernel: [ 1.559059] ACPI: Power Button [PWRF] Jan 22 07:26:59 my kernel: [ 1.568373] input: PC Speaker as /devices/platform/pcspkr/input/input4 Jan 22 07:26:59 my kernel: [ 1.598983] intel_rng: FWH not detected Jan 22 07:26:59 my kernel: [ 2.026042] nvidia: module license 'NVIDIA' taints kernel. Jan 22 07:26:59 my kernel: [ 2.026046] Disabling lock debugging due to kernel taint Jan 22 07:26:59 my kernel: [ 2.239933] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 Jan 22 07:26:59 my kernel: [ 2.247908] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Jan 22 07:26:59 my kernel: [ 2.250796] parport_pc 00:07: reported by Plug and Play ACPI Jan 22 07:26:59 my kernel: [ 2.250890] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] Jan 22 07:26:59 my kernel: [ 2.276519] parport0: Printer, Hewlett-Packard HP LaserJet 1100 Jan 22 07:26:59 my kernel: [ 2.495774] nvidia 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jan 22 07:26:59 my kernel: [ 2.495780] nvidia 0000:04:00.0: setting latency timer to 64 Jan 22 07:26:59 my kernel: [ 2.495784] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem Jan 22 07:26:59 my kernel: [ 2.495862] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.31 Thu Jun 3 08:19:50 PDT 2010 Jan 22 07:26:59 my kernel: [ 2.549543] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jan 22 07:26:59 my kernel: [ 2.549567] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jan 22 07:26:59 my kernel: [ 2.619123] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 Jan 22 07:26:59 my kernel: [ 2.709931] Adding 249848k swap on /dev/sda2. Priority:-1 extents:1 across:249848k SS Jan 22 07:26:59 my kernel: [ 2.784474] loop: module loaded Jan 22 07:26:59 my kernel: [ 3.118288] EXT4-fs (sda4): mounted filesystem with ordered data mode Jan 22 07:26:59 my kernel: [ 3.174861] EXT4-fs (sdb1): mounted filesystem with ordered data mode Jan 22 07:26:59 my kernel: [ 3.212696] EXT4-fs (sdb2): mounted filesystem with ordered data mode Jan 22 07:26:59 my kernel: [ 3.331711] ip_tables: (C) 2000-2006 Netfilter Core Team Jan 22 07:26:59 my kernel: [ 3.341759] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) Jan 22 07:26:59 my kernel: [ 3.341943] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use Jan 22 07:26:59 my kernel: [ 3.341945] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or Jan 22 07:26:59 my kernel: [ 3.341946] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Jan 22 07:26:59 my kernel: [ 3.365328] ip6_tables: (C) 2000-2006 Netfilter Core Team Jan 22 07:26:59 my kernel: [ 8.449954] fuse init (API version 7.13) Jan 22 07:27:00 my kernel: [ 9.362940] alloc irq_desc for 27 on node -1 Jan 22 07:27:00 my kernel: [ 9.362942] alloc kstat_irqs on node -1 Jan 22 07:27:00 my kernel: [ 9.362957] atl1 0000:02:00.0: irq 27 for MSI/MSI-X Jan 22 07:27:00 my kernel: [ 9.363242] ADDRCONF(NETDEV_UP): eth1: link is not ready Jan 22 07:27:00 my kernel: [ 9.365260] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Jan 22 07:27:01 my kernel: [ 9.861987] lp0: using parport0 (interrupt-driven). Jan 22 07:27:01 my kernel: [ 9.864872] ppdev: user-space parallel port driver Jan 22 