Re: SiI3811 PATA->SATA bridge not working on OpenRD-Base

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

cc'ing Mark and quoting whole body.  Mark, sata_mv timing problem.
Can you please handle this one?

Thanks.

On 12/15/2009 04:59 AM, Sascha Silbe wrote:
> On Tue, Dec 01, 2009 at 03:08:08PM +0900, Tejun Heo wrote:
>> In libata-sff.c there are several places which set AC_ERR_HSM.  They
>> store the reason why they're setting it using ata_eh_push_desc() but
>> for EH commands those messages aren't printed out (we probably need to
>> fix that).  Anyways, can you please conver those to printk's and see
>> which one is setting HSM error?
> OK, this got me going, thanks! I couldn't find where AC_ERR_HSM is set,
> but sata_mv now told me about the IORDY timeout. It seems the IDE<->SATA
> converter is slower than the internal native SATA HD, but probably (see
> below) still within spec.
> 
> mv_soc_reset_hc_port() sets EDMA_IORDY_TMOUT to the default value of
> 0xBC which assumes a 150MHz clock. After setting it to 0xFA (which
> assumes a 200MHz clock) the device works fine (at least with hdparm -tT).
> 
> Clock description for the 88F6281 (the SoC on the OpenRD-Base) is
> incomplete and/or messy in the published documents (Functional
> Specifications and Hardware Specifications), so I'm not quite sure what
> the right value is:
> - Hardware Specifications defines TCLK/Core clock as 200MHz and SATA
> clock as 150MHz
> - stock UBoot (i.e. Marvell version) prints 400MHz for "SysClock" and
> 200MHz for "TClock"
> - Functional Specifications says eIORdyTimeout is the "number of system
> cycles", giving 0xBC for "SysClock == 150MHz"
> 
> So depending on what exactly the clock source for the IORDY timeout is,
> the correct value should be one of:
> - 0x00BC (150MHz, SATA clock from Hardware Specifications; implying the
> device is too slow so unlikely as it works fine with other hosts)
> - 0x00FA (200MHz, TCLK from Hardware Specifications)
> - 0x01F4 (400MHz, SysClock from UBoot)

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux