[PATCH] ide: move IDE settings handling to ide-proc.c
* move
__ide_add_setting()
ide_add_setting()
__ide_remove_setting()
auto_remove_settings()
ide_find_setting_by_name()
ide_read_setting()
ide_write_setting()
set_xfer_rate()
ide_add_generic_settings()
ide_register_subdriver()
ide_unregister_subdriver()
from ide.c to ide-proc.c
* set_{io_32bit,pio_mode,using_dma}() cannot be marked static now, fix it
* rename ide_[un]register_subdriver() to ide_proc_[un]register_driver(),
update device drivers to use new names
* add CONFIG_IDE_PROC_FS=n versions of ide_proc_[un]register_driver()
and ide_add_generic_settings()
* make ide_find_setting_by_name(), ide_{read,write}_setting()
and ide_{add,remove}_proc_entries() static
* cover IDE settings code in device drivers with CONFIG_IDE_PROC_FS #ifdef,
also while at it cover with CONFIG_IDE_PROC_FS #ifdef ide_driver_t.proc
* remove bogus comment from ide.h
* cover with CONFIG_IDE_PROC_FS #ifdef .proc and .settings in ide_drive_t
Besides saner code this patch results in the IDE core smaller by ~2 kB
(on x86-32) and IDE disk driver by ~1 kB (ditto) when CONFIG_IDE_PROC_FS=n.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/ide-cd.c | 14 +-
drivers/ide/ide-disk.c | 16 +-
drivers/ide/ide-floppy.c | 16 +-
drivers/ide/ide-proc.c | 310 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/ide/ide-tape.c | 17 +-
drivers/ide/ide.c | 313 -----------------------------------------------
drivers/scsi/ide-scsi.c | 16 +-
include/linux/ide.h | 39 +++--
8 files changed, 378 insertions(+), 363 deletions(-)
Index: b/drivers/ide/ide-cd.c
===================================================================
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -3050,10 +3050,14 @@ int ide_cdrom_probe_capabilities (ide_dr
return nslots;
}
+#ifdef CONFIG_IDE_PROC_FS
static void ide_cdrom_add_settings(ide_drive_t *drive)
{
ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL);
}
+#else
+static inline void ide_cdrom_add_settings(ide_drive_t *drive) { ; }
+#endif
/*
* standard prep_rq_fn that builds 10 byte cmds
@@ -3282,7 +3286,7 @@ static void ide_cd_remove(ide_drive_t *d
{
struct cdrom_info *info = drive->driver_data;
- ide_unregister_subdriver(drive, info->driver);
+ ide_proc_unregister_driver(drive, info->driver);
del_gendisk(info->disk);
@@ -3327,8 +3331,6 @@ static ide_proc_entry_t idecd_proc[] = {
{ "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL },
{ NULL, 0, NULL, NULL }
};
-#else
-# define idecd_proc NULL
#endif
static ide_driver_t ide_cdrom_driver = {
@@ -3346,7 +3348,9 @@ static ide_driver_t ide_cdrom_driver = {
.end_request = ide_end_request,
.error = __ide_error,
.abort = __ide_abort,
+#ifdef CONFIG_IDE_PROC_FS
.proc = idecd_proc,
+#endif
};
static int idecd_open(struct inode * inode, struct file * file)
@@ -3508,7 +3512,7 @@ static int ide_cd_probe(ide_drive_t *dri
ide_init_disk(g, drive);
- ide_register_subdriver(drive, &ide_cdrom_driver);
+ ide_proc_register_driver(drive, &ide_cdrom_driver);
kref_init(&info->kref);
@@ -3525,7 +3529,7 @@ static int ide_cd_probe(ide_drive_t *dri
g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
if (ide_cdrom_setup(drive)) {
struct cdrom_device_info *devinfo = &info->devinfo;
- ide_unregister_subdriver(drive, &ide_cdrom_driver);
+ ide_proc_unregister_driver(drive, &ide_cdrom_driver);
kfree(info->buffer);
kfree(info->toc);
kfree(info->changer_info);
Index: b/drivers/ide/ide-disk.c
===================================================================
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -562,7 +562,6 @@ static sector_t idedisk_capacity (ide_dr
}
#ifdef CONFIG_IDE_PROC_FS
-
static int smart_enable(ide_drive_t *drive)
{
ide_task_t args;
@@ -680,11 +679,6 @@ static ide_proc_entry_t idedisk_proc[] =
{ "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_smart_thresholds, NULL },
{ NULL, 0, NULL, NULL }
};
-
-#else
-
-#define idedisk_proc NULL
-
#endif /* CONFIG_IDE_PROC_FS */
static void idedisk_prepare_flush(request_queue_t *q, struct request *rq)
@@ -883,6 +877,7 @@ static int set_lba_addressing(ide_drive_
return 0;
}
+#ifdef CONFIG_IDE_PROC_FS
static void idedisk_add_settings(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
@@ -900,6 +895,9 @@ static void idedisk_add_settings(ide_dri
