On 11/03/24 19:25, Krzysztof Kozlowski wrote: > On 11/03/2024 05:14, Chris Packham wrote: >> Some hardware designs with multiple PCA954x devices use a reset GPIO >> connected to all the muxes. Support this configuration by making use of >> the reset controller framework which can deal with the shared reset >> GPIOs. Fall back to the old GPIO descriptor method if the reset >> controller framework is not enabled. >> >> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> >> --- >> >> Notes: >> This patch goes on top of Krzysztof's series adding the GPIO based reset >> controller[1] which will be in linux-6.9. With this I'm able to >> correctly describe my hardware platform in the DTS and have the resets >> appropriately controlled. >> >> [1] - https://lore.kernel.org/all/20240129115216.96479-1-krzysztof.kozlowski@xxxxxxxxxx/ >> > Where is the changelog? It was v3 or v4 already? Where are the tags? Since this was spun off the original series I figured it would be best to treat it as v1 of a new series. It's unchanged since https://lore.kernel.org/lkml/20240112163608.528453-6-krzysztof.kozlowski@xxxxxxxxxx/ so technically this is '[PATCH resend v3]'. I did rebase it on top of linux-next just to make sure it still worked. > It looks like you received a tag and forgot to add it. > > If you do not know the process, here is a short explanation: > Please add Acked-by/Reviewed-by/Tested-by tags when posting new > versions, under or above your Signed-off-by tag. Tag is "received", when > provided in a message replied to you on the mailing list. Tools like b4 > can help here. However, there's no need to repost patches *only* to add > the tags. The upstream maintainer will do that for tags received on the > version they apply. > > https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577 > > If a tag was not added on purpose, please state why and what changed. Oops my bad. I think because by the time v3 rolled round it was part of your series I never added the Ack from Peter or your R-by to my local commit which is what I sent out. I've added it now if I send a v4 (or is it v2 of this?) I'll include the tags.
