[PATCH 11/12] Input: elantech - Prepare a complete software node for the device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Creating a software node and supplying that for the device
instead of only the device properties in it. A software
node was always created in any case to hold the additional
device properties, so this change does not have any real
effect.

This change makes it possible to remove support for the
problematic "dangling" device properties from i2c subsystem,
i.e. the "properties" member from struct i2c_board_info. The
problems caused by them are not related to this driver.

Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
 drivers/input/mouse/elantech.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 97381e2e03bae..2d0bc029619ff 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1885,8 +1885,6 @@ static int elantech_create_smbus(struct psmouse *psmouse,
 	};
 	unsigned int idx = 0;
 
-	smbus_board.properties = i2c_props;
-
 	i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-x",
 						   info->x_max + 1);
 	i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-y",
@@ -1918,6 +1916,10 @@ static int elantech_create_smbus(struct psmouse *psmouse,
 	if (elantech_is_buttonpad(info))
 		i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,clickpad");
 
+	smbus_board.fwnode = fwnode_create_software_node(i2c_props, NULL);
+	if (IS_ERR(smbus_board.fwnode))
+		return PTR_ERR(smbus_board.fwnode);
+
 	return psmouse_smbus_init(psmouse, &smbus_board, NULL, 0, false,
 				  leave_breadcrumbs);
 }
-- 
2.30.2




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux