[PATCH v2 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As found in the Pixel 3a, the Snapdragon 670 has a camera subsystem with
3 CSIDs and 3 VFEs (including 1 VFE lite). Add this camera subsystem to
the bindings.

Adapted from SC8280XP camera subsystem.

Signed-off-by: Richard Acayan <mailingradian@xxxxxxxxx>
---
 .../bindings/media/qcom,sdm670-camss.yaml     | 324 ++++++++++++++++++
 1 file changed, 324 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml

diff --git a/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
new file mode 100644
index 000000000000..c276f90c5029
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
@@ -0,0 +1,324 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM670 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Richard Acayan <mailingradian@xxxxxxxxx>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sdm670-camss
+
+  clocks:
+    maxItems: 22
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: csi0
+      - const: csi1
+      - const: csi2
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: gcc_camera_ahb
+      - const: gcc_camera_axi
+      - const: soc_ahb
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+
+  interrupts:
+    maxItems: 9
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: top
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY0.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY1.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY2.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+  reg:
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: vfe0
+      - const: csiphy0
+      - const: vfe1
+      - const: csiphy1
+      - const: vfe_lite
+      - const: csiphy2
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interconnects
+  - interconnect-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - reg
+  - reg-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss {
+            compatible = "qcom,sdm670-camss";
+
+            reg = <0 0x0ac65000 0 0x1000>,
+                  <0 0x0ac66000 0 0x1000>,
+                  <0 0x0ac67000 0 0x1000>,
+                  <0 0x0acaf000 0 0x4000>,
+                  <0 0x0acb3000 0 0x1000>,
+                  <0 0x0acb6000 0 0x4000>,
+                  <0 0x0acba000 0 0x1000>,
+                  <0 0x0acc4000 0 0x4000>,
+                  <0 0x0acc8000 0 0x1000>;
+            reg-names = "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "vfe0",
+                        "csid0",
+                        "vfe1",
+                        "csid1",
+                        "vfe_lite",
+                        "csid2";
+
+            interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid2",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite";
+
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_1_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&gcc GCC_CAMERA_AHB_CLK>,
+                     <&gcc GCC_CAMERA_AXI_CLK>,
+                     <&camcc CAM_CC_SOC_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_1_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>;
+            clock-names = "camnoc_axi",
+                          "cpas_ahb",
+                          "csi0",
+                          "csi1",
+                          "csi2",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "gcc_camera_ahb",
+                          "gcc_camera_axi",
+                          "soc_ahb",
+                          "vfe0_axi",
+                          "vfe0",
+                          "vfe0_cphy_rx",
+                          "vfe1_axi",
+                          "vfe1",
+                          "vfe1_cphy_rx",
+                          "vfe_lite",
+                          "vfe_lite_cphy_rx";
+
+            iommus = <&apps_smmu 0x808 0x0>,
+                     <&apps_smmu 0x810 0x8>,
+                     <&apps_smmu 0xc08 0x0>,
+                     <&apps_smmu 0xc10 0x8>;
+
+            power-domains = <&camcc IFE_0_GDSC>,
+                            <&camcc IFE_1_GDSC>,
+                            <&camcc TITAN_TOP_GDSC>;
+            power-domain-names = "ife0",
+                                 "ife1",
+                                 "top";
+
+            vdda-phy-supply = <&vreg_l1a_1p225>;
+            vdda-pll-supply = <&vreg_l8a_1p8>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    csiphy_ep0: endpoint {
+                        reg = <0>;
+                        clock-lanes = <7>;
+                        data-lanes = <0 1 2 3>;
+                        remote-endpoint = <&front_sensor_ep>;
+                    };
+                };
+            };
+        };
+    };
-- 
2.46.0





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux