Hello, On 12/14/2009 09:29 PM, Xavier wrote: >> I am just wondering : does it really matter in which laptop that disk >> is used ? As laptop disk can be changed/replaced easily, this also >> sounds strange to me, but there might be a good reason I am missing :) OEMs sometimes load specialized firmwares to drives and BIOS may configure APM differently according to drive model, so it kind of matters. > Was it the right place for this information ? > I added the two people who committed to storage-fixup git, just in case. storage-fixup is at best a stop-gap measure until something better and more intelligent comes along. It might be able to serve as documentation later on too. I don't think it would be wise to configure APM to certain value after matching only the drive model. That's too wide. A good solution would be... * Build database of load cycle limits and useable APM values on drive models. * Monitor load cycle count by smart commands and if it continues to increase at an excessive rate, warn the user and configure higher APM value. If you replaced the drive yourself, putting hdparm command in one of boot scripts should do it for now. :-( Thanks. -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html