A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.
More specifically, 'clk_prepare_enable()' is used, but 'clk_disable()' is
also already called. So just the unprepare step has still to be done.
Update the error handling path accordingly.
Fixes: 75d31c2372e4 ("i2c: xlr: add support for Sigma Designs controller variant")
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-xlr.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
index 126d1393e548..9ce20652d494 100644
--- a/drivers/i2c/busses/i2c-xlr.c
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -431,11 +431,15 @@ static int xlr_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(&priv->adap, priv);
ret = i2c_add_numbered_adapter(&priv->adap);
if (ret < 0)
- return ret;
+ goto err_unprepare_clk;
platform_set_drvdata(pdev, priv);
dev_info(&priv->adap.dev, "Added I2C Bus.\n");
return 0;
+
+err_unprepare_clk:
+ clk_unprepare(clk);
+ return ret;
}
static int xlr_i2c_remove(struct platform_device *pdev)
--
2.30.2
