On 3/10/24 23:14, Chris Packham wrote:
Some hardware designs with multiple PCA954x devices use a reset GPIO
connected to all the muxes. Support this configuration by making use of
the reset controller framework which can deal with the shared reset
GPIOs. Fall back to the old GPIO descriptor method if the reset
controller framework is not enabled.
Hello Chris, Krzysztof,
This change makes it so that the reset subsystem reset doesn't behave in
the same way as the fallback gpio reset. The gpio, as part of acquiring
it, gets set high, and then set low in the mux driver. So, the device
reset is toggled. In the case of the reset subsystem option, the reset
is only de-asserted (so the device is taken out of reset).
I'm interested in preserving the previous behavior but with the shared
reset line. This can't be done just by doing "assert" first because the
shared reset subsystem doesn't allow that. So the reset-gpio driver
would have to implement the reset operation - no problem. However, how
to specify the wait time for the reset-gpio driver here? Something like
the simple reset driver maybe? Or a function call from the reset
consumer driver to specify the wait time for that reset?
Thanks,
Eddie
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
Notes:
This patch goes on top of Krzysztof's series adding the GPIO based reset
controller[1] which will be in linux-6.9. With this I'm able to
correctly describe my hardware platform in the DTS and have the resets
appropriately controlled.
[1] - https://lore.kernel.org/all/20240129115216.96479-1-krzysztof.kozlowski@xxxxxxxxxx/
drivers/i2c/muxes/i2c-mux-pca954x.c | 46 ++++++++++++++++++++++++-----
1 file changed, 38 insertions(+), 8 deletions(-)
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index f5dfc33b97c0..c3f4ff08ac38 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -49,6 +49,7 @@
#include <linux/pm.h>
#include <linux/property.h>
#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <dt-bindings/mux/mux.h>
@@ -116,6 +117,9 @@ struct pca954x {
unsigned int irq_mask;
raw_spinlock_t lock;
struct regulator *supply;
+
+ struct gpio_desc *reset_gpio;
+ struct reset_control *reset_cont;
};
/* Provide specs for the MAX735x, PCA954x and PCA984x types we know about */
@@ -518,6 +522,35 @@ static int pca954x_init(struct i2c_client *client, struct pca954x *data)
return ret;
}
+static int pca954x_get_reset(struct device *dev, struct pca954x *data)
+{
+ data->reset_cont = devm_reset_control_get_optional_shared(dev, NULL);
+ if (IS_ERR(data->reset_cont))
+ return dev_err_probe(dev, PTR_ERR(data->reset_cont),
+ "Failed to get reset\n");
+ else if (data->reset_cont)
+ return 0;
+
+ /*
+ * fallback to legacy reset-gpios
+ */
+ data->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(data->reset_gpio)) {
+ return dev_err_probe(dev, PTR_ERR(data->reset_gpio),
+ "Failed to get reset gpio");
+ }
+
+ return 0;
+}
+
+static void pca954x_reset_deassert(struct pca954x *data)
+{
+ if (data->reset_cont)
+ reset_control_deassert(data->reset_cont);
+ else
+ gpiod_set_value_cansleep(data->reset_gpio, 0);
+}
+
/*
* I2C init/probing/exit functions
*/
@@ -526,7 +559,6 @@ static int pca954x_probe(struct i2c_client *client)
const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct i2c_adapter *adap = client->adapter;
struct device *dev = &client->dev;
- struct gpio_desc *gpio;
struct i2c_mux_core *muxc;
struct pca954x *data;
int num;
@@ -554,15 +586,13 @@ static int pca954x_probe(struct i2c_client *client)
return dev_err_probe(dev, ret,
"Failed to enable vdd supply\n");
- /* Reset the mux if a reset GPIO is specified. */
- gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
- if (IS_ERR(gpio)) {
- ret = PTR_ERR(gpio);
+ ret = pca954x_get_reset(dev, data);
+ if (ret)
goto fail_cleanup;
- }
- if (gpio) {
+
+ if (data->reset_cont || data->reset_gpio) {
udelay(1);
- gpiod_set_value_cansleep(gpio, 0);
+ pca954x_reset_deassert(data);
/* Give the chip some time to recover. */
udelay(1);
}
