Please pull from 'upstream-fixes' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
to receive the following updates:
drivers/scsi/libata-core.c | 6 ++
drivers/scsi/sata_mv.c | 134 +++++++++++++++++++++++++--------------------
2 files changed, 83 insertions(+), 57 deletions(-)
Mark Lord:
sata_mv: prevent unnecessary double-resets
sata_mv: deal with interrupt coalescing interrupts
sata_mv: chip initialization fixes
sata_mv: spurious interrupt workaround
sata_mv: remove local copy of queue indexes
sata_mv: endian fix
sata_mv: version bump
Randy Dunlap:
libata-core: fix current kernel-doc warnings
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index bd14720..823dfa7 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -864,6 +864,9 @@ static unsigned int ata_id_xfermask(cons
/**
* ata_port_queue_task - Queue port_task
* @ap: The ata_port to queue port_task for
+ * @fn: workqueue function to be scheduled
+ * @data: data value to pass to workqueue function
+ * @delay: delay time for workqueue function
*
* Schedule @fn(@data) for execution after @delay jiffies using
* port_task. There is one port_task per port and it's the
@@ -2739,6 +2742,8 @@ static unsigned int ata_dev_set_xfermode
* ata_dev_init_params - Issue INIT DEV PARAMS command
* @ap: Port associated with device @dev
* @dev: Device to which command will be sent
+ * @heads: Number of heads (taskfile parameter)
+ * @sectors: Number of sectors (taskfile parameter)
*
* LOCKING:
* Kernel thread context (may sleep)
@@ -4302,6 +4307,7 @@ int ata_device_resume(struct ata_port *a
* ata_device_suspend - prepare a device for suspend
* @ap: port the device is connected to
* @dev: the device to suspend
+ * @state: target power management state
*
* Flush the cache on the drive, if appropriate, then issue a
* standbynow command.
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index d5fdcb9..9b8bca1 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -37,7 +37,7 @@ #include <linux/libata.h>
#include <asm/io.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.6"
+#define DRV_VERSION "0.7"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -50,6 +50,12 @@ enum {
MV_PCI_REG_BASE = 0,
MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */
+ MV_IRQ_COAL_CAUSE = (MV_IRQ_COAL_REG_BASE + 0x08),
+ MV_IRQ_COAL_CAUSE_LO = (MV_IRQ_COAL_REG_BASE + 0x88),
+ MV_IRQ_COAL_CAUSE_HI = (MV_IRQ_COAL_REG_BASE + 0x8c),
+ MV_IRQ_COAL_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xcc),
+ MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0),
+
MV_SATAHC0_REG_BASE = 0x20000,
MV_FLASH_CTL = 0x1046c,
MV_GPIO_PORT_CTL = 0x104f0,
@@ -302,9 +308,6 @@ struct mv_port_priv {
dma_addr_t crpb_dma;
struct mv_sg *sg_tbl;
dma_addr_t sg_tbl_dma;
-
- unsigned req_producer; /* cp of req_in_ptr */
- unsigned rsp_consumer; /* cp of rsp_out_ptr */
u32 pp_flags;
};
@@ -937,8 +940,6 @@ static int mv_port_start(struct ata_port
writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
- pp->req_producer = pp->rsp_consumer = 0;
-
/* Don't turn on EDMA here...do it before DMA commands only. Else
* we'll be unable to send non-data, PIO, etc due to restricted access
* to shadow regs.