07:27:11 my kernel: [ 19.896007] eth0: no IPv6 routers present Jan 22 07:28:33 my kernel: [ 102.645811] CPU0 attaching NULL sched-domain. Jan 22 07:28:33 my kernel: [ 102.645816] CPU1 attaching NULL sched-domain. Jan 22 07:28:33 my kernel: [ 102.668591] CPU0 attaching sched-domain: Jan 22 07:28:33 my kernel: [ 102.668594] domain 0: span 0-1 level MC Jan 22 07:28:33 my kernel: [ 102.668596] groups: 0 1 Jan 22 07:28:33 my kernel: [ 102.668601] CPU1 attaching sched-domain: Jan 22 07:28:33 my kernel: [ 102.668603] domain 0: span 0-1 level MC Jan 22 07:28:33 my kernel: [ 102.668606] groups: 1 0 Jan 22 15:07:58 my kernel: [27667.804537] ata4: lost interrupt (Status 0x50) Jan 22 15:07:58 my kernel: [27667.804557] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 22 15:07:58 my kernel: [27667.804562] ata4.00: failed command: READ DMA EXT Jan 22 15:07:58 my kernel: [27667.804568] ata4.00: cmd 25/00:38:cf:12:8a/00:00:4d:00:00/e0 tag 0 dma 28672 in Jan 22 15:07:58 my kernel: [27667.804569] res 40/00:f0:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Jan 22 15:07:58 my kernel: [27667.804572] ata4.00: status: { DRDY } Jan 22 15:07:58 my kernel: [27667.804582] ata4: soft resetting link Jan 22 15:07:59 my kernel: [27667.987633] ata4.00: configured for UDMA/133 Jan 22 15:07:59 my kernel: [27667.987648] ata4.00: device reported invalid CHS sector 0 Jan 22 15:07:59 my kernel: [27667.987680] ata4: EH complete Jan 22 15:08:29 my kernel: [27698.804569] ata4: lost interrupt (Status 0x50) Jan 22 15:08:29 my kernel: [27698.804592] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 22 15:08:29 my kernel: [27698.804597] ata4.00: failed command: READ DMA Jan 22 15:08:29 my kernel: [27698.804602] ata4.00: cmd c8/00:80:7f:74:08/00:00:00:00:00/e0 tag 0 dma 65536 in Jan 22 15:08:29 my kernel: [27698.804603] res 40/00:f0:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Jan 22 15:08:29 my kernel: [27698.804605] ata4.00: status: { DRDY } Jan 22 15:08:29 my kernel: [27698.804616] ata4: soft resetting link Jan 22 15:08:30 my kernel: [27698.988495] ata4.00: configured for UDMA/133 Jan 22 15:08:30 my kernel: [27698.988505] ata4.00: device reported invalid CHS sector 0 Jan 22 15:08:30 my kernel: [27698.988530] ata4: EH complete Jan 22 15:09:00 my kernel: [27729.804523] ata4: lost interrupt (Status 0x50) Jan 22 15:09:00 my kernel: [27729.804542] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 22 15:09:00 my kernel: [27729.804547] ata4.00: failed command: READ DMA Jan 22 15:09:00 my kernel: [27729.804553] ata4.00: cmd c8/00:40:3f:21:04/00:00:00:00:00/e0 tag 0 dma 32768 in Jan 22 15:09:00 my kernel: [27729.804554] res 40/00:f0:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Jan 22 15:09:00 my kernel: [27729.804557] ata4.00: status: { DRDY } Jan 22 15:09:00 my kernel: [27729.804567] ata4: soft resetting link Jan 22 15:09:01 my kernel: [27729.985869] ata4.00: configured for UDMA/133 Jan 22 15:09:01 my kernel: [27729.985876] ata4.00: device reported invalid CHS sector 0 Jan 22 15:09:01 my kernel: [27729.985889] ata4: EH complete Jan 22 15:09:31 my kernel: [27760.816048] ata4: lost interrupt (Status 0x50) Jan 22 15:09:31 my kernel: [27760.816069] ata4.00: limiting speed to UDMA/100:PIO4 Jan 22 15:09:31 my kernel: [27760.816073] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 22 15:09:31 my kernel: [27760.816077] ata4.00: failed command: READ DMA Jan 22 15:09:31 my kernel: [27760.816083] ata4.00: cmd c8/00:48:7f:21:04/00:00:00:00:00/e0 tag 0 dma 36864 in Jan 22 15:09:31 my kernel: [27760.816085] res 40/00:f0:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Jan 22 15:09:31 my kernel: [27760.816087] ata4.00: status: { DRDY } Jan 22 15:09:31 my kernel: [27760.816098] ata4: soft resetting link Jan 22 15:09:32 my kernel: [27760.996711] ata4.00: configured for UDMA/100 Jan 22 15:09:32 my kernel: [27760.996719] ata4.00: device reported invalid CHS sector 0 Jan 22 15:09:32 my kernel: [27760.996740] ata4: EH complete Jan 22 15:10:02 my kernel: [27791.804530] ata4: lost interrupt (Status 0x50) Jan 22 15:10:02 my kernel: [27791.804553] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 22 15:10:02 my kernel: [27791.804560] ata4.00: failed command: READ DMA Jan 22 15:10:02 my kernel: [27791.804566] ata4.00: cmd c8/00:50:c7:7c:08/00:00:00:00:00/e0 tag 0 dma 40960 in Jan 22 15:10:02 my kernel: [27791.804567] res 40/00:f0:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Jan 22 15:10:02 my kernel: [27791.804570] ata4.00: status: { DRDY } Jan 22 15:10:02 my kernel: [27791.804582] ata4: soft resetting link Jan 22 15:10:03 my kernel: [27791.988297] ata4.00: configured for UDMA/100 Jan 22 15:10:03 my kernel: [27791.988308] ata4.00: device reported invalid CHS sector 0 Jan 22 15:10:03 my kernel: [27791.988332] ata4: EH complete Jan 22 15:10:33 my kernel: [27822.804521] ata4: lost interrupt (Status 0x50) Jan 22 15:10:33 my kernel: [27822.804539] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 22 15:10:33 my kernel: [27822.804544] ata4.00: failed command: READ DMA EXT Jan 22 15:10:33 my kernel: [27822.804550] ata4.00: cmd 25/00:38:7f:20:8a/00:00:4d:00:00/e0 tag 0 dma 28672 in Jan 22 15:10:33 my kernel: [27822.804551] res 40/00:f0:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Jan 22 15:10:33 my kernel: [27822.804554] ata4.00: status: { DRDY } Jan 22 15:10:33 my kernel: [27822.804565] ata4: soft resetting link Jan 22 15:10:34 my kernel: [27822.989794] ata4.00: configured for UDMA/100 Jan 22 15:10:34 my kernel: [27822.989800] ata4.00: device reported invalid CHS sector 0 Jan 22 15:10:34 my kernel: [27822.989814] ata4: EH complete Jan 22 15:11:04 my kernel: [27853.820104] ata4: lost interrupt (Status 0x50) Jan 22 15:11:04 my kernel: [27853.820132] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 22 15:11:04 my kernel: [27853.820137] ata4.00: failed command: READ DMA Jan 22 15:11:04 my kernel: [27853.820142] ata4.00: cmd c8/00:40:3f:28:04/00:00:00:00:00/e0 tag 0 dma 32768 in Jan 22 15:11:04 my kernel: [27853.820143] res 40/00:f0:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Jan 22 15:11:04 my kernel: [27853.820145] ata4.00: status: { DRDY } Jan 22 15:11:04 my kernel: [27853.820156] ata4: soft resetting link Jan 22 15:11:05 my kernel: [27854.004474] ata4.00: configured for UDMA/100 Jan 22 