ide_add_setting(drive, "failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, &drive->failures, NULL);
ide_add_setting(drive, "max_failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, &drive->max_failures, NULL);
}
+#else
+static inline void idedisk_add_settings(ide_drive_t *drive) { ; }
+#endif
static void idedisk_setup (ide_drive_t *drive)
{
@@ -1018,7 +1016,7 @@ static void ide_disk_remove(ide_drive_t
struct ide_disk_obj *idkp = drive->driver_data;
struct gendisk *g = idkp->disk;
- ide_unregister_subdriver(drive, idkp->driver);
+ ide_proc_unregister_driver(drive, idkp->driver);
del_gendisk(g);
@@ -1083,7 +1081,9 @@ static ide_driver_t idedisk_driver = {
.end_request = ide_end_request,
.error = __ide_error,
.abort = __ide_abort,
+#ifdef CONFIG_IDE_PROC_FS
.proc = idedisk_proc,
+#endif
};
static int idedisk_open(struct inode *inode, struct file *filp)
@@ -1259,7 +1259,7 @@ static int ide_disk_probe(ide_drive_t *d
ide_init_disk(g, drive);
- ide_register_subdriver(drive, &idedisk_driver);
+ ide_proc_register_driver(drive, &idedisk_driver);
kref_init(&idkp->kref);
Index: b/drivers/ide/ide-floppy.c
===================================================================
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -1811,6 +1811,7 @@ static int idefloppy_identify_device (id
return 0;
}
+#ifdef CONFIG_IDE_PROC_FS
static void idefloppy_add_settings(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
@@ -1823,6 +1824,9 @@ static void idefloppy_add_settings(ide_d
ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL);
ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &floppy->ticks, NULL);
}
+#else
+static inline void idefloppy_add_settings(ide_drive_t *drive) { ; }
+#endif
/*
* Driver initialization.
@@ -1873,7 +1877,7 @@ static void ide_floppy_remove(ide_drive_
idefloppy_floppy_t *floppy = drive->driver_data;
struct gendisk *g = floppy->disk;
- ide_unregister_subdriver(drive, floppy->driver);
+ ide_proc_unregister_driver(drive, floppy->driver);
del_gendisk(g);
@@ -1893,7 +1897,6 @@ static void ide_floppy_release(struct kr
}
#ifdef CONFIG_IDE_PROC_FS
-
static int proc_idefloppy_read_capacity
(char *page, char **start, off_t off, int count, int *eof, void *data)
{
@@ -1909,11 +1912,6 @@ static ide_proc_entry_t idefloppy_proc[]
{ "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
{ NULL, 0, NULL, NULL }
};
-
-#else
-
-#define idefloppy_proc NULL
-
#endif /* CONFIG_IDE_PROC_FS */
static int ide_floppy_probe(ide_drive_t *);
@@ -1933,7 +1931,9 @@ static ide_driver_t idefloppy_driver = {
.end_request = idefloppy_do_end_request,
.error = __ide_error,
.abort = __ide_abort,
+#ifdef CONFIG_IDE_PROC_FS
.proc = idefloppy_proc,
+#endif
};
static int idefloppy_open(struct inode *inode, struct file *filp)
@@ -2159,7 +2159,7 @@ static int ide_floppy_probe(ide_drive_t
ide_init_disk(g, drive);
- ide_register_subdriver(drive, &idefloppy_driver);
+ ide_proc_register_driver(drive, &idefloppy_driver);
kref_init(&floppy->kref);
Index: b/drivers/ide/ide-proc.c
===================================================================
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -3,6 +3,8 @@
*
* Copyright (C) 1997-1998 Mark Lord
* Copyright (C) 2003 Red Hat <alan@xxxxxxxxxx>
+ *
+ * Some code was moved here from ide.c, see it for original copyrights.
*/
/*
@@ -122,6 +124,265 @@ static int proc_ide_read_identify
PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
}
+/**
+ * __ide_add_setting - add an ide setting option
+ * @drive: drive to use
+ * @name: setting name
+ * @rw: true if the function is read write
+ * @data_type: type of data
+ * @min: range minimum
+ * @max: range maximum
+ * @mul_factor: multiplication scale
+ * @div_factor: divison scale
+ * @data: private data field
+ * @set: setting
+ * @auto_remove: setting auto removal flag
+ *
+ * Removes the setting named from the device if it is present.
+ * The function takes the settings_lock to protect against
+ * parallel changes. This function must not be called from IRQ
+ * context. Returns 0 on success or -1 on failure.
+ *
+ * BUGS: This code is seriously over-engineered. There is also
+ * magic about how the driver specific features are setup. If
+ * a driver is attached we assume the driver settings are auto
+ * remove.
+ */
+
+static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set, int auto_remove)
+{
+ ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL;
+
+ down(&ide_setting_sem);
+ while ((*p) && strcmp((*p)->name, name) < 0)
+ p = &((*p)->next);
+ if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL)
+ goto abort;
+ if ((setting->name = kmalloc(strlen(name) + 1, GFP_KERNEL)) == NULL)
+ goto abort;
+ strcpy(setting->name, name);
+ setting->rw = rw;
+ setting->data_type = data_type;
+ setting->min = min;
+ setting->max = max;
+ setting->mul_factor = mul_factor;
+ setting->div_factor = div_factor;
+ setting->data = data;
+ setting->set = set;
+
+ setting->next = *p;
+ if (auto_remove)
+ setting->auto_remove = 1;
+ *p = setting;
+ up(&ide_setting_sem);
+ return 0;
+abort:
+ up(&ide_setting_sem);
+ kfree(setting);
+ return -1;
+}
+
+int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set)
+{
+ return __ide_add_setting(drive, name, rw, data_type, min, max, mul_factor, div_factor, data, set, 1);
+}
+
+EXPORT_SYMBOL(ide_add_setting);
+
+/**
+ * __ide_remove_setting - remove an ide setting option
+ * @drive: drive to use
+ * @name: setting name
+ *
+ * Removes the setting named from the device if it is present.
+ * The caller must hold the setting semaphore.
+ */
+
+static void __ide_remove_setting (ide_drive_t *drive, char *name)
+{
+ ide_settings_t **p, *setting;
+
+ p = (ide_settings_t **) &drive->settings;
+
+ while ((*p) && strcmp((*p)->name, name))
+ p = &((*p)->next);
+ if ((setting = (*p)) == NULL)
+ return;
+
+ (*p) = setting->next;
+
+ kfree(setting->name);
+ kfree(setting);
+}
+
+/**
+ * auto_remove_settings - remove driver specific settings
+ * @drive: drive
+ *
+ * Automatically remove all the driver specific settings for this
+ * drive. This function may not be called from IRQ context. The
+ * caller must hold ide_setting_sem.
+ */
+
+static void auto_remove_settings (ide_drive_t *drive)
+{
+ ide_settings_t *setting;
+repeat:
+ setting = drive->settings;
+ while (setting) {
+ if (setting->auto_remove) {
+ __ide_remove_setting(drive, setting->name);
+ goto repeat;
+ }
+ setting = setting->next;
+ }
+}
+
+/**
+ * ide_find_setting_by_name - find a drive specific setting
+ * @drive: drive to scan
+ * @name: setting name
+ *
+ * Scan's the device setting table for a matching entry and returns
+ * this or NULL if no entry is found. The caller must hold the
+ * setting semaphore
+ */
+
+static ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name)
+{
+ ide_settings_t *setting = drive->settings;
+
+ while (setting) {
+ if (strcmp(setting->name, name) == 0)
+ break;
+ setting = setting->next;
+ }
+ return setting;
+}
+
+/**
+ * ide_read_setting - read an IDE setting
+ * @drive: drive to read from
+ * @setting: drive setting
+ *
+ * Read a drive setting and return the value. The caller
+ * must hold the ide_setting_sem when making this call.
+ *
+ * BUGS: the data return and error are the same return value
+ * so an error -EINVAL and true return of the same value cannot
+ * be told apart
+ */
+
+static int ide_read_setting(ide_drive_t *drive, ide_settings_t *setting)
+{
+ int val = -EINVAL;
+ unsigned long flags;
+
+ if ((setting->rw & SETTING_READ)) {
+ spin_lock_irqsave(&ide_lock, flags);
+ switch(setting->data_type) {
+ case TYPE_BYTE:
+ val = *((u8 *) setting->data);
+ break;
+ case TYPE_SHORT:
+ val = *((u16 *) setting->data);
+ break;
+ case TYPE_INT:
+ val = *((u32 *) setting->data);
+ break;
+ }
+ spin_unlock_irqrestore(&ide_lock, flags);
+ }
+ return val;
+}
+
+/**
+ * ide_write_setting - read an IDE setting
+ * @drive: drive to read from
+ * @setting: drive setting
+ * @val: value
+ *
+ * Write a drive setting if it is possible. The caller
+ * must hold the ide_setting_sem when making this call.
+ *
+ * BUGS: the data return and error are the same return value
+ * so an error -EINVAL and true return of the same value cannot
+ * be told apart
+ *
+ * FIXME: This should be changed to enqueue a special request
+ * to the driver to change settings, and then wait on a sema for completion.
+ * The current scheme of polling is kludgy, though safe enough.
+ */
+
+static int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int val)
+{
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+ if (setting->set)
+ return setting->set(drive, val);
+ if (!(setting->rw & SETTING_WRITE))
+ return -EPERM;
+ if (val < setting->min || val > setting->max)
+ return -EINVAL;
+ if (ide_spin_wait_hwgroup(drive))
+ return -EBUSY;
+ switch (setting->data_type) {
+ case TYPE_BYTE:
+ *((u8 *) setting->data) = val;
+ break;
+ case TYPE_SHORT:
+ *((u16 *) setting->data) = val;
+ break;
+ case TYPE_INT:
+ *((u32 *) setting->data) = val;
+ break;
+ }
+ spin_unlock_irq(&ide_lock);
+ return 0;
+}
+
+static int set_xfer_rate (ide_drive_t *drive, int arg)
+{
+ int err;
+
+ if (arg < 0 || arg > 70)
+ return -EINVAL;
+
+ err = ide_wait_cmd(drive,
+ WIN_SETFEATURES, (u8) arg,
+ SETFEATURES_XFER, 0, NULL);
+
+ if (!err && arg) {
+ ide_set_xfer_rate(drive, (u8) arg);
+ ide_driveid_update(drive);
+ }
+ return err;
+}
+
+/**
+ * ide_add_generic_settings - generic ide settings
+ * @drive: drive being configured
+ *
+ * Add the generic parts of the system settings to the /proc files.
+ * The caller must not be holding the ide_setting_sem.
+ */
+
+void ide_add_generic_settings (ide_drive_t *drive)
+{
+/*
+ * drive setting name read/write access data type min max mul_factor div_factor data pointer set function
+ */
+ __ide_add_setting(drive, "io_32bit", drive->no_io_32bit ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1 + (SUPPORT_VLB_SYNC << 1), 1, 1, &drive->io_32bit, set_io_32bit, 0);
+ __ide_add_setting(drive, "keepsettings", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL, 0);
+ __ide_add_setting(drive, "nice1", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL, 0);
+ __ide_add_setting(drive, "pio_mode", SETTING_WRITE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode, 0);
+ __ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL, 0);
+ __ide_add_setting(drive, "using_dma", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma, 0);
+ __ide_add_setting(drive, "init_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL, 0);
+ __ide_add_setting(drive, "current_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->current_speed, set_xfer_rate, 0);
+ __ide_add_setting(drive, "number", SETTING_RW, TYPE_BYTE, 0, 3, 1, 1, &drive->dn, NULL, 0);
+}
+
static void proc_ide_settings_warn(void)
{
static int warned = 0;
@@ -404,7 +665,7 @@ static ide_proc_entry_t generic_drive_en
{ NULL, 0, NULL, NULL }
};
-void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data)
+static void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data)
{
struct proc_dir_entry *ent;
@@ -421,7 +682,7 @@ void ide_add_proc_entries(struct proc_di
}
}
-void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p)
+static void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p)
{
if (!dir || !p)
return;
@@ -431,6 +692,51 @@ void ide_remove_proc_entries(struct proc
}
}
+void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver)
+{
+ ide_add_proc_entries(drive->proc, driver->proc, drive);
+}
+
+EXPORT_SYMBOL(ide_proc_register_driver);
+
+/**
+ * ide_proc_unregister_driver - remove driver specific data
+ * @drive: drive
+ * @driver: driver
+ *
+ * Clean up the driver specific /proc files and IDE settings
+ * for a given drive.
+ *
+ * Takes ide_setting_sem and ide_lock.
+ * Caller must hold none of the locks.
+ */
+
+void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver)
+{
+ unsigned long flags;
+
+ ide_remove_proc_entries(drive->proc, driver->proc);
+
+ down(&ide_setting_sem);
+ spin_lock_irqsave(&ide_lock, flags);
+ /*
+ * ide_setting_sem protects the settings list
+ * ide_lock protects the use of settings
+ *
+ * so we need to hold both, ide_settings_sem because we want to
+ * modify the settings list, and ide_lock because we cannot take
+ * a setting out that is being used.
+ *
+ * OTOH both ide_{read,write}_setting are only ever used under
+ * ide_setting_sem.
+ */
+ auto_remove_settings(drive);
+ spin_unlock_irqrestore(&ide_lock, flags);
+ up(&ide_setting_sem);
+}
+
+EXPORT_SYMBOL(ide_proc_unregister_driver);
+
static void create_proc_ide_drives(ide_hwif_t *hwif)
{
int d;
Index: b/drivers/ide/ide-tape.c
===================================================================
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -4561,6 +4561,8 @@ static void idetape_get_blocksize_from_b
printk(KERN_INFO "ide-tape: Adjusted block size - %d\n", tape->tape_block_size);
#endif /* IDETAPE_DEBUG_INFO */
}
+
+#ifdef CONFIG_IDE_PROC_FS
static void idetape_add_settings (ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
@@ -4583,6 +4585,9 @@ static void idetape_add_settings (ide_dr
ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->avg_speed, NULL);
ide_add_setting(drive, "debug_level", SETTING_RW, TYPE_INT, 0, 0xffff, 1, 1, &tape->debug_level, NULL);
}
+#else
+static inline void idetape_add_settings(ide_drive_t *drive) { ; }
+#endif
/*
* ide_setup is called to:
@@ -4703,7 +4708,7 @@ static void ide_tape_remove(ide_drive_t
{
idetape_tape_t *tape = drive->driver_data;
- ide_unregister_subdriver(drive, tape->driver);
+ ide_proc_unregister_driver(drive, tape->driver);
ide_unregister_region(tape->disk);
@@ -4731,7 +4736,6 @@ static void ide_tape_release(struct kref
}
#ifdef CONFIG_IDE_PROC_FS
-
static int proc_idetape_read_name
(char *page, char **start, off_t off, int count, int *eof, void *data)
{
@@ -4749,11 +4753,6 @@ static ide_proc_entry_t idetape_proc[] =
{ "name", S_IFREG|S_IRUGO, proc_idetape_read_name, NULL },
{ NULL, 0, NULL, NULL }
};
-
-#else
-
-#define idetape_proc NULL
-
#endif
static int ide_tape_probe(ide_drive_t *);
@@ -4773,7 +4772,9 @@ static ide_driver_t idetape_driver = {
.end_request = idetape_end_request,
.error = __ide_error,
.abort = __ide_abort,
+#ifdef CONFIG_IDE_PROC_FS
.proc = idetape_proc,
+#endif
};
/*
@@ -4864,7 +4865,7 @@ static int ide_tape_probe(ide_drive_t *d
ide_init_disk(g, drive);
- ide_register_subdriver(drive, &idetape_driver);
+ ide_proc_register_driver(drive, &idetape_driver);
kref_init(&tape->kref);
Index: b/drivers/ide/ide.c
===================================================================
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -830,178 +830,6 @@ EXPORT_SYMBOL(ide_register_hw);
DECLARE_MUTEX(ide_setting_sem);
/**
- * __ide_add_setting - add an ide setting option
- * @drive: drive to use
- * @name: setting name
- * @rw: true if the function is read write
- * @data_type: type of data
- * @min: range minimum
- * @max: range maximum
- * @mul_factor: multiplication scale
- * @div_factor: divison scale
- * @data: private data field
- * @set: setting
- * @auto_remove: setting auto removal flag
- *
- * Removes the setting named from the device if it is present.
- * The function takes the settings_lock to protect against
- * parallel changes. This function must not be called from IRQ
- * context. Returns 0 on success or -1 on failure.
- *
- * BUGS: This code is seriously over-engineered. There is also
- * magic about how the driver specific features are setup. If
- * a driver is attached we assume the driver settings are auto
- * remove.
- */
-
-static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set, int auto_remove)
-{
- ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL;
-
- down(&ide_setting_sem);
- while ((*p) && strcmp((*p)->name, name) < 0)
- p = &((*p)->next);
- if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL)
- goto abort;
- if ((setting->name = kmalloc(strlen(name) + 1, GFP_KERNEL)) == NULL)
- goto abort;
- strcpy(setting->name, name);
- setting->rw = rw;
- setting->data_type = data_type;
- setting->min = min;
- setting->max = max;
- setting->mul_factor = mul_factor;
- setting->div_factor = div_factor;
- setting->data = data;
- setting->set = set;
-
- setting->next = *p;
- if (auto_remove)
- setting->auto_remove = 1;
- *p = setting;
- up(&ide_setting_sem);
- return 0;
-abort:
- up(&ide_setting_sem);
- kfree(setting);
- return -1;
-}
-
-int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set)
-{
- return __ide_add_setting(drive, name, rw, data_type, min, max, mul_factor, div_factor, data, set, 1);
-}
-
-EXPORT_SYMBOL(ide_add_setting);
-
-/**
- * __ide_remove_setting - remove an ide setting option
- * @drive: drive to use
- * @name: setting name
- *
- * Removes the setting named from the device if it is present.
- * The caller must hold the setting semaphore.
- */
-
-static void __ide_remove_setting (ide_drive_t *drive, char *name)
-{
- ide_settings_t **p, *setting;
-
- p = (ide_settings_t **) &drive->settings;
-
- while ((*p) && strcmp((*p)->name, name))
- p = &((*p)->next);
- if ((setting = (*p)) == NULL)
- return;
-
- (*p) = setting->next;
-
- kfree(setting->name);
- kfree(setting);
-}
-
-/**
- * ide_find_setting_by_name - find a drive specific setting
- * @drive: drive to scan
- * @name: setting name
- *
- * Scan's the device setting table for a matching entry and returns
- * this or NULL if no entry is found. The caller must hold the
- * setting semaphore
- */
-
-ide_settings_t *ide_find_setting_by_name (ide_drive_t *drive, char *name)
-{
- ide_settings_t *setting = drive->settings;
-
- while (setting) {
- if (strcmp(setting->name, name) == 0)
- break;
- setting = setting->next;
- }
- return setting;
-}
-
-/**
- * auto_remove_settings - remove driver specific settings
- * @drive: drive
- *
- * Automatically remove all the driver specific settings for this
- * drive. This function may not be called from IRQ context. The
- * caller must hold ide_setting_sem.