@@ -1022,16 +1023,16 @@ static void mv_fill_sg(struct ata_queued
}
}
-static inline unsigned mv_inc_q_index(unsigned *index)
+static inline unsigned mv_inc_q_index(unsigned index)
{
- *index = (*index + 1) & MV_MAX_Q_DEPTH_MASK;
- return *index;
+ return (index + 1) & MV_MAX_Q_DEPTH_MASK;
}
static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last)
{
- *cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
+ u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
(last ? CRQB_CMD_LAST : 0);
+ *cmdw = cpu_to_le16(tmp);
}
/**
@@ -1053,15 +1054,11 @@ static void mv_qc_prep(struct ata_queued
u16 *cw;
struct ata_taskfile *tf;
u16 flags = 0;
+ unsigned in_index;
if (ATA_PROT_DMA != qc->tf.protocol)
return;
- /* the req producer index should be the same as we remember it */
- WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
- EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
- pp->req_producer);
-
/* Fill in command request block
*/
if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@@ -1069,13 +1066,17 @@ static void mv_qc_prep(struct ata_queued
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
- pp->crqb[pp->req_producer].sg_addr =
+ /* get current queue index from hardware */
+ in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+ pp->crqb[in_index].sg_addr =
cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
- pp->crqb[pp->req_producer].sg_addr_hi =
+ pp->crqb[in_index].sg_addr_hi =
cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
- pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags);
+ pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
- cw = &pp->crqb[pp->req_producer].ata_cmd[0];
+ cw = &pp->crqb[in_index].ata_cmd[0];
tf = &qc->tf;
/* Sadly, the CRQB cannot accomodate all registers--there are
@@ -1144,16 +1145,12 @@ static void mv_qc_prep_iie(struct ata_qu
struct mv_port_priv *pp = ap->private_data;
struct mv_crqb_iie *crqb;
struct ata_taskfile *tf;
+ unsigned in_index;
u32 flags = 0;
if (ATA_PROT_DMA != qc->tf.protocol)
return;
- /* the req producer index should be the same as we remember it */
- WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
- EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
- pp->req_producer);
-
/* Fill in Gen IIE command request block
*/
if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@@ -1162,7 +1159,11 @@ static void mv_qc_prep_iie(struct ata_qu
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
- crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer];
+ /* get current queue index from hardware */
+ in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+ crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
crqb->flags = cpu_to_le32(flags);
@@ -1210,6 +1211,7 @@ static unsigned int mv_qc_issue(struct a
{
void __iomem *port_mmio = mv_ap_base(qc->ap);
struct mv_port_priv *pp = qc->ap->private_data;
+ unsigned in_index;
u32 in_ptr;
if (ATA_PROT_DMA != qc->tf.protocol) {
@@ -1221,23 +1223,20 @@ static unsigned int mv_qc_issue(struct a
return ata_qc_issue_prot(qc);
}
- in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+ in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+ in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
- /* the req producer index should be the same as we remember it */
- WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
- pp->req_producer);
/* until we do queuing, the queue should be empty at this point */
- WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
- ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
- EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+ WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
- mv_inc_q_index(&pp->req_producer); /* now incr producer index */
+ in_index = mv_inc_q_index(in_index); /* now incr producer index */
mv_start_dma(port_mmio, pp);
/* and write the request in pointer to kick the EDMA to life */
in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
- in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT;
+ in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT;
writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
return 0;
@@ -1260,28 +1259,26 @@ static u8 mv_get_crpb_status(struct ata_
{
void __iomem *port_mmio = mv_ap_base(ap);
struct mv_port_priv *pp = ap->private_data;
+ unsigned out_index;
u32 out_ptr;
u8 ata_status;
- out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+ out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+ out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
- /* the response consumer index should be the same as we remember it */
- WARN_ON(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
- pp->rsp_consumer);
-
- ata_status = pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT;
+ ata_status = le16_to_cpu(pp->crpb[out_index].flags)
+ >> CRPB_FLAG_STATUS_SHIFT;
/* increment our consumer index... */
- pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
+ out_index = mv_inc_q_index(out_index);
/* and, until we do NCQ, there should only be 1 CRPB waiting */
- WARN_ON(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
- EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
- pp->rsp_consumer);
+ WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
+ >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
/* write out our inc'd consumer index so EDMA knows we're caught up */
out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
- out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT;
+ out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT;
writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
/* Return ATA status register for completed CRPB */
@@ -1291,6 +1288,7 @@ static u8 mv_get_crpb_status(struct ata_
/**
* mv_err_intr - Handle error interrupts on the port
* @ap: ATA channel to manipulate
+ * @reset_allowed: bool: 0 == don't trigger from reset here
*
* In most cases, just clear the interrupt and move on. However,
* some cases require an eDMA reset, which is done right before
@@ -1301,7 +1299,7 @@ static u8 mv_get_crpb_status(struct ata_
* LOCKING:
* Inherited from caller.
*/
-static void mv_err_intr(struct ata_port *ap)
+static void mv_err_intr(struct ata_port *ap, int reset_allowed)
{
void __iomem *port_mmio = mv_ap_base(ap);
u32 edma_err_cause, serr = 0;
@@ -1323,9 +1321,8 @@ static void mv_err_intr(struct ata_port
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
/* check for fatal here and recover if needed */
- if (EDMA_ERR_FATAL & edma_err_cause) {
+ if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause))
mv_stop_and_reset(ap);
- }
}
/**
@@ -1374,12 +1371,12 @@ static void mv_host_intr(struct ata_host
struct ata_port *ap = host_set->ports[port];
struct mv_port_priv *pp = ap->private_data;
- hard_port = port & MV_PORT_MASK; /* range 0-3 */
+ hard_port = mv_hardport_from_port(port); /* range 0..3 */
handled = 0; /* ensure ata_status is set if handled++ */
/* Note that DEV_IRQ might happen spuriously during EDMA,
- * and should be ignored in such cases. We could mask it,
- * but it's pretty rare and may not be worth the overhead.
+ * and should be ignored in such cases.
+ * The cause of this is still under investigation.
*/
if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
/* EDMA: check for response queue interrupt */
@@ -1393,6 +1390,11 @@ static void mv_host_intr(struct ata_host
ata_status = readb((void __iomem *)
ap->ioaddr.status_addr);
handled = 1;
+ /* ignore spurious intr if drive still BUSY */
+ if (ata_status & ATA_BUSY) {
+ ata_status = 0;
+ handled = 0;
+ }
}
}
@@ -1406,7 +1408,7 @@ static void mv_host_intr(struct ata_host
shift++; /* skip bit 8 in the HC Main IRQ reg */
}
if ((PORT0_ERR << shift) & relevant) {
- mv_err_intr(ap);
+ mv_err_intr(ap, 1);
err_mask |= AC_ERR_OTHER;
handled = 1;
}
@@ -1448,6 +1450,7 @@ static irqreturn_t mv_interrupt(int irq,
struct ata_host_set *host_set = dev_instance;
unsigned int hc, handled = 0, n_hcs;
void __iomem *mmio = host_set->mmio_base;
+ struct mv_host_priv *hpriv;
u32 irq_stat;
irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
@@ -1469,6 +1472,17 @@ static irqreturn_t mv_interrupt(int irq,
handled++;
}
}
+
+ hpriv = host_set->private_data;
+ if (IS_60XX(hpriv)) {
+ /* deal with the interrupt coalescing bits */
+ if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) {
+ writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO);
+ writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI);
+ writelfl(0, mmio + MV_IRQ_COAL_CAUSE);
+ }
+ }
+
if (PCI_ERR & irq_stat) {
printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
readl(mmio + PCI_IRQ_CAUSE_OFS));
@@ -1867,7 +1881,8 @@ static void mv_channel_reset(struct mv_h
if (IS_60XX(hpriv)) {
u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
- ifctl |= (1 << 12) | (1 << 7);
+ ifctl |= (1 << 7); /* enable gen2i speed */
+ ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
}
@@ -2031,11 +2046,14 @@ static void mv_eng_timeout(struct ata_po
ap->host_set->mmio_base, ap, qc, qc->scsicmd,
&qc->scsicmd->cmnd);
- mv_err_intr(ap);
+ mv_err_intr(ap, 0);
mv_stop_and_reset(ap);
- qc->err_mask |= AC_ERR_TIMEOUT;
- ata_eh_qc_complete(qc);
+ WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
+ if (qc->flags & ATA_QCFLAG_ACTIVE) {
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ ata_eh_qc_complete(qc);
+ }
}
/**
@@ -2229,7 +2247,8 @@ static int mv_init_host(struct pci_dev *
void __iomem *port_mmio = mv_port_base(mmio, port);
u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
- ifctl |= (1 << 12);
+ ifctl |= (1 << 7); /* enable gen2i speed */
+ ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
}
@@ -2330,6 +2349,7 @@ static int mv_init_one(struct pci_dev *p
if (rc) {
return rc;
}
+ pci_set_master(pdev);
rc = pci_request_regions(pdev, DRV_NAME);
if (rc) {
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
