Hello,
> Please match the firmware version as well for the Maxtor drives
Ok.
> > --- linux-2.6.21-rc4/drivers/ata/libata-core.c 2007-03-17
> 19:29:45.000000000
> > +0100
> > +++ linux-2.6.21-rc4-Maxtor/drivers/ata/libata-core.c 2007-03-17
> > 19:37:28.000000000 +0100
> > @@ -3359,6 +3359,8 @@
> > { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
> > /* http://thread.gmane.org/gmane.linux.ide/14907 */
> > { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
> > + /* NCQ is broken */
> > + { "Maxtor 6L250S0", NULL,
> ATA_HORKAGE_NONCQ },
> >
> > /* Devices with NCQ limits */
> >
> >
> > Signed-off-by: Paul Rolland <rol@xxxxxxxxxx>
>
> NAK - but add the firmware to the match and you can have an Ack 8)
Second try, compiled _and_ boot tested, of course.
dmesg says :
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133
ata1.00: 490234752 sectors, multi 0: LBA48 NCQ (not used)
ata1.00: configured for UDMA/133
--- linux-2.6.21-rc4/drivers/ata/libata-core.c 2007-03-17 19:47:49.000000000
+0100
+++ linux-2.6.21-rc4-Maxtor/drivers/ata/libata-core.c 2007-03-17
20:24:01.000000000 +0100
@@ -3359,6 +3359,8 @@
{ "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
/* http://thread.gmane.org/gmane.linux.ide/14907 */
{ "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
+ /* NCQ is broken */
+ { "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ },
/* Devices with NCQ limits */
Signed-off-by: Paul Rolland <rol@xxxxxxxxxx>
Regards,
Paul
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