15:11:05 my kernel: [27854.004482] ata4.00: device reported invalid CHS sector 0 Jan 22 15:11:05 my kernel: [27854.004503] ata4: EH complete Jan 22 15:11:35 my kernel: [27884.804540] ata4: lost interrupt (Status 0x50) Jan 22 15:11:35 my kernel: [27884.804566] ata4.00: limiting speed to UDMA/33:PIO4 Jan 22 15:11:35 my kernel: [27884.804570] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 22 15:11:35 my kernel: [27884.804576] ata4.00: failed command: READ DMA Jan 22 15:11:35 my kernel: [27884.804582] ata4.00: cmd c8/00:80:7f:28:04/00:00:00:00:00/e0 tag 0 dma 65536 in Jan 22 15:11:35 my kernel: [27884.804583] res 40/00:f0:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Jan 22 15:11:35 my kernel: [27884.804586] ata4.00: status: { DRDY } Jan 22 15:11:35 my kernel: [27884.804598] ata4: soft resetting link Jan 22 15:11:36 my kernel: [27884.984946] ata4.00: configured for UDMA/33 Jan 22 15:11:36 my kernel: [27884.984953] ata4.00: device reported invalid CHS sector 0 Jan 22 15:11:36 my kernel: [27884.984971] ata4: EH complete Jan 22 15:12:06 my kernel: [27915.804529] ata4: lost interrupt (Status 0x50) Jan 22 15:12:06 my kernel: [27915.804548] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 22 15:12:06 my kernel: [27915.804554] ata4.00: failed command: READ DMA Jan 22 15:12:06 my kernel: [27915.804559] ata4.00: cmd c8/00:80:7f:28:04/00:00:00:00:00/e0 tag 0 dma 65536 in Jan 22 15:12:06 my kernel: [27915.804561] res 40/00:f0:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) Jan 22 15:12:06 my kernel: [27915.804564] ata4.00: status: { DRDY } Jan 22 15:12:06 my kernel: [27915.804575] ata4: soft resetting link Jan 22 15:12:07 my kernel: [27915.984902] ata4.00: configured for UDMA/33 Jan 22 15:12:07 my kernel: [27915.984909] ata4.00: device reported invalid CHS sector 0 Jan 22 15:12:07 my kernel: [27915.984927] ata4: EH complete Jan 22 15:12:52 my kernel: [27961.780543] cupsd[1898]: segfault at 3cf3b ip 000000000003cf3b sp 00007fff28af19d8 error 14 in libnss_files-2.11.2.so[7ffb50975000+b000] Jan 22 15:13:45 my kernel: [28014.828243] [UFW BLOCK] IN=eth0 OUT= MAC=00:11:92:86:8d:f8:00:1c:f0:4c:c2:b9:08:00 SRC=92.33.33.179 DST=192.168.0.198 LEN=40 TOS=0x00 PREC=0x00 TTL=58 ID=0 DF PROTO=TCP SPT=80 DPT=39734 WINDOW=0 RES=0x00 RST URGP=0 Jan 22 15:13:46 my kernel: [28014.868831] [UFW BLOCK] IN=eth0 OUT= MAC=00:11:92:86:8d:f8:00:1c:f0:4c:c2:b9:08:00 SRC=195.54.111.91 DST=192.168.0.198 LEN=40 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=TCP SPT=80 DPT=36214 WINDOW=0 RES=0x00 RST URGP=0 Jan 22 15:13:46 my kernel: [28014.881609] [UFW BLOCK] IN=eth0 OUT= MAC=00:11:92:86:8d:f8:00:1c:f0:4c:c2:b9:08:00 SRC=74.125.79.99 DST=192.168.0.198 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=50371 PROTO=TCP SPT=80 DPT=37642 WINDOW=0 RES=0x00 RST URGP=0 Jan 22 15:13:46 my kernel: [28014.892944] [UFW BLOCK] IN=eth0 OUT= MAC=00:11:92:86:8d:f8:00:1c:f0:4c:c2:b9:08:00 SRC=74.125.79.99 DST=192.168.0.198 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=37335 PROTO=TCP SPT=80 DPT=37625 WINDOW=0 RES=0x00 RST URGP=0 Jan 22 15:13:46 my kernel: [28014.897322] [UFW BLOCK] IN=eth0 OUT= MAC=00:11:92:86:8d:f8:00:1c:f0:4c:c2:b9:08:00 SRC=74.125.79.99 DST=192.168.0.198 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=34042 PROTO=TCP SPT=80 DPT=37626 WINDOW=0 RES=0x00 RST URGP=0 Jan 22 15:13:46 my kernel: [28014.925305] [UFW BLOCK] IN=eth0 OUT= MAC=00:11:92:86:8d:f8:00:1c:f0:4c:c2:b9:08:00 SRC=74.125.79.118 DST=192.168.0.198 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=23674 PROTO=TCP SPT=80 DPT=36969 WINDOW=0 RES=0x00 RST URGP=0 Jan 22 15:13:46 my kernel: [28014.933365] [UFW BLOCK] IN=eth0 OUT= MAC=00:11:92:86:8d:f8:00:1c:f0:4c:c2:b9:08:00 SRC=74.125.79.99 DST=192.168.0.198 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=39469 PROTO=TCP SPT=80 DPT=37640 WINDOW=0 RES=0x00 RST URGP=0 Jan 22 15:13:46 my kernel: [28014.934029] [UFW BLOCK] IN=eth0 OUT= MAC=00:11:92:86:8d:f8:00:1c:f0:4c:c2:b9:08:00 SRC=74.125.79.99 DST=192.168.0.198 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=34532 PROTO=TCP SPT=80 DPT=37641 WINDOW=0 RES=0x00 RST URGP=0 Jan 22 15:13:46 my kernel: [28014.941446] [UFW BLOCK] IN=eth0 OUT= MAC=00:11:92:86:8d:f8:00:1c:f0:4c:c2:b9:08:00 SRC=74.125.79.99 DST=192.168.0.198 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=54104 PROTO=TCP SPT=80 DPT=37639 WINDOW=0 RES=0x00 RST URGP=0 Jan 22 15:13:46 my kernel: [28015.284273] [UFW BLOCK] IN=eth0 OUT= MAC=00:11:92:86:8d:f8:00:1c:f0:4c:c2:b9:08:00 SRC=92.33.33.179 DST=192.168.0.198 LEN=40 TOS=0x00 PREC=0x00 TTL=58 ID=0 DF PROTO=TCP SPT=80 DPT=39734 WINDOW=0 RES=0x00 RST URGP=0 Jan 22 15:14:14 my kernel: [28043.604663] [UFW BLOCK] IN=eth0 OUT= MAC=00:11:92:86:8d:f8:00:1c:f0:4c:c2:b9:08:00 SRC=195.54.111.91 DST=192.168.0.198 LEN=40 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=TCP SPT=80 DPT=36214 WINDOW=0 RES=0x00 RST URGP=0 Jan 22 15:14:43 my kernel: [28072.785223] [UFW BLOCK] IN=eth0 OUT= MAC=00:11:92:86:8d:f8:00:1c:f0:4c:c2:b9:08:00 SRC=195.54.111.91 DST=192.168.0.198 LEN=40 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=TCP SPT=80 DPT=36214 WINDOW=0 RES=0x00 RST URGP=0 Jan 22 15:14:51 my kernel: [28079.949488] [UFW BLOCK] IN=eth0 OUT= MAC=00:11:92:86:8d:f8:00:1c:f0:4c:c2:b9:08:00 SRC=74.125.79.118 DST=192.168.0.198 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=23681 PROTO=TCP SPT=80 DPT=36969 WINDOW=0 RES=0x00 RST URGP=0 Jan 22 16:56:43 my kernel: [34192.816023] ata4: lost interrupt (Status 0x50) Jan 22 16:56:43 my kernel: [34192.816040] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 22 16:56:43 my kernel: [34192.816044] ata4.00: failed command: WRITE DMA EXT Jan 22 16:56:43 my kernel: [34192.816048] ata4.00: cmd 35/00:08:bf:00:80/00:00:4d:00:00/e0 tag 0 dma 4096 out Jan 22 16:56:43 my kernel: [34192.816049] res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout) Jan 22 16:56:43 my kernel: [34192.816051] ata4.00: status: { DRDY } Jan 22 16:56:43 my kernel: [34192.816060] ata4: soft resetting link Jan 22 16:56:44 my kernel: [34192.996387] ata4.00: configured for UDMA/33 Jan 22 16:56:44 my kernel: [34192.996392] ata4.00: device reported invalid CHS sector 0 Jan 22 16:56:44 my kernel: [34192.996402] ata4: EH complete -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
