Re: [PATCH v5 0/9] i2c: add support for filters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 24, 2019 at 08:30:35PM +0200, Wolfram Sang wrote:
> On Wed, Sep 11, 2019 at 08:24:14AM +0000, Eugen.Hristev@xxxxxxxxxxxxx wrote:
> > From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
> > 
> > Hello,
> > 
> > This series adds support for analog and digital filters for i2c controllers
> > 
> > This series is based on the series:
> > [PATCH v2 0/9] i2c: at91: filters support for at91 SoCs
> > and later
> > [PATCH v4 0/9] i2c: add support for filters
> > and enhanced to add the bindings for all controllers plus an extra bindings
> > for the width of the spikes in nanoseconds (digital filters) and cut-off
> > frequency (analog filters)
> > 
> > First, bindings are created for
> > 'i2c-analog-filter'
> > 'i2c-digital-filter'
> > 'i2c-digital-filter-width-ns'
> > 'i2c-analog-filter-cutoff-frequency'
> > 
> > The support is added in the i2c core to retrieve filter width/cutoff frequency
> > and add it to the timings structure.
> > Next, the at91 driver is enhanced for supporting digital filter, advanced
> > digital filter (with selectable spike width) and the analog filter.
> > 
> > Finally the device tree for two boards are modified to make use of the
> > new properties.
> > 
> > This series is the result of the comments on the ML in the direction
> > requested: to make the bindings globally available for i2c drivers.
> 
> Applied patches 1-7 to for-next (patch 3 is v6). Thanks for your
> patience and thanks to Ludovic and Peter for the review! Patches 8-9
> should go via the at91 tree.
> 

Thanks, patch 8 and 9 applied to at91-dt.

Regards

Ludovic



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux