Since we have generic definitions for bus frequencies, let's use them.
Cc: George Cherian <gcherian@xxxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-xlp9xx.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index 8a873975cf12..4328b0fc6002 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -71,8 +71,6 @@
#define XLP9XX_I2C_SLAVEADDR_ADDR_SHIFT 1
#define XLP9XX_I2C_IP_CLK_FREQ 133000000UL
-#define XLP9XX_I2C_DEFAULT_FREQ 100000
-#define XLP9XX_I2C_HIGH_FREQ 400000
#define XLP9XX_I2C_FIFO_SIZE 0x80U
#define XLP9XX_I2C_TIMEOUT_MS 1000
#define XLP9XX_I2C_BUSY_TIMEOUT 50
@@ -476,12 +474,12 @@ static int xlp9xx_i2c_get_frequency(struct platform_device *pdev,
err = device_property_read_u32(&pdev->dev, "clock-frequency", &freq);
if (err) {
- freq = XLP9XX_I2C_DEFAULT_FREQ;
+ freq = I2C_STANDARD_MODE_FREQ;
dev_dbg(&pdev->dev, "using default frequency %u\n", freq);
- } else if (freq == 0 || freq > XLP9XX_I2C_HIGH_FREQ) {
+ } else if (freq == 0 || freq > I2C_FAST_MODE_FREQ) {
dev_warn(&pdev->dev, "invalid frequency %u, using default\n",
freq);
- freq = XLP9XX_I2C_DEFAULT_FREQ;
+ freq = I2C_STANDARD_MODE_FREQ;
}
priv->clk_hz = freq;
--
2.25.0
