Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.21-rc3-mm2/drivers/ata/pata_ali.c linux-2.6.21-rc3-mm2/drivers/ata/pata_ali.c
--- linux.vanilla-2.6.21-rc3-mm2/drivers/ata/pata_ali.c 2007-03-08 16:01:10.000000000 +0000
+++ linux-2.6.21-rc3-mm2/drivers/ata/pata_ali.c 2007-03-08 16:17:44.000000000 +0000
@@ -34,7 +34,7 @@
#include <linux/dmi.h>
#define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.3"
+#define DRV_VERSION "0.7.4"
/*
* Cable special cases
@@ -90,61 +90,6 @@
}
/**
- * ali_early_error_handler - reset for eary chip
- * @ap: ATA port
- * @deadline: deadline jiffies for the operation
- *
- * Handle the reset callback for the later chips with cable detect
- */
-
-static int ali_c2_pre_reset(struct ata_port *ap, unsigned long deadline)
-{
- ap->cbl = ali_c2_cable_detect(ap);
- return ata_std_prereset(ap, deadline);
-}
-
-static void ali_c2_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ali_c2_pre_reset,
- ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-/**
- * ali_early_cable_detect - cable detection
- * @ap: ATA port
- *
- * Perform cable detection for older chipsets. This turns out to be
- * rather easy to implement
- */
-
-static int ali_early_cable_detect(struct ata_port *ap)
-{
- return ATA_CBL_PATA40;
-}
-
-/**
- * ali_early_probe_init - reset for early chip
- * @ap: ATA port
- * @deadline: deadline jiffies for the operation
- *
- * Handle the reset callback for the early (pre cable detect) chips.
- */
-
-static int ali_early_pre_reset(struct ata_port *ap, unsigned long deadline)
-{
- ap->cbl = ali_early_cable_detect(ap);
- return ata_std_prereset(ap, deadline);
-}
-
-static void ali_early_error_handler(struct ata_port *ap)
-{
- return ata_bmdma_drive_eh(ap, ali_early_pre_reset,
- ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-/**
* ali_20_filter - filter for earlier ALI DMA
* @ap: ALi ATA port
* @adev: attached device
@@ -153,7 +98,7 @@
* fix that later on. Also ensure we do not do UDMA on WDC drives
*/
-static unsigned long ali_20_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long ali_20_filter(struct ata_device *adev, unsigned long mask)
{
char model_num[ATA_ID_PROD_LEN + 1];
/* No DMA on anything but a disk for now */
@@ -162,7 +107,7 @@
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
if (strstr(model_num, "WDC"))
return mask &= ~ATA_MASK_UDMA;
- return ata_pci_default_filter(ap, adev, mask);
+ return ata_pci_default_filter(adev, mask);
}
/**
@@ -316,7 +261,6 @@
/**
* ali_lock_sectors - Keep older devices to 255 sector mode
- * @ap: ATA port
* @adev: Device
*
* Called during the bus probe for each device that is found. We use
@@ -368,8 +312,9 @@
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_early_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -404,8 +349,9 @@
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_early_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -442,8 +388,9 @@
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_c2_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ali_c2_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -479,8 +426,9 @@
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ali_c2_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ali_c2_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
