On Mon, 19 Mar 2007 20:56:23 -0800, Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> wrote: > > Temporarily at > > http://userweb.kernel.org/~akpm/2.6.21-rc4-mm1/ > Libata seems to misdetect my cable. I have double-checked and the cable is 80 pin... ata1 is PATA ICH5 bus 1 with DVD-RW + ZIP and 40 pin cable ata2 is PATA ICH5 bus 2 with extra HD + DVD and 80 pin cable ata3 is real SATA ICH5 with boot HD (mm, I chaged bios settings to get the box booting from the SATA disk) werewolf:~# lsscsi [0:0:0:0] cd/dvd HL-DT-ST DVDRAM GSA-H10N JL12 /dev/.tmp-11-0 [0:0:1:0] disk IOMEGA ZIP 250 51.G /dev/sda [1:0:0:0] disk ATA ST3120022A 3.06 /dev/sdb [1:0:1:0] cd/dvd TOSHIBA DVD-ROM SD-M1712 1004 /dev/sr1 [2:0:0:0] disk ATA ST3200822AS 3.01 /dev/sdc ata_piix 0000:00:1f.1: version 2.10ac1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 scsi0 : ata_piix ata1.00: ATAPI, max UDMA/33 ata1.01: ATAPI, max MWDMA0, CDB intr ata1.00: configured for UDMA/33 ata1.01: configured for PIO3 scsi1 : ata_piix ata2.00: ATA-6: ST3120022A, 3.06, max UDMA/100 ata2.00: 234441648 sectors, multi 16: LBA48 ata2.01: ATAPI, max UDMA/33 ata2.00: limited to UDMA/33 due to 40-wire cable <======================= ata2.00: configured for UDMA/33 ata2.01: configured for UDMA/33 scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL12 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 scsi 0:0:1:0: Direct-Access IOMEGA ZIP 250 51.G PQ: 0 ANSI: 5 sd 0:0:1:0: [sda] Attached SCSI removable disk scsi 1:0:0:0: Direct-Access ATA ST3120022A 3.06 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk scsi 1:0:1:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5 sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray sr 1:0:1:0: Attached scsi CD-ROM sr1 Any ideas ? -- J.A. Magallon <jamagallon()ono!com> \ Software is like sex: \ It's better when it's free Mandriva Linux release 2007.1 (Cooker) for i586 Linux 2.6.20-jam05 (gcc 4.1.2 20070302 (prerelease) (4.1.2-1mdv2007.1)) #1 SMP PREEMPT - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
