[PATCH] pata_atiixp: Restore the cable method

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Alan Cox <alan@xxxxxxxxxx>

diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.21-rc3-mm2/drivers/ata/pata_atiixp.c linux-2.6.21-rc3-mm2/drivers/ata/pata_atiixp.c
--- linux.vanilla-2.6.21-rc3-mm2/drivers/ata/pata_atiixp.c	2007-03-08 16:01:10.000000000 +0000
+++ linux-2.6.21-rc3-mm2/drivers/ata/pata_atiixp.c	2007-03-08 16:21:08.000000000 +0000
@@ -22,7 +22,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_atiixp"
-#define DRV_VERSION "0.4.4"
+#define DRV_VERSION "0.4.5"
 
 enum {
 	ATIIXP_IDE_PIO_TIMING	= 0x40,
@@ -35,23 +35,13 @@
 
 static int atiixp_pre_reset(struct ata_port *ap, unsigned long deadline)
 {
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	static const struct pci_bits atiixp_enable_bits[] = {
 		{ 0x48, 1, 0x01, 0x00 },
 		{ 0x48, 1, 0x08, 0x00 }
 	};
-	u8 udma;
-
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
 		return -ENOENT;
-
-	/* Hack from drivers/ide/pci. Really we want to know how to do the
-	   raw detection not play follow the bios mode guess */
-	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
-	if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
-		ap->cbl = ATA_CBL_PATA80;
-	else
-		ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap, deadline);
 }
 
@@ -60,6 +50,19 @@
 	ata_bmdma_drive_eh(ap, atiixp_pre_reset, ata_std_softreset, NULL,   ata_std_postreset);
 }
 
+static int atiixp_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 udma;
+
+	/* Hack from drivers/ide/pci. Really we want to know how to do the
+	   raw detection not play follow the bios mode guess */
+	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
+	if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
+		return  ATA_CBL_PATA80;
+	return ATA_CBL_PATA40;
+}
+
 /**
  *	atiixp_set_pio_timing	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -245,6 +248,7 @@
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= atiixp_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= atiixp_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= atiixp_bmdma_start,
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux