Re: sata_promise SATA300TX4 "intermittent problems"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi again,

Peter Favrholdt wrote:
My feeling is this is not caused by 1.5Gbps or 3.0Gbps operation.
<...snip>
My next test will be a plain 2.6.21rc2. Then I'll apply the patches one by one.

I've tested 2.6.21-rc2 which fails (sdc down after 27 minutes & sdd down after 46 minutes).

Then I applied just a single patch to 2.6.21-rc2: Mikael Petterssons patch to force 1.5Gbps operation and tested again - this time no problems at all!

(BTW: both kernels are running with IO-APIC disabled).

I've put results+dmesg output here: http://sata300tx4.gratiswiki.dk/

Best regards,

Peter

-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux