Re: disabling sata_nv ADMA for 2.6.24

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tejun Heo wrote:
> Robert Hancock wrote:
>>> Okay, just succeeded on the current #upstream-fixes, attaching the log.
>>>  The machine is a brick after the crash.
>> I assume the cable got reconnected at 325 seconds? It looks like that
>> was during error handling for the previous unplug?
> 
> I don't remember too well (the console was more than two meters away and
> I was just keeping disconnecting and reconnecting.  I noticed the
> machine was frozen after I came back to console, so...
> 
>> [  314.987885] ata3: timeout waiting for ADMA IDLE, stat=0x400
>> [  314.993556] ata3: timeout waiting for ADMA LEGACY, stat=0x400
>> [  315.009915] ata3.00: exception Emask 0x10 SAct 0x1 SErr 0x1910000
>> action 0xa frozen
>> [  315.017708] ata3.00: ADMA status 0x00000402: , hot unplug
>> [  315.017714] ata3: SError: { PHYRdyChg Dispar LinkSeq TrStaTrns }
>> [  315.029239] ata3.00: cmd 60/01:00:92:d7:12/00:00:05:00:00/40 tag 0
>> ncq 512 in
>> [  315.029240]          res 40/00:04:92:d7:12/00:04:92:d7:12/40 Emask
>> 0x10 (ATA bus error)
>> [  315.029243] ata3.00: status: { DRDY }
>> [  315.048236] ata3: hard resetting link
>> [  315.774982] ata3: SATA link down (SStatus 0 SControl 300)
>> [  315.780498] ata3: failed to recover some devices, retrying in 5 secs
>> [  320.788427] ata3: hard resetting link
>> [  325.242220] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> Not sure if the port would be frozen at this point or not?
>>
>> It would be useful to add some printks to narrow down at what point the
>> lockup happens. If it's a loop, interrupt storm or something then we can
>> likely fix it, but if the controller's just locking up then we may be
>> out of luck..
> 
> I think it's machine hard lock up.  NMI watchdog doesn't get triggered.
> 

Ah.. another thing.  Sometimes when I swap two drives, sata_nv fails to
detect the new drive.  If I pull out the plug and replug it, it then
recognizes the new drive.

-- 
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux