Since we have generic definitions for bus frequencies, let's use them.
Cc: Vladimir Zapolskiy <vz@xxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-lpc2k.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-lpc2k.c b/drivers/i2c/busses/i2c-lpc2k.c
index deea18b14add..159ebec5861c 100644
--- a/drivers/i2c/busses/i2c-lpc2k.c
+++ b/drivers/i2c/busses/i2c-lpc2k.c
@@ -396,7 +396,7 @@ static int i2c_lpc2k_probe(struct platform_device *pdev)
ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
&bus_clk_rate);
if (ret)
- bus_clk_rate = 100000; /* 100 kHz default clock rate */
+ bus_clk_rate = I2C_STANDARD_MODE_FREQ; /* 100 kHz default clock rate */
clkrate = clk_get_rate(i2c->clk);
if (clkrate == 0) {
@@ -407,9 +407,9 @@ static int i2c_lpc2k_probe(struct platform_device *pdev)
/* Setup I2C dividers to generate clock with proper duty cycle */
clkrate = clkrate / bus_clk_rate;
- if (bus_clk_rate <= 100000)
+ if (bus_clk_rate <= I2C_STANDARD_MODE_FREQ)
scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100;
- else if (bus_clk_rate <= 400000)
+ else if (bus_clk_rate <= I2C_FAST_MODE_FREQ)
scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100;
else
scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100;
--
2.25.0
