Re: [PATCH] Re: 2.6.17-rc5-git1: regression: resume from suspend(RAM) fails: libata issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Saturday 27 May 2006 00:00, Jeff Garzik wrote:
> Although I didn't even bother to compile-test it, here is the 
> recommended solution, as described multiple times...

..

That patch has ZERO (positive) effect on my machine.
It still crashes miserably with a zillion "read errors" on resume
(drive not accessible).

The original "bad layering" patch still works perfectly in it's place.
Repeated below for Linus's benefit.

Signed-off-by: Mark Lord <lkml@xxxxxx>
---
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -90,6 +90,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
 #include <linux/libata.h>
 
 #define DRV_NAME	"ata_piix"
@@ -151,6 +152,7 @@ static int piix_pata_probe_reset(struct 
 static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes);
 static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
 static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
+static int piix_scsi_device_resume(struct scsi_device *sdev);
 
 static unsigned int in_module_init = 1;
 
@@ -220,7 +222,7 @@ static struct scsi_host_template piix_sh
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
 	.bios_param		= ata_std_bios_param,
-	.resume			= ata_scsi_device_resume,
+	.resume			= piix_scsi_device_resume,
 	.suspend		= ata_scsi_device_suspend,
 };
 
@@ -710,6 +712,21 @@ static void piix_set_dmamode (struct ata
 	}
 }
 
+int piix_scsi_device_resume(struct scsi_device *sdev)
+{
+	struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
+	struct ata_device *dev = &ap->device[sdev->id];
+	u8 status;
+
+	status = ata_busy_wait(ap, ATA_BUSY, 200000);
+	if (status & ATA_BUSY) {
+		printk(KERN_ERR "libata port failed to resume "
+				"in 2 secs)\n");
+		return 1;
+	}
+	return ata_device_resume(ap, dev);
+}
+
 #define AHCI_PCI_BAR 5
 #define AHCI_GLOBAL_CTL 0x04
 #define AHCI_ENABLE (1 << 31)
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux