Since we have generic definitions for bus frequencies, let's use them.
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-stu300.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 42e0a53e7fa4..d5fef98796bb 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -132,7 +132,7 @@ enum stu300_error {
#define NUM_ADDR_RESEND_ATTEMPTS 12
/* I2C clock speed, in Hz 0-400kHz*/
-static unsigned int scl_frequency = 100000;
+static unsigned int scl_frequency = I2C_STANDARD_MODE_FREQ;
module_param(scl_frequency, uint, 0644);
/**
@@ -497,7 +497,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
dev_dbg(&dev->pdev->dev, "Clock rate %lu Hz, I2C bus speed %d Hz "
"virtbase %p\n", clkrate, dev->speed, dev->virtbase);
- if (dev->speed > 100000)
+ if (dev->speed > I2C_STANDARD_MODE_FREQ)
/* Fast Mode I2C */
val = ((clkrate/dev->speed) - 9)/3 + 1;
else
@@ -518,7 +518,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
return -EINVAL;
}
- if (dev->speed > 100000) {
+ if (dev->speed > I2C_STANDARD_MODE_FREQ) {
/* CC6..CC0 */
stu300_wr8((val & I2C_CCR_CC_MASK) | I2C_CCR_FMSM,
dev->virtbase + I2C_CCR);
--
2.25.0
