Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Cc: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-cht-wc.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
index f80d79e973cd2..08f491ea21ac9 100644
--- a/drivers/i2c/busses/i2c-cht-wc.c
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -280,6 +280,10 @@ static const struct property_entry bq24190_props[] = {
{ }
};
+static const struct software_node bq24190_node = {
+ .properties = bq24190_props,
+};
+
static struct regulator_consumer_supply fusb302_consumer = {
.supply = "vbus",
/* Must match fusb302 dev_name in intel_cht_int33fe.c */
@@ -308,7 +312,7 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
.type = "bq24190",
.addr = 0x6b,
.dev_name = "bq24190",
- .properties = bq24190_props,
+ .swnode = &bq24190_node,
.platform_data = &bq24190_pdata,
};
int ret, reg, irq;
--
2.30.2