- */
-
-static void auto_remove_settings (ide_drive_t *drive)
-{
- ide_settings_t *setting;
-repeat:
- setting = drive->settings;
- while (setting) {
- if (setting->auto_remove) {
- __ide_remove_setting(drive, setting->name);
- goto repeat;
- }
- setting = setting->next;
- }
-}
-
-/**
- * ide_read_setting - read an IDE setting
- * @drive: drive to read from
- * @setting: drive setting
- *
- * Read a drive setting and return the value. The caller
- * must hold the ide_setting_sem when making this call.
- *
- * BUGS: the data return and error are the same return value
- * so an error -EINVAL and true return of the same value cannot
- * be told apart
- */
-
-int ide_read_setting (ide_drive_t *drive, ide_settings_t *setting)
-{
- int val = -EINVAL;
- unsigned long flags;
-
- if ((setting->rw & SETTING_READ)) {
- spin_lock_irqsave(&ide_lock, flags);
- switch(setting->data_type) {
- case TYPE_BYTE:
- val = *((u8 *) setting->data);
- break;
- case TYPE_SHORT:
- val = *((u16 *) setting->data);
- break;
- case TYPE_INT:
- val = *((u32 *) setting->data);
- break;
- }
- spin_unlock_irqrestore(&ide_lock, flags);
- }
- return val;
-}
-
-/**
* ide_spin_wait_hwgroup - wait for group
* @drive: drive in the group
*
@@ -1034,52 +862,7 @@ int ide_spin_wait_hwgroup (ide_drive_t *
EXPORT_SYMBOL(ide_spin_wait_hwgroup);
-/**
- * ide_write_setting - read an IDE setting
- * @drive: drive to read from
- * @setting: drive setting
- * @val: value
- *
- * Write a drive setting if it is possible. The caller
- * must hold the ide_setting_sem when making this call.
- *
- * BUGS: the data return and error are the same return value
- * so an error -EINVAL and true return of the same value cannot
- * be told apart
- *
- * FIXME: This should be changed to enqueue a special request
- * to the driver to change settings, and then wait on a sema for completion.
- * The current scheme of polling is kludgy, though safe enough.
- */
-
-int ide_write_setting (ide_drive_t *drive, ide_settings_t *setting, int val)
-{
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- if (setting->set)
- return setting->set(drive, val);
- if (!(setting->rw & SETTING_WRITE))
- return -EPERM;
- if (val < setting->min || val > setting->max)
- return -EINVAL;
- if (ide_spin_wait_hwgroup(drive))
- return -EBUSY;
- switch (setting->data_type) {
- case TYPE_BYTE:
- *((u8 *) setting->data) = val;
- break;
- case TYPE_SHORT:
- *((u16 *) setting->data) = val;
- break;
- case TYPE_INT:
- *((u32 *) setting->data) = val;
- break;
- }
- spin_unlock_irq(&ide_lock);
- return 0;
-}
-
-static int set_io_32bit(ide_drive_t *drive, int arg)
+int set_io_32bit(ide_drive_t *drive, int arg)
{
if (drive->no_io_32bit)
return -EPERM;
@@ -1108,7 +891,7 @@ static int set_ksettings(ide_drive_t *dr
return 0;
}
-static int set_using_dma (ide_drive_t *drive, int arg)
+int set_using_dma(ide_drive_t *drive, int arg)
{
if (arg < 0 || arg > 1)
return -EINVAL;
@@ -1130,7 +913,7 @@ static int set_using_dma (ide_drive_t *d
#endif
}
-static int set_pio_mode (ide_drive_t *drive, int arg)
+int set_pio_mode(ide_drive_t *drive, int arg)
{
struct request rq;
@@ -1164,48 +947,6 @@ static int set_unmaskirq(ide_drive_t *dr
return 0;
}
-static int set_xfer_rate (ide_drive_t *drive, int arg)
-{
- int err;
-
- if (arg < 0 || arg > 70)
- return -EINVAL;
-
- err = ide_wait_cmd(drive,
- WIN_SETFEATURES, (u8) arg,
- SETFEATURES_XFER, 0, NULL);
-
- if (!err && arg) {
- ide_set_xfer_rate(drive, (u8) arg);
- ide_driveid_update(drive);
- }
- return err;
-}
-
-/**
- * ide_add_generic_settings - generic ide settings
- * @drive: drive being configured
- *
- * Add the generic parts of the system settings to the /proc files.
