Steven Scholz wrote:
Hi all,
I get repeatable erros when accessing a 1GB SimpleTech CF Flash Card (SLCF1GBJ).
..
~ # hdparm -i /dev/hda
Model=STI Flash 7.0.0, FwRev=05/03/04, SerialNo=STI J107004201112846
Config={ HardSect NotMFM Removeable DTR>10Mbs nonMagnetic }
RawCHS=2006/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=0kB, MaxMultSect=1, MultSect=off
CurCHS=2006/16/63, CurSects=2022048, LBA=yes, LBAsects=2022048
IORDY=no, tPIO={min:120,w/IORDY:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
AdvancedPM=no WriteCache=enabled
When doing "mke2fs /dev/hda1" after 30 seconds I get
hda: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
ide0: reset: master: error (0x00?)
Mmmm.. No idea, but one thing to try is "hdparm -W0" on the card,
and see if that makes any difference.
Cheers
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
