Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> writes:
> Since we have generic definitions for bus frequencies, let's use them.
>
> Cc: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Acked-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
Thanks,
Gregory
> ---
> drivers/i2c/busses/i2c-mv64xxx.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
> index febb7c7ea72b..e803c6b0a947 100644
> --- a/drivers/i2c/busses/i2c-mv64xxx.c
> +++ b/drivers/i2c/busses/i2c-mv64xxx.c
> @@ -810,7 +810,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
> tclk = clk_get_rate(drv_data->clk);
>
> if (of_property_read_u32(np, "clock-frequency", &bus_freq))
> - bus_freq = 100000; /* 100kHz by default */
> + bus_freq = I2C_STANDARD_MODE_FREQ; /* 100kHz by default */
>
> if (of_device_is_compatible(np, "allwinner,sun4i-a10-i2c") ||
> of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
> @@ -846,14 +846,14 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
> if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
> drv_data->offload_enabled = true;
> /* The delay is only needed in standard mode (100kHz) */
> - if (bus_freq <= 100000)
> + if (bus_freq <= I2C_STANDARD_MODE_FREQ)
> drv_data->errata_delay = true;
> }
>
> if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
> drv_data->offload_enabled = false;
> /* The delay is only needed in standard mode (100kHz) */
> - if (bus_freq <= 100000)
> + if (bus_freq <= I2C_STANDARD_MODE_FREQ)
> drv_data->errata_delay = true;
> }
>
> --
> 2.25.0
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
