On Wed, Sep 11, 2019 at 08:24:14AM +0000, Eugen.Hristev@xxxxxxxxxxxxx wrote: > From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> > > Hello, > > This series adds support for analog and digital filters for i2c controllers > > This series is based on the series: > [PATCH v2 0/9] i2c: at91: filters support for at91 SoCs > and later > [PATCH v4 0/9] i2c: add support for filters > and enhanced to add the bindings for all controllers plus an extra bindings > for the width of the spikes in nanoseconds (digital filters) and cut-off > frequency (analog filters) > > First, bindings are created for > 'i2c-analog-filter' > 'i2c-digital-filter' > 'i2c-digital-filter-width-ns' > 'i2c-analog-filter-cutoff-frequency' > > The support is added in the i2c core to retrieve filter width/cutoff frequency > and add it to the timings structure. > Next, the at91 driver is enhanced for supporting digital filter, advanced > digital filter (with selectable spike width) and the analog filter. > > Finally the device tree for two boards are modified to make use of the > new properties. > > This series is the result of the comments on the ML in the direction > requested: to make the bindings globally available for i2c drivers. Applied patches 1-7 to for-next (patch 3 is v6). Thanks for your patience and thanks to Ludovic and Peter for the review! Patches 8-9 should go via the at91 tree.
Attachment:
signature.asc
Description: PGP signature