- * The caller must not be holding the ide_setting_sem.
- */
-
-void ide_add_generic_settings (ide_drive_t *drive)
-{
-/*
- * drive setting name read/write access data type min max mul_factor div_factor data pointer set function
- */
- __ide_add_setting(drive, "io_32bit", drive->no_io_32bit ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1 + (SUPPORT_VLB_SYNC << 1), 1, 1, &drive->io_32bit, set_io_32bit, 0);
- __ide_add_setting(drive, "keepsettings", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL, 0);
- __ide_add_setting(drive, "nice1", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL, 0);
- __ide_add_setting(drive, "pio_mode", SETTING_WRITE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode, 0);
- __ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL, 0);
- __ide_add_setting(drive, "using_dma", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma, 0);
- __ide_add_setting(drive, "init_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL, 0);
- __ide_add_setting(drive, "current_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->current_speed, set_xfer_rate, 0);
- __ide_add_setting(drive, "number", SETTING_RW, TYPE_BYTE, 0, 3, 1, 1, &drive->dn, NULL, 0);
-}
-
/**
* system_bus_clock - clock guess
*
@@ -1907,54 +1648,6 @@ static void __init probe_for_hwifs (void
#endif
}
-void ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver)
-{
-#ifdef CONFIG_IDE_PROC_FS
- ide_add_proc_entries(drive->proc, driver->proc, drive);
-#endif
-}
-
-EXPORT_SYMBOL(ide_register_subdriver);
-
-/**
- * ide_unregister_subdriver - disconnect drive from driver
- * @drive: drive to unplug
- * @driver: driver
- *
- * Disconnect a drive from the driver it was attached to and then
- * clean up the various proc files and other objects attached to it.
- *
- * Takes ide_setting_sem and ide_lock.
- * Caller must hold none of the locks.
- */
-
-void ide_unregister_subdriver(ide_drive_t *drive, ide_driver_t *driver)
-{
- unsigned long flags;
-
-#ifdef CONFIG_IDE_PROC_FS
- ide_remove_proc_entries(drive->proc, driver->proc);
-#endif
- down(&ide_setting_sem);
- spin_lock_irqsave(&ide_lock, flags);
- /*
- * ide_setting_sem protects the settings list
- * ide_lock protects the use of settings
- *
- * so we need to hold both, ide_settings_sem because we want to
- * modify the settings list, and ide_lock because we cannot take
- * a setting out that is being used.
- *
- * OTOH both ide_{read,write}_setting are only ever used under
- * ide_setting_sem.
- */
- auto_remove_settings(drive);
- spin_unlock_irqrestore(&ide_lock, flags);
- up(&ide_setting_sem);
-}
-
-EXPORT_SYMBOL(ide_unregister_subdriver);
-
/*
* Probe module
*/
Index: b/drivers/scsi/ide-scsi.c
===================================================================
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -721,6 +721,7 @@ static ide_startstop_t idescsi_do_reques
return ide_stopped;
}
+#ifdef CONFIG_IDE_PROC_FS
static void idescsi_add_settings(ide_drive_t *drive)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
@@ -734,6 +735,9 @@ static void idescsi_add_settings(ide_dri
ide_add_setting(drive, "transform", SETTING_RW, TYPE_INT, 0, 3, 1, 1, &scsi->transform, NULL);
ide_add_setting(drive, "log", SETTING_RW, TYPE_INT, 0, 1, 1, 1, &scsi->log, NULL);
}
+#else
+static inline void idescsi_add_settings(ide_drive_t *drive) { ; }
+#endif
/*
* Driver initialization.
