Le Tue, Nov 08, 2022 at 11:48:51AM +0100, Jean Delvare a écrit : > Hi Corentin, > > On Mon, 7 Nov 2022 16:06:02 +0000, Corentin Labbe wrote: > > On my x05 laptop I got: > > Memory type 0x12 not supported yet, not instantiating SPD > > > Oh, that one must be old. > > > Adding the 0x12 case lead to a successful instantiated SPD AT24 EEPROM. > > i801_smbus 0000:00:1f.3: SMBus using polling > > i2c i2c-6: 2/2 memory slots populated (from DMI) > > at24 6-0050: 256 byte spd EEPROM, read-only > > i2c i2c-6: Successfully instantiated SPD at 0x50 > > at24 6-0051: 256 byte spd EEPROM, read-only > > i2c i2c-6: Successfully instantiated SPD at 0x51 > > > > And then, I decoded it successfully via decode-dimms. > > > > Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx> > > --- > > The result of decode-dimms could be found at http://kernel.montjoie.ovh/zoo/x05/decode-dimms.txt > > Since RAM is DDR, I wanted to add '/* DDR */' comment, but I didnt find any document with > > proof that this 0x12 is for DDR. > > It is. The document you are looking for is: > https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf > > and specifically section 7.18.2 (Memory Device — Type), table 78 > (Memory Device: Type). > Hello Thanks for the link, I will add it also as comment. > > > > drivers/i2c/i2c-smbus.c | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c > > index 07c92c8495a3..6dca19c994db 100644 > > --- a/drivers/i2c/i2c-smbus.c > > +++ b/drivers/i2c/i2c-smbus.c > > @@ -362,6 +362,7 @@ void i2c_register_spd(struct i2c_adapter *adap) > > } > > > > switch (common_mem_type) { > > + case 0x12: > > case 0x13: /* DDR2 */ > > case 0x18: /* DDR3 */ > > case 0x1C: /* LPDDR2 */ > > Please also add LPDDR (0x1B) for consistency. Will do it. Thanks Regards
