Re: [PATCH v2 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 13 Aug 2024 19:00:41 -0400, Richard Acayan wrote:
> As found in the Pixel 3a, the Snapdragon 670 has a camera subsystem with
> 3 CSIDs and 3 VFEs (including 1 VFE lite). Add this camera subsystem to
> the bindings.
> 
> Adapted from SC8280XP camera subsystem.
> 
> Signed-off-by: Richard Acayan <mailingradian@xxxxxxxxx>
> ---
>  .../bindings/media/qcom,sdm670-camss.yaml     | 324 ++++++++++++++++++
>  1 file changed, 324 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dts:32.19-150.15: Warning (unit_address_vs_reg): /example-0/soc/camss: node has a reg or ranges property, but no unit name
Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dts:142.46-147.27: Warning (unit_address_vs_reg): /example-0/soc/camss/ports/port@0/endpoint: node has a reg or ranges property, but no unit name
Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dts:142.46-147.27: Warning (graph_endpoint): /example-0/soc/camss/ports/port@0/endpoint: graph node unit address error, expected "0"
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: reg-names:0: 'csid0' was expected
	from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: reg-names:1: 'csid1' was expected
	from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: reg-names:2: 'csid2' was expected
	from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: reg-names:4: 'csiphy0' was expected
	from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: reg-names:6: 'csiphy1' was expected
	from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: reg-names:8: 'csiphy2' was expected
	from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: 'interconnects' is a required property
	from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb: camss: 'interconnect-names' is a required property
	from schema $id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240813230037.84004-10-mailingradian@xxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux