Tejun Heo wrote:
What changes happened between .27 and .28 could've caused this?
Anyways, below is what I get now (with your patch), including the
frequency of occurrence.
I have no idea and I'm afraid we'll need a bisection here. :-( Can you
please try the attached patch?
Thanks.
I applied the patch and get the following:
ata2: XXX status=50 after 100 tries
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: ST_FIRST: !(DRQ|ERR|DF)
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
ata2.00: status: { DRDY }
ata2: soft resetting link
ata2.00: configured for UDMA/33
ata2: EH complete
I tried to git bisect the problem. First time I thought the error was
between rc2 and rc3,
but the bisect gave inconclusive results because I couldn't tell for
sure a good commit from a bad.
I tried again with .27 to .28-rc3, but I was unable to bisect because of
compile errors (in pre-rc1),
and doing git bisect skip, again landed on a commit with compile errors.
Unless you can think of anything else, I'm just going to wait and see if
a commit in .29 will fix the problem.
Justin Madru
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