@@ -756,7 +760,7 @@ static void ide_scsi_remove(ide_drive_t
struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost);
struct gendisk *g = scsi->disk;
- ide_unregister_subdriver(drive, scsi->driver);
+ ide_proc_unregister_driver(drive, scsi->driver);
ide_unregister_region(g);
@@ -775,8 +779,6 @@ static ide_proc_entry_t idescsi_proc[] =
{ "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL },
{ NULL, 0, NULL, NULL }
};
-#else
-# define idescsi_proc NULL
#endif
static ide_driver_t idescsi_driver = {
@@ -790,11 +792,13 @@ static ide_driver_t idescsi_driver = {
.version = IDESCSI_VERSION,
.media = ide_scsi,
.supports_dsc_overlap = 0,
- .proc = idescsi_proc,
.do_request = idescsi_do_request,
.end_request = idescsi_end_request,
.error = idescsi_atapi_error,
.abort = idescsi_atapi_abort,
+#ifdef CONFIG_IDE_PROC_FS
+ .proc = idescsi_proc,
+#endif
};
static int idescsi_ide_open(struct inode *inode, struct file *filp)
@@ -1153,7 +1157,7 @@ static int ide_scsi_probe(ide_drive_t *d
idescsi->host = host;
idescsi->disk = g;
g->private_data = &idescsi->driver;
- ide_register_subdriver(drive, &idescsi_driver);
+ ide_proc_register_driver(drive, &idescsi_driver);
err = 0;
idescsi_setup(drive, idescsi);
g->fops = &idescsi_ops;
@@ -1165,7 +1169,7 @@ static int ide_scsi_probe(ide_drive_t *d
}
/* fall through on error */
ide_unregister_region(g);
- ide_unregister_subdriver(drive, &idescsi_driver);
+ ide_proc_unregister_driver(drive, &idescsi_driver);
put_disk(g);
out_host_put:
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -559,9 +559,10 @@ typedef struct ide_drive_s {
struct ide_drive_s *next; /* circular list of hwgroup drives */
void *driver_data; /* extra driver data */
struct hd_driveid *id; /* drive model identification info */
+#ifdef CONFIG_IDE_PROC_FS
struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
struct ide_settings_s *settings;/* /proc/ide/ drive settings */
-
+#endif
struct hwif_s *hwif; /* actually (ide_hwif_t *) */
unsigned long sleep; /* sleep until this time */
@@ -856,8 +857,15 @@ typedef struct hwgroup_s {
unsigned char cmd_buf[4];
} ide_hwgroup_t;
-/* structure attached to the request for IDE_TASK_CMDS */
+typedef struct ide_driver_s ide_driver_t;
+
+extern struct semaphore ide_setting_sem;
+int set_io_32bit(ide_drive_t *, int);
+int set_pio_mode(ide_drive_t *, int);
+int set_using_dma(ide_drive_t *, int);
+
+#ifdef CONFIG_IDE_PROC_FS
/*
* configurable drive settings
*/
@@ -885,12 +893,7 @@ typedef struct ide_settings_s {
struct ide_settings_s *next;
} ide_settings_t;
-extern struct semaphore ide_setting_sem;
int ide_add_setting(ide_drive_t *, const char *, int, int, int, int, int, int, void *, ide_procset_t *set);
-extern ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name);
-extern int ide_read_setting(ide_drive_t *t, ide_settings_t *setting);
-extern int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int val);
-extern void ide_add_generic_settings(ide_drive_t *drive);
/*
* /proc/ide interface
@@ -902,15 +905,17 @@ typedef struct {
write_proc_t *write_proc;
} ide_proc_entry_t;
-#ifdef CONFIG_IDE_PROC_FS
extern struct proc_dir_entry *proc_ide_root;
void proc_ide_create(void);
void proc_ide_destroy(void);
void create_proc_ide_interfaces(void);
void destroy_proc_ide_interface(ide_hwif_t *);
-void ide_add_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *, void *);
-void ide_remove_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *);
+void ide_proc_register_driver(ide_drive_t *, ide_driver_t *);
+void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *);
+
+void ide_add_generic_settings(ide_drive_t *);
+
read_proc_t proc_ide_read_capacity;
read_proc_t proc_ide_read_geometry;
@@ -938,6 +943,9 @@ static inline void proc_ide_create(void)
static inline void proc_ide_destroy(void) { ; }
static inline void create_proc_ide_interfaces(void) { ; }
static inline void destroy_proc_ide_interface(ide_hwif_t *hwif) { ; }
+static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
+static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
+static inline void ide_add_generic_settings(ide_drive_t *drive) { ; }
#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
#endif
@@ -980,7 +988,7 @@ enum {
* The gendriver.owner field should be set to the module owner of this driver.
* The gendriver.name field should be set to the name of this driver
*/
-typedef struct ide_driver_s {
+struct ide_driver_s {
const char *version;
u8 media;
unsigned supports_dsc_overlap : 1;
@@ -988,12 +996,14 @@ typedef struct ide_driver_s {
int (*end_request)(ide_drive_t *, int, int);
ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
ide_startstop_t (*abort)(ide_drive_t *, struct request *rq);
- ide_proc_entry_t *proc;
struct device_driver gen_driver;
int (*probe)(ide_drive_t *);
void (*remove)(ide_drive_t *);
void (*shutdown)(ide_drive_t *);
-} ide_driver_t;
+#ifdef CONFIG_IDE_PROC_FS
+ ide_proc_entry_t *proc;
+#endif
+};
#define to_ide_driver(drv) container_of(drv, ide_driver_t, gen_driver)
@@ -1203,9 +1213,6 @@ extern void default_hwif_iops(ide_hwif_t
extern void default_hwif_mmiops(ide_hwif_t *);
extern void default_hwif_transport(ide_hwif_t *);
-void ide_register_subdriver(ide_drive_t *, ide_driver_t *);
-void ide_unregister_subdriver(ide_drive_t *, ide_driver_t *);
-
#define ON_BOARD 1
#define NEVER_BOARD 0
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
