Some resource should be released if an error occurs in 'bcm2835_i2c_probe()'. Add an error handling path and the needed 'clk_disable_unprepare()' and 'clk_rate_exclusive_put()' calls. While at it, rework the bottom of the function to use this newly added error handling path and have an explicit and more standard "return 0;" at the end of the normal path. Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx> --- drivers/i2c/busses/i2c-bcm2835.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index 37443edbf754..a2f19b4c2402 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -449,13 +449,14 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) ret = clk_prepare_enable(i2c_dev->bus_clk); if (ret) { dev_err(&pdev->dev, "Couldn't prepare clock"); - return ret; + goto err_put_exclusive_rate; } irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!irq) { dev_err(&pdev->dev, "No IRQ resource\n"); - return -ENODEV; + ret = -ENODEV; + goto err_disable_unprepare_clk; } i2c_dev->irq = irq->start; @@ -463,7 +464,7 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) dev_name(&pdev->dev), i2c_dev); if (ret) { dev_err(&pdev->dev, "Could not request IRQ\n"); - return -ENODEV; + goto err_disable_unprepare_clk; } adap = &i2c_dev->adapter; @@ -481,7 +482,16 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) ret = i2c_add_adapter(adap); if (ret) - free_irq(i2c_dev->irq, i2c_dev); + goto err_free_irq; + + return 0; + +err_free_irq: + free_irq(i2c_dev->irq, i2c_dev); +err_disable_unprepare_clk: + clk_disable_unprepare(i2c_dev->bus_clk); +err_put_exclusive_rate: + clk_rate_exclusive_put(i2c_dev->bus_clk); return ret; } -- 2.30.2